Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Stainless Steel Bottom Bracket BearingGenuine replacement bearing for Hope Bottom brackets using a 24mm axle. These are constructed with stainless steel cups and 2x rubber sealsFeatures:Size: 24mm (Inner Diameter) x 37mm (Outer Diameter) x 7mm (Depth)Material: Stainless SteelSeals: 2x Rubber SealQuantity: 1 Bearing
Hope Road Stainless Steel Bottom BracketThe eagerly anticipated road specific external bottom bracket is now available. The machined aluminium cups hold full stainless steel cartridge bearings.These custom, Swiss made bearings are double sealed, fully serviceable and removable which gives a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.Features: External bottom bracket designed for threaded bottom brackets The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Cartridge bearings are replaceable Designed to suit 24mm crank axles Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF41 Press Fit Stainless Bottom BracketDesigned and manufactured in the UK, this Hope Press Fit bottom bracket has stainless steel bearings and suits BB92 and BB89 bottom bracket shells. It's compatible with any crank with a 24mm axle, such as Shimano Hollowtech II chainsets and SRAM GXP (with separately sold adaptors). It can also easily be serviced with replaceable sealed bearings and external labyrinth seals.Features: Type: Press Fit Bearings: Stainless Steel Axle Compatible: 24mm Cup Diameter Measurements: 41mm external, 24mm internal Bearing cups thread into a centre tube to give a very secure, safe fit Easy to service and replaceable parts Specific fitting tool required - purchased separatelyManufacturer Reference Number: BBPF41SSN Weight: 112g (approx) Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Stainless Steel MTB Hub BearingDurable stainless steel bearing from Hope, this makes an ideal replacement for your MTB's hub.Features: Two Rubber Seals Full Stainless Steel BodyBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Stainless Steel MTB Hub BearingDurable stainless steel bearing from Hope, this makes an ideal replacement for your MTB's hub.Features: Two Rubber Seals Full Stainless Steel BodyBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Stainless Steel MTB Hub BearingDurable stainless steel bearing from Hope, this makes an ideal replacement for your MTB's hub.Features: Two Rubber Seals Full Stainless Steel BodyBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Hope brake hose kit can be cut with any good quality cable cutters and is coupled with updated and reusable fittings. The hose allows no expansion, even in the most extreme situations, transferring all your braking power from the lever to the caliper. It's also extremely tough as well as being more flexible than Hope's standard hose.
Features: External bottom bracket designed for threaded bottom brackets Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Free running labyrinth seal protects bearings and has less drag