Ultra-light and pliable, this mountain bike tubeless rim tape will give you the perfect base to begin your tubeless conversion.
This trail-ready mountain bike stem features a tough aluminium construction, which allows it to provide a stable and secure interface between your handlebars and your fork's steerer tube. Spank has also equipped this version with an ultra-short stack height and zero degree rise, so riders can benefit from snappier steering and increased comfort on their off-road adventures. Coming complete with a 35mm bar clamp diameter, this model is easy to install using its four-bolt clamping area to safely tighten it to your mountain bike's handlebar.
Steering you between the trees and across the mountain, this riser bar is equipped with a tough alloy construction for enduring the intensity of all-day epics. Spank has also gone the extra distance by putting this trail-ready riser bar through a shot-peening and anodising process. This gives it an extra layer of durability as well as protection against corrosion on the wettest of rides. Perfect for riding in all weather conditions, this riser bar gives you precise steering on the most demanding of mountain bike trails.
This front MTB hub features a robust alloy construction, which allows it to handle all the intensity that comes with all-day epics in the mountains. Spank has also gone the extra distance, by equipping this version with a matte anodised finish. This means that you'll benefit from its fantastic durability and corrosion resistance, as you embrace the trails in wet riding conditions. Weighing in at only 136g, this is an excellent choice of upgrade for riders who want a reliable front hub, without adding unnecessary weight to their MTB. - Highly weight optimized, race inspired front hub - 28 bearings minimize overall weight, and allow adaptability up to 15mm thru axles - Unique flange design reduces dish requirement and minimizes tension range between drive side and non-drive side spokes - Compatible with Ø28 HEX Boost front hub adapters only - Advanced seal system improves prevention of bearing contamination
This axle replacement kit is 100% compatible with all earlier versions of the Spank Spike and Oozy pedals from 2015 onwards. This means that there's no need to replace your entire pedal set if your current Spank pedals are still in their original bombproof perfect working order. Ideal for riders who want to breathe new life back into their existing pedals and upgrade their set-up with this pedal axle replacement kit. Please note: Bearings are not included but are available separately. Manufacturer's Part Number: F34E02000022SPK Black One Size
Please note that internal bearings are sold separately. Kits Include: Spike 2011-2014 (Part Number: F34E02000002SPK) - 1 set L&R axle 2pcs IGUS bushing 2pcs O-ring 2pcs dust cap 2pcs stainless shim washer 2pcs friction seal 2pcs lock nut Spike/Oozy 2015 (Part Number: F34E02000012SPK) - 1 set L&R axle 2pcs IGUS bushing 2pcs O-ring 2pcs dust cap 2pcs stainless shim washer 2pcs friction seal 2pcs lock nut
Ready for aggressive MTB rides, this bearing kit is specifically designed for replacing your worn out or lost Spank Spike pedal bearings. It features two sealed cartridge bearings, which allow you to breathe new life back into your MTB pedals.
Filled with an innovative Vibrocore foam, this Spank Flare 25 bar limits harmful vibrations while improving strength and longevity from the inside out. Built from a special Zirconium-Doped 7-Series alloy, it is designed with a round profile upper section which facilitates a wide range of rider/hand positions, while the 25-degree flare in the drops gives you plenty of room and support when riding low. Additional Bar Width Information: Width Between Bar Ends: 420mm: 562mm; 440mm: 582mm; 460mm: 602mm; 480mm: 622mm; 500mm: 642mm; 520mm: 662mm
This rear hub adaptor is ideal for riders who want to change their rear axle setup. Available in various axle sizes to choose from.
Perfect for breathing new life back into your worn-out MTB pedal bearings, this bush kit contains all you need to get them spinning smoothly again. Coming equipped with sealed bearings, bushings, seals and o-rings, this kit is an excellent solution for bringing your pedals back to performing how they were when you first got them.
Ready for aggressive MTB trail-riding, this replacement pedal bushing kit helps to eliminate any wobbling that develops over time with your Spank Spike pedals. It features all the bushings, seals and washers that are required to successfully replacement your old or worn-out existing pedal bushings.
These mountain bike (MTB) pedals come trail-ready with a rock-solid alloy pedal body construction that's 2D forged and CNC optimised for maximum strength, without adding any unnecessary material or weight. Spank has also kitted these out with a cold-forged chromoly (CrMo) steel axle for extra toughness as you charge across demanding mountain terrain conditions. Thanks to each pedal's crank boot compatible axle, you can fit crank boots to the end of your crank arms and attach them to the pedal axle without any issues. As a result, you'll enjoy greater protection and durability when conquering your way from trail to trail. Please note crank boots are available to purchase separately. Trail-Ready MTB Pedals with Industrial Sealed Bearings Whether you're into all mountain, enduro, trail or even electric mountain bike riding, these versatile pedals are engineered for dependable pedalling performance, whatever your discipline. Spank has equipped these with industrial sealed bearings and an IGUS bushing, which offer extra sealing and protection against the elements making them ideal for all weather and trail conditions. Thanks to their super-slim 12mm profile with chamfered leading edges, they also ensure maximum pedal clearance, while their 18 steel pins deliver fantastic grip. Tipping the scales at 372g (pair), these are a great choice of upgrade for smooth and reliable pedalling, wherever your next adventure takes you. Technologies: - Super slim 12mm for maximised pedal clearance. - CNC weight-optimised trail pedal at 360g per set. - Forged alloy body is shot-peened and anodised for increased durability. - Equipped with hollow taper chromoly steel axles for unmatched strength. - Sealed bearings and IGUS bushings. - 18 preassembled pins in virtual concavity for ultimate grip. - Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike. - Crank boots compatible axle. Manufacturer's Part Numbers: E02003A07100SPK Green E02003A0P000SPK Purple E02003A0PK00SPK Pink E02003A0BZ00SPK Gold Bronze E02003A0GM00SPK Grey Gun Metal E02003A02000SPK Black E02003A04000SPK Red E02003A03000SPK Blue E02003A06000SPK Orange