Bleedkit.com's Basic Edge edition kit includes bare essentials for bleeding all SRAM hydraulic brakes. Fluid and bleed block not included. Compatibility This kit is compatible with absolutely all SRAM hydraulic brakes including 2017+ hydraulic brakes with Bleeding Edge bleed port. Also compatible with all Avid (Elixir, Juicy...) and all older type Formula hydraulic brakes (Oro, C1, R1, R0, K24, K18...). Not compatible with Formula Cura hydraulic brakes. Manufacturer's Part Number: BK-80010 Multi One Size All SRAM Models
The SRAM X5 rear derailleur uses Exact Actuation for precise and dependable 10-speed performance and uses Direct Route Technology for lighter effort shifting. Technologies: Direct Route: Direct Route Technology doesn't have a middle man. Instead, the cable routes directly to the actuation mechanism. Result? Less friction. Less effort. More oomph. Plus it's impervious to cable housing damage. Nice. Exact Actuation™: Simplified and stabilised shifting over tight cog spacing found on modern cassettes. By using exact cable tension, the end result is the easiest index shifting system to set up and it stays that way.
At 200mm in length, this replacement hose kit has all the length you need to cut it to suit the size of your bike and it's individual hose routing.
The SRAM Red 22 11 speed chain features more heavily chamfered outer plates for improved shifting and quieter running. Other advancements include a new inner plate finish plus chrome hardened pin construction, both for longer chain life. The HollowPin construction of SRAM's 11 speed chain provides smooth, precise shifting and weight savings without sacrificing strength. Technologies: PowerChain II: Extremely strong. Incredibly precise. SRAM's PowerChain II increases front and load shifting performance without sacrificing rear shifting precision. The Step2 riveting process increases the Push Pin Power for increased strength and durability. PowerLock: SRAM chain engineers developed PowerLock as a tool free, sure and consistent way to connect our 11 speed chains. While PL does not require special tools for install, the especially tight tolerances of 11 Speed drive trains mandated that each PowerLock is good for a one-time application only. HollowPin Technology: Equals strength, incredible shifting efficiency, and lightweight. PowerLube: High-performance grease.
SRAM X5 9 Speed Rear DerailleurThe SRAM X5 Rear derailleur is a 9 speed mech which uses a 1:1 cable pull ratio and is compatible with all SRAM 9 speed MTB shifters. Coming in long and medium cage, allowing you to cover up to a 45T sprocket.Features: Material: Alloy B-Knuckle, Alloy Links, High Strength Grilon Composite P-Knuckle Capacity: Medium 37T; Long 45T Compatibility: All SRAM 9 speed MTB shifters with a 1:1 ratio Gears: 9 speed only Mount Type: Standard hanger type mount Clutch Type: No SRAM Exact Actuation for precise & dependable shifting performance Direct Route Technology for lighter effort shifting Weight: 360g (Long cage)Manufactuer Reference Codes:Black Long Cage: 00.7515.082.000; Black Medium Cage: 00.7515.082.010; Silver Long Cage: 00.7515.082.020;Silver Medium Cage: 00.7515.082.030Technologies: Exact Actuation - When SRAM launched the road technology from scratch, they reapplied their MTB proven SRAM 1:1 actuation ratio (shifter cable travel: derailleur movement) for 9 speed rear shifting. Exact Actuation helps to simplify/stabilise the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way. MatchMaker Compatible - Save weight and clutter on the bar with MatchMaker. This system holds AVID levers, a number of SRAM triggers and the RockShox PushLoc control—all with one tidy, light clamp.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.Black Long Cage: 00.7515.082.000Black Medium Cage: 00.7515.082.010Silver Long Cage: 00.7515.082.020Silver Medium Cage: 00.7515.082.030
SRAM Red Brake Shoe and Pad SetSRAM Red Brake Pad and Holders are the ideal replacements to fit to your dual pivot SRAM Red calipers. They have a standard compound that's designed for use on alloy rims and performs well in all conditions. Features: Pads wear evenly and maximise caliper braking power Simple to replace Includes two pads and holdersBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide-DB5 Hydraulic Disc Brake Hose KitReplacements for SRAM hydraulic disc brakesSpecificationsLenght: 2000mmCut-to-fit tubing kits for front or rear applicationsBuy SRAM Guide-DB5 Hydraulic Hose Kit from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM PressFit 30 Alloy Bottom BracketTaking inspiration from the popular BB30 model, the PressFit 30 Alloy Bottom Bracket from SRAM gives you the best of both. Constructed from durable alloy, the seal is pre-assembled into the cups for long-lasting quality.The key difference with PressFit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets.Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. PressFit 30 for road will require a 68mm wide shell while PressFit 30 for MTB will require a 73mm wide shell.Features: Easy installation PressFit cups for lighter weight Narrow Q-factor and more ankle clearance Integrated gutter seal to prolong the life Integrated adjuster Type: Press Fit 30 Material: Alloy Spindle diameter: 30mm Bearings: Steel - 40x30x7 Part No: BB-PF30-B2Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SRAM Apex 1 crankset completes the Apex 1 group, SRAM's most affordable road 1x™ drivetrain yet. Using patented X-Sync™ technology, the Apex 1 crankset runs silent and secure. Riders looking for a wide gear range and shifting simplicity at a great value will find it in Apex 1. Technologies: X-SYNC™: SRAM X-Sync™ 1X chainrings provide the highest level of performance and durability. The SRAM X-SYNC™ tall square teeth edges engage the chain earlier than traditional triangle-shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC™ chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC™ rings are an integral part of the SRAM 1X™ drivetrain.
Featuring an integrated seal that’s pre-assembled into the cups, SRAM’s PressFit 30 bottom bracket is designed to keep out dirt and water that could cause increased wear and tear. Simple to fit, it is designed for road and mountain bike (MTB) frames with bottom bracket shells with a 46mm inner diameter and cranksets with 30mm diameters. The key difference with PressFit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner diameter bottom bracket shell to accommodate this system. PressFit 30 for road will require a 68mm wide shell while PressFit 30 for MTB will require a 73mm wide shell. When designing the SRAM PressFit 30 bottom bracket, the brand set out with the aim of combining the best of BB30 technologies with the best features of the Pressfit standard. The result of this is a sealed 30mm bearing system with superior bearing life. Manufacturer's Part Number: 00.6418.009.000
Bleed Kit Basic SRAM Brake Bleed KitBleedkit.com's Basic Edge edition kit includes bare essentials for bleeding all SRAM hydraulic brakes. Fluid and bleed block not included.Compatibility:This kit is compatible with absolutely all SRAM hydraulic brakes including 2017+ hydraulic brakes with Bleeding Edge bleed port. Also compatible with all Avid (Elixir, Juicy...) and all older type Formula hydraulic brakes (Oro, C1, R1, R0, K24, K18...). Not compatible with Formula Cura hydraulic brakes.Features: 2x 20ml Becton & Dickinson syringes 2x M5 assembly 1x Edge assembly Spare O-ringsManufacturer's Part Numbers: BK-80010 Multi One Size All SRAM ModelsBuy Bleed Kit Components from Chain Reaction Cycles, the World's Largest Online Bike Store.