12pcs of 0.25mm stainless steel washsers for proper gap between brake pads and rotor
The Kappa Space T2.0 expands on the comfort and practicality of the Kappa Evo range by maximising the anatomical design and comfort. It features a wider central tunnel which eliminates pressure spikes and numbness. This increases overall blood flow where it's most needed. It has the same 147mm wide seating platform as the Kappa Evo but utilises every bit of space by using variable foam densities to increase comfort.The nose of the saddle is designed with a 45deg angle to the saddle to help maximise comfort when pushing in the most aerodynamic positions. The Prologo Space technology has a lot of benefits to it. It provides the maximum ergonomic design, by using a wider central tunnel than what is normally found in standard PAS saddles, which eliminates pressure spikes and numbness. The Space saddle width has an increased range from 141/143mm to 147mm making it much more comfortable when on the bike.The Kappa Space saddle also uses Prologo's ESD technology. Ergonomic Shape Design is where Prologo have identified a new ergonomic design for the centre of the saddle, which allows more space for your legs and an overall better cycling position. Further to this, the ESD reduces the friction of the quadriceps against the body of the saddle.The saddle also has Active Density Technology which combines 3 foam densities with a variable stiffness base. It's structured in different areas using 3 related foam densities.High Density - This is on the rear of the saddle and it gives a stable support of the ischial bones.Medium Density - This is in the middle of the saddle and it reduces the pressure on the pelvic area.Low Density - This is at the front of the saddle and it reduces pressure peaks in the body.The saddle uses the T2.0 rail, which is a Chromium-Molybdenum rail with an extremely high level of tensile strength. It has a 7mm rail clamp diameter. Key Features: Size: 273 x 147mm,Rail: Chromoly T2.0 7mm,Cover: Microfibre,Padding: Light PU,Weight: 258g.
Wolf Tooth Headset Spacers for Trek Knock Block are machined in the USA out of aircraft-grade aluminium. Available in a variety of colours to match the style of your bike.These spacers are to be used only with Trek Knock Block system. They are not compatible with other bikes.Trek developed Knock Block as an integrated frame protection system to prevent self-inflicted scuffs, dents, or cracks from spinning handlebars. Knock Block consists of a special stem and a stop chip on the frame. The stop chip limits the turning range of the custom keyed headset cover. The top of the headset cover has notches that lock into corresponding notches on the headset spacers, which also correspond with notches in the stem for a strong connection to the steer tube. These parts work together to prevent the crown of the fork and handlebar controls from hitting the frame when bars are turned too far in either direction. Key Features:Compatible only with Trek Knock Block,These spacers have unique raised features that key to Knock Block compatible stems (made by Bontrager),1 1/8" top (straight 1 1/8" or 1 1/8" to 1 1/2" taper) steerer tubes only.
Key Features:FSA Micro Spacer.,Facilitates fitting integrated headset.,Fits between the top cover and compression ring.,0.25mm height..
The Wolf Tooth Precision Headset Spacers Are Handcrafted In The USA From Premium-grade Anodised Aluminium. If You're Looking To Add Some Extra Vibrancy To Your Ride, Look No Further. This 5 Pack Comprises Of 5 Identical Spacers Of The Colour And Size Of Your Choice.Including Nifty Measurement Details On The Top Edges For Ease Of Set Up And Perfectly Paired With Wolf Tooth Precision Headsets, These Are A Must-have.Key Features:Handcrafted By Wolf Tooth In Minneapolis, USA,1 1/8" Top (Straight 1 1/8" Or 1 1/2" To 1 1/8" Taper) Steerer Tubes Only,6061-t6 Aluminium,Options: 3mm, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm,5 X Identical Spacers Of Size And Colour Of Your Choice,Weight: 3mm - 2g , 5mm - 3g, 10mm - 5g, 15mm - 7g, 20mm - 9g, 25mm - 11g, 30mm - 13g.
Chris King bottom brackets utilize Fit Kits to ensure that cranks mate perfectly with Chris King's precision bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change you cranks in the future.For DUB mountain cranks there are a few extra fitments notes to be aware of. If you have a 68mm BB shell you will need two 2.5mm Cup Spacers.For DUB Super Boost cranks you will need one additional spindle spacer kit.
The PRO VIBE EVO Spacer Set allows for the adjustment, in 5 or 10mm increments, of the stack height of the PRO VIBE EVO Handlebars.The set includes 5 and 10mm spacers, is compatible with either 1 1/8" or 1 1/4" steerer tubes, allowing you to fine tune the stack height of your integrated VIBE EVO cockpit. Thanks to the split design of the spacers, they can be set up without rerouting the cables, but they also feature routing channels should you wish to internally route your shifting cables and brake hoses.Features:Spacer set for PRO VIBE EVO Handlebars,5 and 10mm spacers,For 1 1/8" or 1 1/4" inch steerer tubes,Compatible with internal cable routing,Split design allows for easy fitting and external cable routing.
Look keo blade carbon ceramic bearing ti axle with keo cleat 16nm with 12nm spare.Blade carbon pedalOur elite-level, top-of-the-range weapon designed for pure racing performance. The unique, patented blade technology is combined with the unequaled properties of ceramic bearings and look’s signature power-to-weight ratio, ensuring the pedal comes straight in as a reference on the market.CeramicFaster - longerEvery component, every ball is meticulously selected to ensure the highest level of quality and performance. The balls are precisely calibrated one by one by a machine, down to the micrometer. They are then ordered according to size in perfectly-adapted rings, with the result that every bearing has a totally unique structure.Longer lifeA long lifespan is the main advantage of ceramic bearings. Rounder and harder than traditional balls, they are less sensitive to dust or deposits and guarantee consistent, durable performance. Furthermore, ceramic is not subject to corrosion. These physical properties ensure the bearings have a lifespan 4 to 6 times longer than standard steel bearings.SmootherReduced friction is the best-known and most characteristic advantage of ceramic bearings. The perfectly circular shape and the hardness of the balls combined with ceramic-specific, optimized greases allows for an 18% reduction of the frictional forces applied to the bearing.SpindleIn order to meet the requirements of the most demanding cyclists, the blade carbon pedals are designed to resist the very worst weather conditions. Particular care is given to each component within the axle to ensure optimal lifespan. The axle is guaranteed waterproof by ipx7 (full immersion) and ipx6 (rotating pedal exposed to water jets) tests. The design of the outer cap and the inside nut have been revised to meet these requirementsBlade technologyLighter – aerodynamic - saferThe use of a carbon blade instead of a conventional metal spring offers numerous advantages:The “blade – lever” system is 20% lighter than a standard “spring – lever” system.The carbon blade blends fluidly into the shape and volume of the pedal, improving the overall aerodynamic properties of the product.The blade technology revolutionizes the engagement/ disengagement experience whilst offering firm and secure support. The bowing of the blade when unclipping means the required disengagement torque is reached more rapidly in the dynamic of the movement, allowing for faster cleat release. Pedaling experience is also improved thanks to a firmer lateral stop.The carbon blade is available in various stiffness options: 12, 16 or 20. The blade can be easily, intuitively and quickly (a few seconds suffice) changed depending on the rider’s clip-in / clip-out preferences.Technology: blade,Retention: serial installed in 16 + additional 12 in box 20 sold separately,Body: carbon,Traction: carbon,Spindle: titanium,Bearings: ceramic,Platform area: 700 mm²,Platform width: 67mm,Q factor: 53mm,Stack height + cleats: 14,8 mm ( 8,5 + 6,3 mm ),Weight (pedal): 95g,Weight pair + cleats: 260g,.
The Wolf Tooth Ultralight Stem Cap With Integrated Spacer Is Sleek, Subtle And Aesthetically Refined. If You Value Every Single Detail Of Your Ride Then Elevate It To A Celestial Realm With This Beautiful Stem Cap.Machined By Wolf Tooth In Their Minneapolis Hq Using Premium-grade 6061-t6 Aluminium, This Is A Great Addition To Any Top-end Build.Many Carbon Steerers Require You To Run The Steerer Tube Above The Top Of The Stem, And You May Want To Keep Your Steerer Uncut For Different Riding Setups, Or Future Resale. This Stem Cap Offers A One-piece Solution And Looks Fantastic In A Raft Of Anodised Colours.
Bearing and spacer kit for use with Spanish type direct bearing fit BMX BB systems.Available to suit 19 or 22mm non-shoulder type axles.48.0mm central spacer for 68mm BB shell.Weights: 19mm - 149g / Weights: 22mm - 135g.Axle not included.