These end caps can be used to convert your hub to a different spacing or replace a lost cap. Compatibility Chart & How to Fit End Caps Please click here to determine which hubs can be converted, as the caps only fit the original specific hub options. End Caps: Changing end caps is simple and no tools are required. Just pull off the end caps on the hub and then push the new ones on. Where the end caps are not identical, the non-driveside always has the wider flange to cover the bearing. All caps sold as pairs and only compatible with Nukeproof Neutron V2 hubs.
This freehub body features a tough alloy construction, which makes it perfect for replacing your old or worn-out existing model. Suitable for use only on Nukeproof Horizon V2 hubs, this freehub body is designed for quick and easy installation. Options: · Shimano HG · Shimano Microspline · SRAM XD A new hub seal and bushing is supplied with Nukeproof freehubs. Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub. Microspline freehubs also include the driveside end cap so you can easily convert an HG / XD hub to microspline If you are converting a microspline hub to XD or HG, you will also require a new driveside end cap which can be bought here ( ) This freehub is only compatible with Nukeproof Horizon V2 hubs. For step-by-step fitting instructions click here. Freehubs: Installation Instructions: 1. Remove driveside end cap 2. Pull off old freehub turning anticlockwise as you pull 3. Check hub seal for damage, if it is damaged remove the seal 4. If seal was removed, press on new seal 5. Apply grease hub ratchet ring 6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise 7. Refit driveside end cap
This set contains four pawls and four springs, plus a plastic cover for the freehub.
This kit contains all the parts needed to convert your 148mm Nukeproof Neutron HG / XD hub to have a microspline freehub. Please note this kit requires the hub to be stripped, a step by step guide to do this can be found here.
This non-driveside seal fits all Nukeproof Horizon and Neutron v2 rear hubs. Hub Seal Changing this seal is easy by following the instructions below: 1. Remove non-driveside end cap 2. Take a thin flat head screwdriver and gently prize off the old seal 3. Push new seal in place 4. Refit non-driveside end cap
Featuring an adapted head which allows the tyre insert to sit on top of the valve, the shape of the head allows for easy inflation and deflation. Each valve has a removable core allowing you to get maximum air flow from your tubeless pump or CO2 cartridge. The specially-designed custom cap features a core remover built in so you can remove & tighten the core without any additional tools. The nut has also been designed so that you can get a good grip on the flat edges to tighten the valve in the rim. An O-ring is also provided which sits against the outside of the rim and provides an airtight seal while preventing damage to the rim from the nut on the valve. How to Install Remove valve cap and nut, insert valve through rim, fit O-ring to valve then thread nut on and tighten by hand.
If you want to restore your Horizon CS pedal's peformance to its original level, this genuine replacement Nukeproof rebuild kit is sure to do the job.
This Nukeproof Horizon Freehub Body is a genuine, high-quality replacement cassette body which is compatible with Shimano 9, 10 and 11-speed cassettes.
This lightweight alloy freehub body features a 30-Tooth ratchet that provides exceptional drivetrain strength and increased engagement, which supplies a superfast power-transfer and acceleration from rider to trail. High-Quality Nukeproof have fitted this freehub with two high-quality, sealed cartridge bearings inside the freehub and a low friction seal that sits between the freehub body and the hub bearings, this effectively eliminates bearing contamination from dirt, mud and water.
Part of the ABEC-5 line, these bearings are the revised LLU/LLB dual seal bearings. They place an LLU full contact seal on their outside facing surface, while the Inboard facing LLB medium contact seal allows for less drag. Their specific seal also increases their lifespan and offers exceptional performance. High precision balls are within 5/1,000,000″ round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade. The Nukeproof Enduro 61805 ABEC5 V2 Hub Bearing Pair is only suitable for converting the front hub of the Nukeproof Horizon V2 and Neutron V2 from 15mm to 20mm axles. This bearing will also fit many other hubs that use this size of bearing. This superb bearing sets the benchmark for high precision bearings.
Genuine Nukeproof high-quality replacement parts.
Genuine replacement Nukeproof spare parts.