Whether you are washing your bike after a muddy ride or installing shiny new parts, having a repair stand will make your experience easier, safer, and more enjoyable. Pedro's Folding Repair Stand gives an excellent solution in a versatile, strong, and easy to use package. When you are done for the day, the included bag makes transport and storage simple and easy.Durable three-point base is more stable than traditional tripod bases. 360-degree rotating head accepts tubes up to 65mm, and trigger grip makes for one-handed clamping action. Height adjusts from 1075 to 1875 mm and folds to a compact size for easy transport.Delivered with a sturdy black canvas bag.,Limited three-year warranty. ,Replacement parts are available..Instruction for UnfoldingUndo the lowest of the three quick release clamps.,Unfold both legs towards front of stand ensuring logos face upward. Close quick release clamp when legs are fully open.,Undo top most of three quick release clamps and pivot the head of the stand 270 degrees until it rests on top of stand horizontally facing the front of the stand. Close quick release clamp to lock in place.,Undo middle of three quick release clamps and slide the top tube, positioning the head at desired height. Close quick release clamp to lock in place.,Loosen rubber knob at the back of the head to release the front portion of the head, rotate front portion of head to desired angle. Tighten rubber knob to lock rotation of head. Clamps should be vertical if you are clamping a seat tube and horizontal if clamping a top tube. Be careful when clamping a frame tube as too much clamp force can crush the tube on some frames.,Before lifting bike into stand, try using the clamping mechanism. There are two main features. The clamp trigger which is large yellow plastic and the release which is small yellow and made of metal. The release controls the engagement of the clamp. When the release is switched up, the internal clamp mechanism is engaged and squeezing the trigger closes the clamp. When the release is switch down, the internal clamp mechanism is disengaged and the jaws slide freely inward and outward.,Make sure release is switched up. Lift bike positioning the seat tube between the clamp jaws. Squeeze the trigger repeatedly until the clamps have tightly clamped the bicycle into the stand.,If the angle of the bike needs to be adjusted, simply loosen the knob of the back of the stand, rotate bike to desired position, and tighten the knob again.,To remove the bike, switch the release to down position and pull the bike towards yourself to open the jaws.,
A dependable workstand for the home mechanic with a deluxe clampUses the 100-5D Professional Micro-Adjust ClampHeavy duty micro-adjustable linkage clamp fits frame tubes up to 3 inches (76 mm)Working height of clamp adjusts from 53 to 67 inches (34 to 170 cm)Infinite 360 degree rotation of clamp head for perfect positioningTapered rotational locking systemFolds flat for easy storageConstructed of powder coated steel tubing for durabilityRubber feet are adjustable for uneven floors
The Inceptor from Stay Strong is their introductory level bike range and has specifically chosen geometry and specs on each bike to suit the individual rider! Though being an entry level bike it's spec'd with parts usually seen on mid to pro range level bikes. Highlights of the inceptor include, Chromoly 3pc cranks, fully sealed bearings throughout, intergrated headtube and mid BB, 2.40" tyres & 25/9t gearing with sealed cassette hub. The Jr comes with a lower height steel frame and 18.5" Top Tube with 20" wheels for the smaller rider not quite ready for a full size 20". The Inceptor has options for every rider! ###section### Product Specs FRAME MATERIAL: Full Hi-Ten Frame WHEEL SIZE: 20" TOP TUBE LENGTH: 18.5" CHAIN STAY LENGTH: 13.25" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71° FORKS: 20" All Hi-Ten BARS: Hi-Ten 2pc 8" STEM: Forged Alloy Top Load, 40mm HEADSET: Sealed Intergrated BRAKE MOUNTS: Welded U-Brake Mounts BRAKES: Alloy lever & U-Brake FRONT HUB: Alloy 36h, Sealed Bearings, 10mm FRONT RIM: 36h Single Wall, Pinned Joint REAR HUB: Alloy 36h 9t Sealed Cassette Hub, 14mm Male Axle REAR RIM: 36h Single Wall, Pinned Joint TYRES: Innova 2.4" Front & Rear SPROCKET: Steel 25T CRANKS: 3pc Chromoly 165mm tubular with pinch bolt BB: Sealed Mid PEDALS: Slim nylon SEAT: Mid seat/post combo GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Full Size Bike with a Shorter Top Tube and geometry to Suit riders who are 4ft - 5ft 4" / 120cm -160cm A great all rounder suitable for any type of riding Sealed bearings throughout Strong and durable crankset Strong Hi-ten steel construction ###shogun-image-section###
The Inceptor from Stay Strong is their introductory level bike range and has specifically chosen geometry and specs on each bike to suit the individual rider! Though being an entry level bike it's spec'd with parts usually seen on mid to pro range level bikes. Highlights of the inceptor include, Chromoly 3pc cranks, fully sealed bearings throughout, intergrated headtube and mid BB, 2.40" tyres & 25/9t gearing with sealed 9t cassette hub. The Inceptor has options for every rider! ###section### Product Specs FRAME MATERIAL: Full Hi-Ten Frame WHEEL SIZE: 20" TOP TUBE LENGTH: 20.25" CHAIN STAY LENGTH: 13.25" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71° FORKS: 20" All Hi-Ten BARS: Hi-Ten 2pc 8.5" STEM: Forged Alloy Top Load, 50mm HEADSET: Sealed Intergrated BRAKE MOUNTS: Welded U-Brake Mounts BRAKES: Alloy lever & U-Brake FRONT HUB: Alloy 36h, Sealed Bearings, 10mm FRONT RIM: 36h Single Wall, Pinned Joint REAR HUB: Alloy 36h 9t Sealed Cassette Hub, 14mm Male Axle REAR RIM: 36h Single Wall, Pinned Joint TYRES: Innova 2.4" Front & Rear SPROCKET: Steel 25T CRANKS: 3pc Chromoly 170mm tubular with pinch bolt BB: Sealed Mid PEDALS: Slim nylon SEAT: Mid seat/post combo GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Full Size Bike with a Shorter Top Tube and geometry to Suit riders who are 4ft - 5ft 4" / 120cm -160cm A great all rounder suitable for any type of riding Sealed bearings throughout Strong and durable crankset Strong Hi-ten steel construction ###shogun-image-section###
The Ultegra R800 Stages Power meter fits all styles of R800 crankset, including: compact and standard. Riders looking to add power to their existing crank need only to match the crank length of their existing Ultegra R800 crankSPECIFICATIONS:Stages Power L Accuracy: ± 1.5% (compared with Generation 2 Accuracy: ± 2%),Weight: Only adds 20gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 to 2500,Cadence range (rpm): 20-220,Frame Compatibility: Most frames, see fit guide in our Support section,Crank Compatibility: All Shimano Hollowtech II road cranks,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURES:Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The power meter tech behind seven Grand Tour wins is now available for Cannondale’s latest HollowGram Si cranks, helping you unlock your true potential as a rider, whether you’re flying up mountain passes, testing your limits on gravel or going full send on the trails.The power meter tech behind seven Grand Tour wins is now available for Cannondale’s latest HollowGram Si cranks, helping you unlock your true potential as a rider, whether you’re flying up mountain passes, testing your limits on gravel or going full send on the trails.Stages Power has carried riders to five Tour de France victories plus wins in the Giro and Vuelta along with many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.ATC – Active Temperature CompensationThe consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is a key reason riders trust data from Stages Power no matter how much the day warms or temperatures plummet as you crest an Alpine peak.Individual Calibration For The Most Reliable ResultsEach Stages Power meter is assembled in Stages’ own state-of-the-art facility in Colorado, USA. Here every single unit is calibrated individually to ensure a +/- 1,5% accuracy level – an industry best for non-scientific power meters.SPECIFICATIONSStages Power L Accuracy: ± 1.5% (compared with Generation 2 Accuracy: ± 2%),Weight: Only less than 20gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURESTool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The stages power l for shimano grx rx810 is built onto the non-drive side of a shimano grx rx810 crank arm and is compatible with all frames that fit shimano grx rx810 cranks. Specifications: Stages power accuracy: ±1.5% (compares with generation 2.0 accuracy: ± 2%), Weight: only adds 15gr to base crank arm, Battery life: 200+ hours (coin cell: cr2032), Power range (watts): 0 to 2500, Cadence range (rpm): 20-220, Water resistance rating: ipx7, Frame compatibility: most frames, see fit guide in our support section, Device compatibility: ant+, bluetooth smart ready, Software compatibility: stages link, training peaks, strava, garmin training center and others,. Additional Features: Active temperature compensation, Accelerometer based cadence measurement, Tool free battery replacement,Lifetime access to stages link for power meter management and firmware upgrade,.
Whether you're training or trying to beat your personal best, this crankarm power meter is developed to help you achieve your goals. It features a single-sided power meter that's integrated into a non-drive-side Shimano GRX RX-810 crank arm. Delivering ± 1.5% accuracy in all conditions, this model allows you to benefit from its precise readings and its active temperature compensation. Coming equipped with 200+ hours of battery life, this version is more than capable of handling long-distance training sessions as you ride across the mixed terrains on your bike. One final highlight is it only adds a mere 15g of weight to your crankset, so you can enjoy its performance benefits without weighing down your ride. Additional features: ± 1.5% accuracy in all conditions Active temperature compensation Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset Updated accelerometer and addition of gyroscope for improved cadence resolution Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Water resistance rating: IPX7 This Shimano GRX RX810 Stages Power meter is compatible with all Shimano GRX cranksets. Frame Compatibility: Most frames, see fit guide in our Support section Device Compatibility: ANT+, Bluetooth Smart Ready Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center and others Technologies: Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. The consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system.
Stages Cycling Power L G3 - GRX R8100Designed for accurate results across mixed terrain conditions, this crankarm power meter is specifically engineered to be compatible with all Shimano GRX cranksets. Whether you're training on smooth roads or navigating across rocky gravel conditions, this model helps you to achieve your performance goals with ± 1.5% accuracy in all conditions. Single Sided Power MeterThis sleek model features a single-sided power meter that's integrated into a non-drive-side Shimano GRX RX-810 crank arm. This allows you to benefit from its precise readings and its active temperature compensation. Coming equipped with 200+ hours of battery life, this version is more than capable of handling long-distance training sessions as you ride across the mixed terrains on your bike. One final highlight is it only adds a mere 15g of weight to your crankset, so you can enjoy its performance benefits without weighing down your ride.Features: Type: Crank arm power meter Speed: 12 speed Power Meter: Single-single Crankset Compatibility: All Shimano GRX cranksets Accuracy: 1.5% Power meter housing: Low profile design, with robust door interface Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter Power Range (Watts): 0 to 5000 Cadence Range (rpm): 10-220 Water resistance rating: IPX7 Frame Compatibility: Most frames, see fit guide in our Support section Device Compatibility: ANT+, Bluetooth Smart Ready Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center and others ± 1.5% accuracy in all conditions Active temperature compensation Accelerometer based cadence measurement Wirelessly upgradable firmware LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset Updated accelerometer and addition of gyroscope for improved cadence resolution Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Weight: Only adds 15g to base crank armTechnologies: Tour Proven: Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation: The consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.. Individual Meter Calibration: For the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Buy Stages Cycling Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
A perfect match for the current crop of ultra-lightweight and capable dream bikes. Deluxe Ultimate offers a fully checked damper design allowing for a Low Speed Compression adjustment and optimal traction control tuning. Featuring Maxima Plush fluid for added performance and ride quality you can go on and shred till your heart’s content. Key Features: Fully checked damper design allowing for a Low Speed Compression adjustment and optimal traction control tuning,New Maxima Plush damping fluid reduces friction and silences damper noise,New graphics,Highly tunable DebonAir™ spring offers a coil-like consistent feel throughout the travel,Separate and independent open and threshold pistons tuned exactly for your ride. Technology: Counter Measure reduces the breakaway force of the shock to virtually zero pounds, transforming small bumps into traction-generating performance,Metric sizing allows both suspension and frame manufacturers to simplify rear shock sizing and fitment in addition to increasing bushing overlap, which results in better traction and improved durability,Developed with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperatures,DebonAir: A lightweight, highly tune-able air spring designed to offer a coil-like consistent feel throughout the travel - effortlessly soaking up the smallest hits and tracking the slightest changes in the terrain.,Measurement gradients indicating the current sag and travel settings are conveniently located on the upper tubes so that you always know how much travel you are running. You won’t find this anywhere else but RockShox.. Specifications: EYE TO EYE / STROKE: 210x55, 210x50, 230x65, 185x55(TR), 190x45, 230x60, 205x62.5(TR), 210x52.5, 190x40, 205x60(TR), 165x42.5(TR), 185x50(TR), 190x37.5, 190x42.5, 205x65(TR), 210x47.5, 230x57.5, 165x45(TR), 185x52.5(TR), 205x57.5(TR), 165x40(TR), 165x37.5(TR), 230x62.5, 205x50(TR), 185x47.5(TR),REBOUND TUNE: M, L,COMPRESSION TUNE: M, L, LC, L1, H,LOCKOUT FORCE: 380, 320,SHAFT HARDWARE: Standard, Trunnion, Bearing, No Bushing,BODY HARDWARE: Standard, Bearing, No Bushing,DAMPER TYPE: RCT,WEIGHT (G): 340,WEIGHT BASED ON: 210x50, 2 tokens, MM tune, standard/standard.
Park Tool Team Issue Repair Workstand PRS-22.2The PRS 22.2 Team Issue Repair Stand from Park Tool has been updated with a super-smooth and solid rotation system! It was designed originally for professional Pro Tour mechanics, to mount bikes for maintenance without clamping the frame, the bike is held in place by supporting the bottom bracket then locking either the front or rear dropouts. This stand functions perfectly with any modern axle standard, including Quick Release and every size of Thru-Axle without the need for adaptors. It is perfect for general cleaning and repair work, and it features a sturdy and solid tripod base, which folds compactly for storage; this stand is the mechanics ultimate partner.Features:Material: 6063 T6 lightweight Aluminium Adjustable BB Height: 76cm to 114cm Horizontal Rotation: 360° Main Beam Adjustment: Fore & Aft for optimised balance points Easily transported in the BAG-20 (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Originally perfected for Pro Tour mechanics, the PRS 22.2 Team Issue Repair Stand helps to mount bikes that are in need of essential maintenance. The solid rotation system allows you to approach your pride and joy from all angles and the fact it can function with any modern axle standard (including quick release and every size of thru-angle) ensures there is no need for adaptors. Extremely sturdy and sporting a solid tripod base, this Team Issue Repair Stand is the mechanics ultimate tool for applying that all-important fix to the bike. Should space be an issue, it also folds compactly.