Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This bottom bracket is the ultimate, serviceable, long-life upgrade for your frame/drivetrain when wanting to step away from the manufacturers standard BB.
Features: External bottom bracket designed for threaded bottom brackets Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Free running labyrinth seal protects bearings and has less drag
Fitted with high quality seals and bearings, our threaded bottom brackets are renowned for their durabilityKey FeaturesExternal bottom bracket designed for threaded bottom brackets,The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races,Custom Swiss made bearings are double sealed which gives a much greater life span than stock units,Cartridge bearings are replaceable,The unit is suitable for 68, 73, 83 and 100mm width bottom brackets,Designed to suit 24mm crank axles.Tech SpecsAll common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required),Available with replaceable stainless or ceramic bearings for less friction and greater durability,Designed to fit 24mm crank axles,Available for road, mtb, DH and Fatbikes,Free running labyryinth seal protects bearings and has less drag,Available in: black, silver, red, blue, purple and orange,Weight: 110g.
Versatile, technical daypack with excellent features and configuration. It’s that “one for all” backpack that knows no compromise when it comes to carrying comfort and back ventilation during biking. The series is characterised by the BRACE LINK carrying system, which adapts to the wearer’s individual shoulder width.Key Features: AIR FLOW CONTACT SYSTEM offers perfect back ventilation,BRACE LINK for optimal adjustment of the shoulder straps,Tool compartment (separate, quick-access),Material: N 210D RIPSTOP HD, 3D AIR MESH, AIROFLEX,Volume: 18L,Weight: 1000 g,Size: 28 x 50 x 12 cm,Material: Nylon 210/D Ripstop PU coated, P600/D PU coated, 3D Air Mesh, Air Mesh, Airo Flex,Emergency plan (integrated),BRACE LINK,Attachment system for: helmet (XC, full face), protection gear (stowable),Tool compartment (separate, quick-access),Rain cover (integrated),Accommodates hydration systems up to 3 l.Hydration bladder sold separately
POC Omne Air Resistance MIPS HelmetFrom a daily cycle commute to family leisure rides to extended off-road exploration, the POC Omne Air Resistance MIPS Helmet is a cycling helmet you can trust. It offers comfort and protection, whatever the bike you're on and the ride you have planned.Breezing along on your bike is one of life's simple pleasures, with the freedom to explore while getting a healthy dose of air. The Omne Air Resistance MIPS Helmet offers both comfort and protection on all your two-wheeled exploration. Safety comes via the amalgam of a tough outer shell and lightweight EPS foam liner. The polycarbonate shell ensures protection from minor knocks and bumps. In the event of a more serious fall, this also enhances the structural integrity of the helmet. The outer provides cover for the EPS foam liner. This is the layer that soaks up harder head impacts during a fall. The density and thickness vary in order to optimise protection where it's needed most. Extended protection around the temples and back of the head increase all-around protection, wherever you choose to ride.MIPS Integra Head Protection SolutionThe Omne Air also features the MIPS Integra system. This brings together POC's 'whole-helmet' safety and design ethos with the fully integrated brain-protecting technology of MIPS. This holistic approach sees every detail of the helmet engineered to work in harmony with each other, giving you new levels of seamless safety, comfort, ventilation, fit and function.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.360-degree Fit SystemIn order to keep the Omne Air in place, you’ll find POC’s 360° fit system. This offers an easy-to-operate and precise fit, ensuring your Axion remains comfortable when riding and stays securely in place in the event of a crash.FeaturesEPS Liner - lightweight EPS liner gives optimized protectionPC Shell - Polycarbonate shell enhances the structural integrity of the helmetMIPS Integra Head Protection SolutionDetachable peakAdjustable 360-degree fit systemDetachable peak - easy to detach and reattach the helmet peak, giving the flexibility to control helmet functionalityWeight: 350g (M)Certification - EN 1078Shop all MIPS helmets - Click hereBuy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
POC Omne Air Resistance MIPS HelmetFrom a daily cycle commute to family leisure rides to extended off-road exploration, the POC Omne Air Resistance MIPS Helmet is a cycling helmet you can trust. It offers comfort and protection, whatever the bike you're on and the ride you have planned.Breezing along on your bike is one of life's simple pleasures, with the freedom to explore while getting a healthy dose of air. The Omne Air Resistance MIPS Helmet offers both comfort and protection on all your two-wheeled exploration. Safety comes via the amalgam of a tough outer shell and lightweight EPS foam liner. The polycarbonate shell ensures protection from minor knocks and bumps. In the event of a more serious fall, this also enhances the structural integrity of the helmet. The outer provides cover for the EPS foam liner. This is the layer that soaks up harder head impacts during a fall. The density and thickness vary in order to optimise protection where it's needed most. Extended protection around the temples and back of the head increase all-around protection, wherever you choose to ride.MIPS Integra Head Protection SolutionThe Omne Air also features the MIPS Integra system. This brings together POC's 'whole-helmet' safety and design ethos with the fully integrated brain-protecting technology of MIPS. This holistic approach sees every detail of the helmet engineered to work in harmony with each other, giving you new levels of seamless safety, comfort, ventilation, fit and function.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.360-degree Fit SystemIn order to keep the Omne Air in place, you’ll find POC’s 360° fit system. This offers an easy-to-operate and precise fit, ensuring your Axion remains comfortable when riding and stays securely in place in the event of a crash.FeaturesEPS Liner - lightweight EPS liner gives optimized protectionPC Shell - Polycarbonate shell enhances the structural integrity of the helmetMIPS Integra Head Protection SolutionDetachable peakAdjustable 360-degree fit systemDetachable peak - easy to detach and reattach the helmet peak, giving the flexibility to control helmet functionalityWeight: 350g (M)Certification - EN 1078Shop all MIPS helmets - Click hereBuy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
POC Omne Air Resistance MIPS HelmetFrom a daily cycle commute to family leisure rides to extended off-road exploration, the POC Omne Air Resistance MIPS Helmet is a cycling helmet you can trust. It offers comfort and protection, whatever the bike you're on and the ride you have planned.Breezing along on your bike is one of life's simple pleasures, with the freedom to explore while getting a healthy dose of air. The Omne Air Resistance MIPS Helmet offers both comfort and protection on all your two-wheeled exploration. Safety comes via the amalgam of a tough outer shell and lightweight EPS foam liner. The polycarbonate shell ensures protection from minor knocks and bumps. In the event of a more serious fall, this also enhances the structural integrity of the helmet. The outer provides cover for the EPS foam liner. This is the layer that soaks up harder head impacts during a fall. The density and thickness vary in order to optimise protection where it's needed most. Extended protection around the temples and back of the head increase all-around protection, wherever you choose to ride.MIPS Integra Head Protection SolutionThe Omne Air also features the MIPS Integra system. This brings together POC's 'whole-helmet' safety and design ethos with the fully integrated brain-protecting technology of MIPS. This holistic approach sees every detail of the helmet engineered to work in harmony with each other, giving you new levels of seamless safety, comfort, ventilation, fit and function.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.360-degree Fit SystemIn order to keep the Omne Air in place, you’ll find POC’s 360° fit system. This offers an easy-to-operate and precise fit, ensuring your Axion remains comfortable when riding and stays securely in place in the event of a crash.FeaturesEPS Liner - lightweight EPS liner gives optimized protectionPC Shell - Polycarbonate shell enhances the structural integrity of the helmetMIPS Integra Head Protection SolutionDetachable peakAdjustable 360-degree fit systemDetachable peak - easy to detach and reattach the helmet peak, giving the flexibility to control helmet functionalityWeight: 350g (M)Certification - EN 1078Shop all MIPS helmets - Click hereBuy POC Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Road Stainless Steel Bottom BracketThe eagerly anticipated road specific external bottom bracket is now available. The machined aluminium cups hold full stainless steel cartridge bearings.These custom, Swiss made bearings are double sealed, fully serviceable and removable which gives a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.Features: External bottom bracket designed for threaded bottom brackets The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Cartridge bearings are replaceable Designed to suit 24mm crank axles Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Front race hub from Stay Strong, alloy fully sealed 36 hole hub with 20mm thru hollow axle. ###section### Product Specs AXLE SIZE: 20mm thru hollow axle male/female SPOKE HOLES: 36 BEARINGS: Sealed WEIGHT: 294g
The Stay Strong Reactiv 20mm Front Hub is an alloy, fully sealed hub with a hollow thru axle to shed some weight without sacrificing strength. Finished with updated Stay Strong branding. ###section### Product Specs AXLE SIZE: DRIVER TEETH: SPOKE HOLES: BEARINGS: WEIGHT: