Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results Each Stages Power meter is calibrated individually to ensure a +/- 1,5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Stages Power R drive-side meter for added compatibility or upgrading an existing Stages Power L meter to Stages Power LR While not widespread there are some key bicycle models that are not compatibile with the non-drive crank arm based Stages Power meter because of interference with the power meter housing, for example Cervelo's P5 and many bikes with chainstay mounted brake calipers. Stages Power R offers increased compatibility with these models as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR (dual) meter systems. Features: Active temperature compensation Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet Wirelessly upgradable firmware LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit Updated accelorometer and addition of gyroscope for improved cadence resolution NFC tap to pair for some phones and devices Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications: Accuracy: +/- 1,5% accurate in all conditions Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head screw access on the drive side Weight: Only adds 35g (Stages Power LR) / 15g (Stages Power L) / 20g (Stages Power R) to base crank set Battery life: 175+ hours (Stages Power LR, via 2 coin cell: CR2032), 200+ hours (coin cell: CR2032) when used as a single sided Stages Power L or Stages Power R meter Power range (Watts): 0 - 2500 Cadence range (rpm): 20 - 220 Water resistance rating: IPX7 Compatibility: Stages Power L - Compatible with all Shimano Hollowtech II road drive side crank arms. Stages Power LR - Compatible with all Shimano Hollowtech II, 11-speed, road drivetrains. Stages Power R - Compatible with all Shimano Hollowtech II road left arms, but is only compatible with Dura-Ace R9100 or R8000 chainrings. *Does not include chainrings. Frame Compatibility - Most frames, see fit guide in our Support section Software Compatibility - Stages Link, Training Peaks, Strava, Garmin Training Center and others Device Compatibility - ANT+, Bluetooth Smart Ready
Stans No Tubes Flow S1 Mountain Bike WheelsetDurable and light, the Stan's No Tubes Flow S1 Mountain Bike Wheelset is ready to handle the toughest trails. Multiple World Cup Downhill (DH) winners have inspired the race-ready design of the Flow S1 wheelset making it the ideal addition to any keen rider looking to tackle challenging trails and reach the podium. Strong and Multi-purposeFeaturing reinforced rim walls with a 1.6mm deeper profile, the Flow S1’s offer greater impact strength for an even wider range of use. Despite this, they only have a minor weight increase over Stan’s other models. They’re constructed with a 32-hole spoke count front and rear, using easily replaceable standard spokes. Combined with Stan’s faster-engaging and CNC-machined Neo hubs, this wheelset is the ideal choice whether you ride trail, all-mountain, or enduro.Features: Durable and lightweight aluminium construction Wider rim width for more stability with larger tyres 3mm wider than Rapid 30 with no weight gain Developed on the World Cup DH circuit Rim profile optimised for 2.35" - 2.80” tyres Rim Internal Width: 29mm Rim External Width: 33.1mm Rim Depth: 17.6mm ERD: 566mm (27.5") / 604mm (29") Spokes: Sapim 2.0/1.8/2.0mm ETRTO: 584x29 (27.5") / 622x29 (29") Nipples: Secure Lock brass silver nipples ISO: 27.5"x33.1mm / 29"x33.1mm Hub: Stan’s Neo Tape: 30mm Hole Count: 32-hole, 32-hole Valve: 35mm Presta Rim Material: 6061 Alloy Max Spoke Tension: 125kgf (1225N) Max Rider Weight: 114kg (250lbs) Max Pressure with 2.4" Tyre: 37psi Max Pressure with 2.80" Tyre: 26psi Brakes: Disc Freehub Body: Neo Durasync Red Tubeless tape pre-installed Use: Aggressive Trail, All Mountain, Enduro, and Downhill Weight: 2034g (27.5”) / 2134g (29”)Technologies: WideRight: Rims that are too narrow fail to offer sufficient sidewall support and protection to your tyres and create a less stable shape. The result is less control in the corners, less traction on climbs, and more rolling resistance. Rims that are too wide also distort the tyre profile, decreasing traction and control and driving impacts directly into the rim, negating the impact absorbing advantages of a tyre's volume. Stan's WideRight rim widths are designed to strike the perfect balance between tyre volume and sidewall function. BST (Bead Socket Technology): Bead Socket Technology rims are designed to match the shape of your tyre's bead to create a safer and more secure airtight interface. BST rims secure the bead of the tyre, not the sidewall, creating an airtight seal while allowing the tyre's sidewall to expand to its true, rounder, more effective profile. The result is more traction and less rolling resistance. With lower-profile, less vulnerable sidewalls, Stan's BST rims are also lighter and stronger by design and accelerate more quickly. Buy Stan's No Tubes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%. e*spec hubs still have 6-degree engagement, but use an outboard bearing to better support the driver body and disperse loads. Mechanicsm is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection.All of our e*spec wheels can be used on any regular non-eBike. Wheelsets can be mixed or matched for either full 27.5+, full 29, or jump on the #mulletbus. Key Features: Engagement:6 Degree,Freehub Mount: XD Drive,Hub: e*spec rear hub, specially designed for eBike use.,Axle: Steel axle w/pinch bolt,Included: tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm endcaps,Spokes/Nipples: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Axle: 148 x 12mm,Drilling: 28h,Material: Aluminium 6069,Width: 35mm internal width.
The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repairIt features 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing,The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability,The PCS-9.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*,The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion,The PCS-9.3 is the perfect way to upgrade your home shop !, The new PCS-9.3 features: Fully adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts, Narrow clamping jaws (2.7/70mm) fit into tight areas or on short seat posts, Durable textured powder coat finish, Maximum weight capacity: 80lbs. (36kg), Height adjustable from 39 to 57 (990mm - 1450mm), Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm), Folds down to 44 x 14.5 (1140mm x 370mm), Weight: 16lbs. (7.2kg), QK2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray, Note :The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs, .
World Cup proven for years, and in contrast to our Gen3 carbon cranks, the Q Factor, overall profile, and volume of our Gen4 cranks has been greatly reduced. Spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance.The adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor.Smaller Q Factor, overall profile and volume. Spindle on non-drive side for easier chainguide setup and drivetrain maintenance. Adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. 8mm self-extractor. Key Features: Non-Boost, Boost, SuperBoost,Included APS Adjuster, Installation Tools, Crank Boots (x2), Sticker, User Manual,World-Cup DH-rated layup and construction, compacted carbon fiber, with additional 3k added to front and rear faces of crank for impact resistance,Width 73mm, Diameter 30mm, Interface P3 Connect™.
Lightweight, 30mm spindle, APS preload adjuster, and self-extractor bring the class-leading combo to your door. Crank boots included. Key Features: Lightest production crankset on market with ultra-lightweight carbon fiber crankarms, 30mm spindle,and APS adjuster.,73mm spindle,Compression molded carbon fiber arms, aluminum spindle,Spindle: Width 73mm, Diameter 30mm, Interface P3 Connect™,Q FACTOR: Mountain: 172mm,Chainline : 73mm Spindle: Boost (52mm) chainline w/UL Chainring,73mm Spindle: Non-Boost (49mm) chainline with a -8mm Offset Chainring,. Compatibility: Chainrings: UL Chainring, and SL Chainring, Bottom Brackets: 30mm PressFit Bottom Brackets, and Threaded Bottom Brackets.
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross rim built onto Hope s RS4 Straight Pull 6 bolt Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset. This is the most versatile and serviceable hub on the planet.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight Pull 24 HoleFreehub: Shimano / Sram CompatibleStainless Steel, Sealed Cartridge BearingsSpokes: Sapim Sprint Straight Pull Stainless Steel Double Butted with Brass NipplesWheel Size: 700cComes Supplied with QR and 142x12 End CapsApprox. Weight: 425g (Rim Only) 908g (Complete Wheel)