The Status Downhill / BMX helmet redefines the standards for what a mid-level full face helmet should be. Incorporating design cues from our championship winning Aircraft helmet, the Status offers elevated performance and comfort at an exceptional value.The Status complies with ASTM F2032 and F1952, CPSC, CE, and AS Bicycle Standards. Key Features:Ultra-light design featuring fibreglass shell.Active cooling system maximizes airflow offering maximum ventilation while riding and also while rider is stationary. ,Washable comfort liner, cheek pads and chin strap covers. ,Engineered with 2 shell sizes and 2 EPS sizes to achieve the perfect fit. ,Compatible with inflatable emergency helmet release systems. ,Padded PU chinbar interior for enhanced impact protection. ,Adjustable visor with light-weight screws..
World Cup proven for years, and in contrast to our Gen3 carbon cranks, the Q Factor, overall profile, and volume of our Gen4 cranks has been greatly reduced. Spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance.The adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor.Smaller Q Factor, overall profile and volume. Spindle on non-drive side for easier chainguide setup and drivetrain maintenance. Adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. 8mm self-extractor. Key Features: Non-Boost, Boost, SuperBoost,Included APS Adjuster, Installation Tools, Crank Boots (x2), Sticker, User Manual,World-Cup DH-rated layup and construction, compacted carbon fiber, with additional 3k added to front and rear faces of crank for impact resistance,Width 73mm, Diameter 30mm, Interface P3 Connect™.
The Status Downhill / BMX helmet redefines the standards for what a mid-level full face helmet should be. Incorporating design cues from our championship winning Aircraft helmet, the Status offers elevated performance and comfort at an exceptional value.The Status complies with ASTM F2032 and F1952, CPSC, CE, and AS Bicycle Standards. Key Features:Ultra-light design featuring fibreglass shell. ,Active cooling system maximizes airflow offering maximum ventilation while riding and also while rider is stationary. ,Washable comfort liner, cheek pads and chin strap covers. ,Engineered with 2 shell sizes and 2 EPS sizes to achieve the perfect fit. ,Compatible with inflatable emergency helmet release systems. ,Padded PU chinbar interior for enhanced impact protection. ,Adjustable visor with light-weight screws..
The stages power l for shimano grx rx810 is built onto the non-drive side of a shimano grx rx810 crank arm and is compatible with all frames that fit shimano grx rx810 cranks. Specifications: Stages power accuracy: ±1.5% (compares with generation 2.0 accuracy: ± 2%), Weight: only adds 15gr to base crank arm, Battery life: 200+ hours (coin cell: cr2032), Power range (watts): 0 to 2500, Cadence range (rpm): 20-220, Water resistance rating: ipx7, Frame compatibility: most frames, see fit guide in our support section, Device compatibility: ant+, bluetooth smart ready, Software compatibility: stages link, training peaks, strava, garmin training center and others,. Additional Features: Active temperature compensation, Accelerometer based cadence measurement, Tool free battery replacement,Lifetime access to stages link for power meter management and firmware upgrade,.
Secure and easily adjustable to set your bars at the ideal height.Cold forged and heat treated for strength and stiffness,Adjusts through 60°,1 1/8" inch.
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.Bearing Code: ACB 4545 1125,Dimensions: 30.5 x 41.8 x 8mm,Angular Contacts: 45x45,ABEC: 3,Grade: 10,Grease: Kyodo Yushi PS-2,Application: Headsets,Weight: 19.24g.
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal.The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel.The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43, and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated.Key Features:Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness.,20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges.,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.,Small: 100mm x 100mm pedal body footprint,Large: 114mm x 111mm pedal body footprint,Available in red or black.Specification:Weight: 345g (Small), 375g (Large),Spindle: Forged scm 435 chromoly steel,Body: Forged 6061-T6,Inner bearing: Igus LL-glide bearing,Outer bearing: Igus LL-glide bearing,Body dimensions: 100mm x 100mm (Small), 114mm x 111m (Large),Pins: 10 adjustable pins per side,Warranty: 5 years.
Adjustable stem with integrated 60mm rider to provide additional handlebar lift. Includes a secure four bolt clamp.Strong 6061-T6 Alloy,Bar Bore: 31.8mm,Adjustment: -10° - +60°,Black,1 1/8”.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6000,Dimensions: 10mm x 26mm x 8mm,ABEC: 3,Grade: 10,Seals: 2RS,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 10.41g.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S608,Dimensions: 8mm x 22mm x 7mm,ABEC: 3,Grade: 10,Seals: 2RS,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 11.16g.