TRS Plus Cranks sport a one-piece non-drive arm and spindle that moves the spindle to the non-drive side for easier drivetrain maintenance. An adjustable chainline fits both Boost and non-Boost chainlines is achieved by placing spacers inboard or outboard of the chainring. Cranks include an 8mm self-extractor. Key Features: Chainline spacers achieve non-Boost, or Boost.,Spindle on NDS for easy drivetrain maintenance, adjustable chainline, and 8mm self-extractor,Included BB/lockring tool, lockring, APS adjuster, User Manual, and sticker,7050 Aluminum,Width: 68/73mm, Diameter: 30mm, Interface: P3 Connect,Q FACTOR: 169.5mm.
The home-mechanic s dream tool, the Effetto Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The Deluxe version is completed with cycling-specific bits and comes into a practical wrap package.This Deluxe version is equipped with a bicycle-specific bit set:Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 and T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, SRAM and Campagnolo high-end groupsets, plus those of reversed-bolt stems.10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.Capacity from 2 up to 16Nm: This is the best torque range for precision bicycle applications and sensitive components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to Use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other). Insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Minimal Fixed Head: Giustaforza s simple, non-ratcheting head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage.Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A State-of-the-Art Tool, Built to Last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.
Complete front wheel from Federal using their Stance Pro front hub laced with double butted spokes into a Stance XL rim. Includes hub guards. ###section### Product Specs WHEEL SIZE: 20" HUB: Federal Stance Pro AXLE: 10mm RIM: Federal Stance XL SPOKES: Double Butted NIPPLES: Brass WEIGHT: TBC
The S&M Adjustable Slidepipe V2 is a heavy-duty, portable BMX rail designed and built to withstand the rigors of even the heaviest street riders. Oversized, steel bases and commercial-grade, rubber feet keep the rail firmly in place while uprights made from square, steel tubing won't allow bases to twist, even without hardware. The super-strong, extruded, center connector has a thick spine featuring tapped threads that won't pull out, plus a reinforcement plate that spans all four connecter bolts for added strength. 8' long and 18" to 24" tall assembled, weighs 64 lbs.
The Troy Lee Designs Stage full face helmet with MIPS is a lighter, cooler and more protective enduro racing package than anything previously created.The Stage combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets.A Polylite shell with fibre reinforcement and Polyacrilite injected chin bar with EXOskeleton adds strength without sacrificing weight.11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions.The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package.Key FeaturesPolylite Shell construction with fibre reinforcement,Dual-density EPS and EPP foam offers protection against high and low-speed impacts,Featuring MIPS Brain Protection System: a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head,Large ventilation chin bar opening and 11 high-flow intake ports and 14 exhaust vents,Contoured 3D XT2 cheek pads and washable X-Static liner create an optimized fit,Innovative break-away visor screws,Fidlock® magnetic buckle system,Includes TLD helmet bag.
The home-mechanic’s dream tool, the Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The DELUXE version is completed with cycling-specific bits and comes into a practical wrap package.Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and ‘sensitive’ components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use:Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other). Insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Minimal fixed head:Giustaforza’s simple, ‘non-ratcheting’ head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage.Lightweight:The light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last:Functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched inscriptions, and it’s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.Controlled torque:The DELUXE version is equipped with a bicycle-specific bit set:bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, Sram and Campagnolo high-end groupsets, plus those of reversed-bolt stems.All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.Detail of bits:10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)
Welcome to the next evolution of the Racetrap - with an even larger field of vision and enhanced snugger fit. Featuring an optically correct spherical shield lens with a scratch resistant coating Racetrap 3.0 is expertly engineered to offer our most advanced fit optimized field of vision and uncompromising performance. Features Designed in California Superior optics with Ultra HD lenses made from crack and chemical resistant material 6 base spherical lenses for optimal protection and field of vision Interchangeable lenses 100% UV protection (UV400) Scratch resistant lens coating of the highest quality Hydrophobic and Oleophobic lens repels water dirt and oil Durable flexible and lightweight TR90 frame Ultra-grip rubber nose and temple tips provide a secure fit Available with contrast-defining HiPER® and photochromic lens options Comes with a hard case microfibre cleaning bag clear replacement lenses and extra alternative fit nose pads
Inspired by stylish racing designs from the past and infused with modern innovation the NORVIK™ employs technology and function to perform in any situation. Purpose-built side-shields add additional protection from the elements and unwanted peripheral glare the NORVIK™ also features premium lens options engineered to the highest quality standards in the industry. Highlights Designed in California Superior optics with Ultra HD lenses made from crack and chemical resistant material 5.5 base cylindrical lenses with a sleek comfortable frame design Interchangeable lenses 100% UV protection (UV400) Scratch resistant lens coating of the highest quality Hydrophobic and Oleophobic lens repels water dirt and oil Durable flexible and lightweight TR90 frame Ultra-grip rubber nose and temple tips provide a secure fit Available with contrast-defining HiPER® lens and PEAKPOLAR lens Comes with a hard case microfiber cleaning bag clear replacement lenses and extra alternative fit nose pads
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. 20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Available in red or black Specification Weight: 345g (Small) 375g (Large) Spindle: Forged scm 435 chromoly steel Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. 20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Available in red or black Specification Weight: 345g (Small) 375g (Large) Spindle: Forged scm 435 chromoly steel Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years
The Black Diamond Distance Carbon FLZ Poles boast a premium design that offers a fully adjustable, folding performance. These highly adaptable trekking poles deliver a 100% carbon construction, alongside FlickLock® Pro adjustability and a three-section foldable shaft. The lightweight and supportive Distance strap is also breathable and moisture wicking, and the ultralight EVA grip has just the right amount of comfort and non-scarring rubber Tech Tips.
The dependable Federal Aero XL Rim laced to the proven and tested female 14mm Stance cassette hub using Federal spokes. ###section### Product Specs WHEEL SIZE: 20" HUB: Federal Stance AXLE: Female 14mm DRIVE SIDE: Right Side Drive RIM: Aero XL SPOKES: Federal NIPPLES: TBC WEIGHT: TBC