Cannondale CAAD13, Supersix EVO, Supersix EVO NEO, SystemSix Front Speed Release Thru Axle, 100x12, K83019. M12 x 1, double-lead thread.
Cannondale CAAD13, Supersix EVO, SystemSix Rear Speed Release Thru Axle, 142x12, K83029.165mm M12 x 1, double-lead thread. NOTE: To swap this axle in order to use the SystemSix on a turbo you will need a new derailleur hanger with a single-lead thread, such as this one Cannondale Synapse Carbon 2018, Slate, SuperX, Topstone Derailleur Hanger for 12mm, KP419, K33049. which will then allow you to use the trainer axle Tacx trainer axle M12 x 1mm Fine Thread.
Speed Wing, the innovative outer plate, ensures particularly rapid and silent shifting on Connex 11-speed chains. The newly developed peripheral chamfering of the outer plate ensures optimum chain guide and gear-changing performance. And for optimal absorption of the high shear forces through extreme transmission, Connex have implemented a completely innovative process for radial riveting. This process, in combination with a special pin coating, guarantees top performance and long wear.
Classed as Box's most durable shifter, this 9 speed model features a hard-wearing two-piece resin and steel lever construction, which makes it more than capable of handling all the intensity from exploring the MTB trails. The Box Two shifter is the only shifter on the market (other than our Box One) that comes factory stock with a hinged clamp. Box Two is our performance tier so this shifter still maintains the durable cast aluminium top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Compatibility: • Box One Prime 9 11-50T Cassette Black • Box Two Prime 9 11-50T Cassette Black • Box Three Prime 9 Cassette Black • Box One Prime 9 Chain 126L DLC Black • Box Two Prime 9 126 Link Chain Nickel • Box Three Prime 9 126 Link Chain Polished • Box One Prime 9 Rear Derailleur • Box Two Prime 9 X-Wide Rear Derailleur Black • Box Three Prime 9 X-Wide Rear Derailleur Black • Multi Shift Option Not Intended for E-Bike Use • Single Shift Option Recommended for E-Bike Use FAQ - Does the Box Two Prime 9 Shifter come with a cable? Yes. All Prime 9 Twin Lever Shifters come with a stainless steel shift cable. - How do I remove the cap from the cable port to install a new cable? To remove it, use a Phillips head screwdriver and turn it counter-clockwise a quarter turn You can then push the cap out by applying pressure to the cable from the other side. Please Note: The Cable Port is not a screw that un-threads from the cable port if you turn the cable port screw more than 90 degrees damage may occur. - Is the Box Two Prime 9 Shifter compatible with other 9 speed derailleurs? No, traditional 9 speed systems use a Cable Pull that is not compatible with Prime 9.
Engineered for use with SRAM 1x11-Speed drivetrains, these bar end shifters are indexed for rapid and precise gear shifts up and down your cassette. Plus, they are machined from aluminium for a strong and dependable performance while also being lightweight. Key Features: Bar-End Shifters for 1 x 11 Speed Right side: Index / Friction transferable SRAM MTB 11 Speed System compatible Features: Model No.: BS-SR-M11-R Mount Type: Bar End Cassette Compatibility: 11 Speed Rear Shifting: Index / Friction Transferable Bracket Material: Anodized Cold Forged Aluminium Shift Lever Material: Anodized Cold Forged Aluminium Bar Size: 19.0 - 22.0mm Shift Cable: Stainless Slick Weight: 150g Compatibility: SRAM 11 Speed MTB Derailleur Compatible
The Brand-X 12 speed MTB cassette is the perfect replacement for your 12 speed cassette. Available in both 11-50t and 11-52t options depending on your ratio requirement. The cassette uses a standard Shimano HG spline and its high tensile steel cogs are mounted on a 7075 alloy spider for maximum durability while keeping weight to a minimum. The tooth profile has also been optimised to aid gear changes and reduce noise. The 11-50 cassette option is fully compatible with SRAM and Shimano, while the 11-52t cassette option is compatible with SRAM drivetrains.
The Cadet packs in a level of performance aimed at value-driven riders that want a solid crank. With stiff and solid forged-aluminium arms, a stout M30 alloy spindle and a direct mount ring interface, the new Cadet M30 checks all the boxes. With updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of trail riding. Wave Tech Chainrings Tough enough for enduro, downhill, and also weight conscious for XC riding, Praxis MTN Wave rings are machined from 7075 T6 aluminium and hard anodised to take a beating. Their tough aluminium construction makes them hard-wearing and reliable as you weave from trail to trail, while their hard anodised finish gives them additional protection against corrosion during wet riding conditions. Press Fit BB-90 Bottom Bracket This chainset comes complete with a Praxis Works M30 Press Fit BB-90 bottom bracket. Praxis M30 bottom brackets have a 30mm Drive and a 28mm NonDrive Bearing. These are specifically made for use with Praxis M30 spindle cranks. A drive-side wave washer is used for preload of the bearings. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe. Manufacturer's Part Numbers: 89222988 Black 36/26T 170mm 89222989 Black 36/26T 175mm
The Sunrace MS3 cassette is suitable for use on both Shimano and SRAM 1x10 speed setups and with its large 42T climbing gear it enables you to drop a shifter, derailleur and to run a single chainring up front. This helps you to lower the overall weight of your bike, simplify your drivetrain, yet still have the gear range to conquer the trails.
This top-quality model helps you dominate every run thanks to its extended inner plate which improves chain engagement and retention for superior acceleration and gearing. It's simple to connect to your bike thanks to its Quick-Link, which makes installation a breeze. Weighing in at only 252g (approx), you'll not have to worry about adding any unnecessary weight to your drivetrain while enjoying a more confident ride. The M8100 chain provides enhanced chain retention thanks to an extended portion of the inner plate. The new chain features quick-link assembly and SIL-TEC treatment for extended offroad durability. Hyperglide+ Gear Shifting Smoothness and Precision Hyperglide+ drivetrain’s redesigned cassette and chain promote the next generation of MTB riding by enhancing speed, shifting efficiency and smoothness over any terrain. It will help kickstart the next generation of mountain bike riding by introducing continuous pedalling over virtually any terrain. This revamped drive system and dedicated chain deliver fast-shifting, efficient power transfer and chain stability like you’ve never experienced before. It helps riders adapt to drastically changing trail conditions by precisely judging the optimal shifting moment for consistently smooth operation. Plus, with Shimano's QuickLink system, you have a tool-free chain assembly that provides great convenience and confidence when assembling your drivetrain setup.
microSHIFT BS-M11 Bar End Shifters Shimano 11 SpeedIdeal for off-road trail riding, the microSHIFT BS-M11 are suited to cross-country and all-mountain adventures. Engineered for use with Shimano 2/3x11-Speed drivetrains, these bar end shifters are indexed for rapid and precise gear shifts up and down your gear range. Plus, they are machined from aluminium for a strong and dependable performance while also being lightweight.Key Features: Bar-End Shifters for 2/3 x 11 Speed Right side: Index / Friction transferable Shimano MTB 11 Speed System compatibleFeatures: Model No.: BS-M11-R Mount Type: Bar End Cassette Compatibility: 11 Speed Rear Shifting: Index / Friction Transferable Bracket Material: Anodized Cold Forged Aluminium Shift Lever Material: Anodized Cold Forged Aluminium Bar Size: 19.0 - 22.0mm Shift Cable: Stainless Slick Weight: 150g Compatibility: Shimano 11 Speed Mountain Bike (MTB) Derailleur CompatibleBuy microSHIFT Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X 12 Speed MTB CassettePerfectly suited for the rigours of modern mountain bike (MTB) riding, this 12 speed cassette is equipped with high tensile steel cogs on a 7075 alloy spider for maximum strength and durability. Brand-X has also kitted out this trail-ready model with a standard Shimano HG spline and a tooth profile that has also been optimised to aid gear changes and reduce noise. Available in both 11-50t and 11-52t options depending on your ratio requirement, this is a great choice of upgrade for replacing your old 12 speed MTB cassette and benefitting from smooth and consistent performance.The 11-50 cassette option is fully compatible with SRAM and Shimano, while the 11-52t cassette option is compatible with SRAM drivetrains.Features: Material: High Tensile Steel cogs on a 7075 Alloy Spider Use: Mountain bike (MTB) Ratio: 50T Option: 11-13-15-17-19-21-24-28-32-36-42-50; 52T Option: 11-13-15-18-21-24-28-32-36-40-46-52 Freehub Compatibility: Shimano HG freehubs Chain Compatibility: 12 Speed chainsBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X 12 Speed MTB CassettePerfectly suited for the rigours of modern mountain bike (MTB) riding, this 12 speed cassette is equipped with high tensile steel cogs on a 7075 alloy spider for maximum strength and durability. Brand-X has also kitted out this trail-ready model with a standard Shimano HG spline and a tooth profile that has also been optimised to aid gear changes and reduce noise. Available in both 11-50t and 11-52t options depending on your ratio requirement, this is a great choice of upgrade for replacing your old 12 speed MTB cassette and benefitting from smooth and consistent performance.The 11-50 cassette option is fully compatible with SRAM and Shimano, while the 11-52t cassette option is compatible with SRAM drivetrains.Features: Material: High Tensile Steel cogs on a 7075 Alloy Spider Use: Mountain bike (MTB) Ratio: 50T Option: 11-13-15-17-19-21-24-28-32-36-42-50; 52T Option: 11-13-15-18-21-24-28-32-36-40-46-52 Freehub Compatibility: Shimano HG freehubs Chain Compatibility: 12 Speed chainsBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.