The E-Sommet 297 VR features a modern-geometry alloy frame equipped with RockShox Domain forks and Super Deluxe rear shock that offers a sublime balance of high-speed control and traction in all weather conditions. Vitus has fitted it with a Shimano STEPS E7000 electronic pedal-assisted motor drive that gives you an extra push on steep climbs while a Shimano Deore M5100 11-Speed groupset and powerful 4-piston hydraulic disc brakes give you a wide-gear range and dependable stopping power. This bike also features a mixed-wheel platform (29" front / 27.5" rear) to ensure you experience fast all-terrain performance. It rolls upon Tubeless Ready WTB ST Light i30 rims wrapped in high-grip Maxxis Assegai Wide Trail (WT) and High Roller II 3C MaxxTerra tyres. And it’s fitted with a Brand-X Ascend dropper seatpost and a stylish Nukeproof Horizon finishing kit. Full Suspension Alloy Frame Enduro Race E-Bike The Vitus E-Sommet VR Mountain Bike has all the trail-shredding performance and longer travel of a big-hitting 170mm Enduro bike, with a Shimano motor under the hood that kills the climbs and extends access to the most technical tracks. Experience the rush - the brief snapshots that flood your senses and place you deep in the zone. The feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last run. The rush that pushes you to explore your limits without overstepping the mark. Miss the last uplift? Doesn’t matter. The proven E7000 drive unit will soon have you back at the trailhead. 'Mullet' Mixed-Wheel Platform and Shimano STEPS Motor Drive Developed to run a mullet wheel setup, the E-Sommet VR features a 27.5” rear wheel that gives you more clearance for steep ground and is more responsive through tight corners, while a 29” wheel at the front eats up rocky terrain and keeps momentum high. You’re getting the versatility of both wheel sizes in one bike. The stability of the full aluminium frame with a seamlessly integrated battery is rock solid, so you won’t be taking just any line, this is a bike for taking the best line. This is a bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. The powerful STEPS system, with an E8035 504wh internal battery, keeps you fresh on the climbs so you can go all-in on the descents. Agile, Powerful and Versatile Full-Suspension E-Bike The E-Sommet VR is a bike that you sit within, not perch on top. It’s a powerful rider position that puts you firmly in control. Eagerly build your confidence on the refined berms and manicured features of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of naturally technical ground. Whether threading the needle through the challenging terrain of your favourite forest trails or dropping in on the lively descents of an e-Enduro, speed and traction come easily to the e-Sommet. It thrives in the chaos of steep and challenging trails. Bringing calm where all around there is frenzy. Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mph Key Features: E-Sommet Electric Enduro Platform: Internal battery frame design with new Shimano EP800 drive unit, improved suspension kinematics and updated geometry Frame Material: 6061-T6 Aluminium Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 167mm Rear Intended Use: Enduro RockShox Domain R and Super Deluxe Select R suspension Efficient Shimano STEPS E7000 motor with 504Wh battery Shimano Deore 1x11 speed drivetrain Powerful Shimano 4 piston hydraulic disc brakes or SRAM DB8 hydraulic disc WTB ST Light i30 Tubeless Ready rims with tape applied Confidence-inspiring Maxxis Assegai and High Roller II tyres Features: Frame: E-Sommet 6061-T6 Double Butted Alloy, Internal cable routing, post mount disc brake mounts, Boost hub spacing - 148mm x 12mm thru-axle, Shimano STEPS compatible. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: RockShox Super Deluxe Select R, DebonAir, 205mm x 65mm, trunnion Fork: RockShox Domain R 29", 170mm travel, DebonAir, 38mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset Headset: Acros AZX-589, ZS56/28.6 upper and ZS66/40 lower to suit 1-1/8" upper tapered to 1.8" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, 12mm Rise, L and XL: 800mm Wide, 25mm Rise Stem: Nukeproof Neutron AM, 6061 Alloy, 45mm length, 31.8mm Handlebar Clamp Diameter, 0° Rise Grips: Vitus Lock On Wheelset: WTB ST Light i30 rims on Vitus KT hubs, 29" Front, 27.5" Rear Wheelset, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: WTB ST Light i30 TCS 2.0, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: WTB ST Light i30 TCS 2.0, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Neutron, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Neutron, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.5" WT, 3C MaxxGrip compound, DD casing R/tyre: Maxxis High Roller II, 27.5" x 2.5" WT, 3C MaxxTerra compound, DD casing Chain: KMC e11S, 11 Speed, E-Bike specific, 118 Links Crankset: Shimano E8000 or E*Thirteen E*Spec Plus, 34T Narrow Wide Chainring, 165mm Crank Length, 53mm Chain Line F/brake Set: Shimano MT520, Lever: BL-MT501, Caliper: BR-MT520, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc R/brake Set: Shimano MT520, Lever: BL-MT501, Caliper: BR-MT520, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc Brake Rotors: Shimano RT66 or SRAM CenterLine - Shimano: 203mm Front & Rear, SRAM: 200mm Front & Rear, 6 Bolt Hub Fitment R/derailleur: Shimano Deore M5100, 11 Speed, Shadow Plus, Long Cage R/shifter: Shimano Deore M5100, 11 Speed, Rapidfire Plus Freewheel: Sunrace CSMS7, 11 Speed, 11-51T Range Saddle: Nukeproof Trail Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 34.9mm Diameter Battery: Shimano E8035, 504Wh, Downtube Integrated Cycle Computer: Shimano E7000, Boost, Trail, Eco, Off and Walk modes Assist Switch: Shimano E7000, Mounted on left Drive Unit: Shimano STEPS E7000, Max Power Output 250W, Max Torque 60Nm Weight: Medium: 24.3kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Sommet 297 CRX features a carbon/alloy frame adorned with 170mm-travel Kashima-coated Fox Float Factory suspension and a 12-Speed Shimano XT M8100 wide-range groupset. It rolls upon a mixed-wheel platform (29" front, 27.5" rear) that offers a sublime balance of rolling efficiency, stability and control for riding all-terrains. Vitus has also fitted it with 4-piston Shimano XT hydraulic disc brakes to control your momentum with dependable stopping power. And it rolls upon Tubeless Ready Nukeproof Horizon V2 wheels wrapped in high-grip Maxxis Assegai and Minion DHR II tyres. Full-Carbon Frame and Mixed-Wheel Platform Enduro Race Bike The big-hitting Vitus Sommet CRX 297 Mountain Bike is all about the rush. The rush of air, the rush of trees passing you in a blur, the rush of tyres through dirt, the rush of light, the rush of sounds - the brief snapshots that flood your senses and place you deep in the zone. And then there’s the rush that boils up inside you and the feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. Fox Factory Suspension and Shimano XT 12-Speed Groupset The Sommet 297 CRX has been developed to run a mullet wheel setup. A 27.5” rear wheel gives you more clearance over the back for steep ground and is responsive through tight corners, while a stable 29” wheel at the front eats up rocky terrain and keeps momentum high. You’re getting the versatility of both wheel sizes in one bike. Plus, it’s easier to pull manuals and wheelies. With volume added to the carbon front triangle, stability is rock solid without compromising agility. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. Agile, Powerful and Versatile Long-Travel Suspension Bike The Sommet is a bike that you sit within, not perch on top. Eagerly shred the refined berms and manicured features of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of naturally technical ground. Whether threading the needle through Enduro tape or dropping in on your favourite descent, speed comes easily to the Sommet CRX. It thrives in the chaos of turbulent trails. Bringing calm where all around there is frenzy. Key Features: Carbon Sommet Enduro Platform: Modern geometry with an adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro Big-hitting enduro bike with modern geometry Fox 38 and Float X2 Factory Series suspension Shimano XT 1x12 speed drivetrain Powerful Shimano XT 4 piston hydraulic disc brakes Nukeproof Horizon V2 Tubeless Ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and Minion DHR II tyres Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru-axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Fork: Fox 38 Float EVOL Factory Series 29", 170mm travel, Kashima coating, Grip2 damper, 38mm stanchions, 110mm x 15mm bolt through axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, L and XL: 800mm Wide Stem: Nukeproof Horizon, 6061 Alloy, 50mm length, 31.8mm Handlebar Clamp Diameter, 5° Rise Grips: Vitus Lock On Wheelset: Nukeproof Horizon V2 Wheelset, 29" Front, 27.5" Rear, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: Nukeproof Horizon V2, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxGrip compound, EXO+ casing R/tyre: Maxxis Minion DHR II, 27.5" x 2.4", 3C MaxxTerra compound, DD casing Chain: Shimano XT M8100, 12 Speed, 116 Links Crankset: Shimano XT M8100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper R/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper Rotors: Shimano RT76 or Brakco DR-02, 203mm Front and Rear, 6 Bolt Hub Fitment R/derailleur: Shimano XT M8100, 12 Speed, Shadow Plus, Long Cage R/shifter: Shimano XT M8100, 12 Speed, Rapidfire Plus Freewheel: Shimano XT M8100, 12 Speed, 10-51T Range Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 15.5kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Sommet 297 CRS features a carbon/alloy frame and rolls upon a 29" front and 27.5" rear wheel. This off-road race bike is optimised to provide exceptional control and agility while ensuring outstanding pedalling efficiency and climbing ability. Shimano SLX 12-Speed Groupset and RockShox Select Suspension Vitus has equipped it with 170mm-travel RockShox Zeb and Super Deluxe Select suspension - this combo soaks-up bumps and hits from the terrain and holds-on tight with unprecedented traction. A wide-ranging Shimano SLX 12-Speed groupset gives you gears for climbing steep technical climbs and powerful 4-piston hydraulic disc brakes control your momentum on the descent. It also rolls upon Tubeless Ready Nukeproof Neutron AM wheels wrapped in high-grip Maxxis Assegai and Minion DHR II tyres. The Vitus Sommet 297 CRS Mountain Bike delivers the rush. The rush of air, the rush of trees passing you in a blur, the rush of tyres through dirt, the rush of light, the rush of sounds - the brief snapshots that flood your senses and place you deep in the zone. And then there’s the rush that boils up inside you and the feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. Long-Travel Enduro Race Bike with Mixed-Wheel Platform The Sommet 297 CRS has been developed to run a mullet wheel setup. A 27.5” rear wheel gives you more clearance for steep ground and is more responsive through tight corners, while a 29” wheel at the front eats up rocky terrain and keeps momentum high. You’re getting the versatility of both wheel sizes in one bike. Plus, it’s easier to practise manuals and wheelies. With volume added to the carbon front triangle, stability is rock solid without compromising agility. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. The Sommet is a bike that you sit within, not perch on top. Eagerly build your confidence on the refined berms and manicured features of a trail centre, but pedal into the wild and that’s where this bike really comes alive. Whether threading the needle through Enduro tape or dropping in on your favourite descent, speed comes easily to the Sommet. It thrives in the chaos of steep and challenging trails. Bringing calm, and fun, where all around there is frenzy. Key Features: Carbon Sommet Enduro Platform: Modern geometry with an adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro Big-hitting enduro bike with modern geometry RockShox Zeb Select and Super Deluxe Select+ RT suspension Shimano SLX 1x12 speed drivetrain Powerful Shimano SLX 4 piston hydraulic disc brakes Nukeproof Neutron V2 Tubeless Ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and Minion DHR II tyres Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru-axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: RockShox Super Deluxe Select+ RT, DebonAir, 205mm x 65mm, trunnion Fork: RockShox Zeb Select 29", 170mm travel, Charger RC damper, DebonAir, 38mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, L and XL: 800mm Wide Stem: Nukeproof Neutron AM, 6061 Alloy, 45mm length, 31.8mm Handlebar Clamp Diameter, 0° Rise Grips: Vitus Lock On Wheelset: Nukeproof Neutron V2 Wheelset, 29" Front, 27.5" Rear, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: Nukeproof Neutron V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: Nukeproof Neutron V2, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Neutron V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Neutron V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxGrip compound, EXO+ casing R/tyre: Maxxis Minion DHR II, 27.5" x 2.4", 3C MaxxTerra compound, DD casing Chain: Shimano SLX M7100, 12 Speed, 116 Links Crankset: Shimano SLX M7100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano SLX, Lever: BL-M7100, Caliper: BR-M7120, Post Mount, Four Piston Caliper R/brake Set: Shimano SLX, Lever: BL-M7100, Caliper: BR-M7120, Post Mount, Four Piston Caliper Rotors: Shimano RT66, 203mm Front and Rear, 6 Bolt Hub Fitment R/derailleur: Shimano SLX M7100, 12 Speed, Shadow Plus, Long Cage R/shifter: Shimano SLX M7100, 12 Speed, Rapidfire Plus Freewheel: Shimano SLX M7100, 12 Speed, 10-51T Range Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 15.3kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Sommet 29 CR features 170mm-travel RockShox suspension and a Shimano Deore 12-Speed groupset. This groupset features a fast-shifting Deore M6100 Shadow Plus rear derailleur, a wide-ranging 10-51 Tooth cassette and powerful hydraulic disc brakes. And is also rolls fast and stable upon WTB KOM Trail i30 rims wrapped in Wide Trail (WT) Maxxis tyres. Versatile, Powerful and Agile Enduro Race Bike Whether new to the black runs or a seasoned full-face enduro thrill-seeker, the Vitus Sommet CR 29 Mountain Bike delivers the rush. The rush of air, the rush of trees passing you in a blur, the rush of tyres through dirt, the rush of light, the rush of sounds - the brief snapshots that flood your senses and place you confidently in the zone. And then there’s the rush that boils up inside you and the feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is why you do it. Composed and Confidence-Inspiring Full-Suspension Bike The Sommet is a bike that you sit within, not perch on top. It’s a powerful rider position and together you are a team. Eagerly shred the refined berms and manicured obstacles of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of natural features and steep, technical ground. With volume added to the carbon front triangle, stability is rock solid without compromising agility. This balanced ride and reliable Shimano components will inspire you to graduate onto trails that may otherwise have felt out of reach. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. Whether threading the needle through Enduro tape or dropping into your favourite descent, speed comes easily to the Sommet. It thrives in the chaos of steep and turbulent trails. Bringing calm where all around there is frenzy. Key Features: Big-hitting enduro bike with modern geometry RockShox Domain RC and Super Deluxe Select R suspension Shimano Deore 1x12 speed drivetrain Powerful Shimano 4 piston hydraulic disc brakes or SRAM DB8 hydraulic disc brakes WTB KOM Trail i30 tubeless-ready rims with tape applied Confidence-inspiring Maxxis Assegai and Minion DHR II tyres Carbon Sommet Enduro Platform Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: RockShox Super Deluxe Select R, DebonAir, 205mm x 62.5mm, trunnion Fork: RockShox Domain RC 29", 170mm travel, Motion Control damper, DebonAir, 38mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, L and XL: 800mm Wide Stem: Nukeproof Neutron AM, 6061 Alloy, 45mm length, 31.8mm Handlebar Clamp Diameter, 0° Rise Grips: Vitus Lock On Wheelset: WTB KOM Trail i30 rims on Vitus KT hubs, 29" Front and Rear Wheelset, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: WTB KOM Trail i30, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: WTB KOM Trail i30, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Vitus KT DHF112, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Vitus KT H5ER-SH, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxGrip compound, EXO+ casing R/tyre: Maxxis Minion DHR II, 29" x 2.4" WT, 3C MaxxTerra compound, DD casing Wheelset: WTB KOM Trail i30 rims on Vitus KT hubs, 29"" Front & Rear Wheelset, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready Chain: Shimano Deore M6100, 12 Speed, 116 Links Crankset: Shimano Deore M6100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano MT520, Lever: BL-MT501, Caliper: BR-MT520, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc R/brake Set: Shimano MT520, Lever: BL-MT501, Caliper: BR-MT520, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc Brake Rotors: Shimano RT66 or SRAM CenterLine - Shimano: 203mm Front & Rear, SRAM: 200mm Front & Rear, 6 Bolt Hub Fitment R/derailleur: Shimano Deore M6100, 12 Speed, Shadow Plus, Long Cage R/shifter: Shimano Deore M6100, 12 Speed, Rapidfire Plus Freewheel: Shimano Deore M6100, 12 Speed, 10-51T Range Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 15.8kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Sommet 297 CR features a carbon/alloy frame that rolls upon a 29" front wheel and a 27.5" rear that gives the ultimate balance of playfulness and stability for enduro racing and long-distance all-mountain adventures. Vitus has equipped it with long-travel RockShox Domain forks and Super Deluxe Select rear shock to smooth out the terrain while ensuring you experience outstanding traction in all conditions. It is equipped with a wide-range Shimano Deore 12-Speed groupset with hydraulic disc brakes and it rolls upon Tubeless Ready WTB KOM Trail i30 rims wrapped in high-grip Maxxis tyres. This bike is also armed with a Brand-X Ascend Dropper seatpost and a high-quality finishing kit from Nukeproof. Agile, Versatile and Stylish Enduro Mountain Bike Whether new to the black runs or a seasoned full-face enduro thrill-seeker, the Vitus Sommet CR 297 Mountain Bike delivers the rush. The rush of air, the rush of trees passing you in a blur, the rush of tyres through dirt, the rush of light, the rush of sounds - the brief snapshots that flood your senses and place you confidently in the zone. And then there’s the rush that boils up inside you and the feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is why you do it. RockShox Suspension and Shimano Deore 12-Speed Groupset The Sommet 297 CR has been developed to run a mullet wheel setup. A 27.5” rear wheel gives you more clearance over the back for steep ground and is responsive through tight corners, while a stable 29” wheel at the front eats up rocky terrain and keeps momentum high. You’re getting the versatility of both wheel sizes in one bike. With volume added to the carbon front triangle, stability is rock solid without compromising agility. This balanced ride and reliable Shimano components will inspire you to graduate onto trails that may otherwise have felt out of reach. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. Carbon/Alloy Long-Travel Enduro Race Bike The Sommet is a bike that you sit within, not perch on top. Eagerly build your confidence on the refined berms and manicured features of a trail centre, but pedal into the wild and that’s where this bike really comes alive. Whether threading the needle through Enduro tape or dropping in on your favourite trail, speed comes easily to the Sommet CR. It thrives in the chaos of challenging trails. Bringing calm, and fun, where all around there is frenzy. Key Features: Carbon Sommet Enduro Platform: Modern geometry with an adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro Big-hitting enduro bike with modern geometry RockShox Domain RC and Super Deluxe Select R suspension Shimano Deore 1x12 speed drivetrain Powerful Shimano 4 piston hydraulic disc brakes or SRAM DB8 hydraulic disc WTB KOM Trail i30 Tubeless Ready rims with tape applied Confidence-inspiring Maxxis Assegai and Minion DHR II tyres Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: RockShox Super Deluxe Select R, DebonAir, 205mm x 65mm, trunnion Fork: RockShox Domain RC 29", 170mm travel, Motion Control damper, DebonAir, 38mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, L and XL: 800mm Wide Stem: Nukeproof Neutron AM, 6061 Alloy, 45mm length, 31.8mm Handlebar Clamp Diameter, 0° Rise Grips: Vitus Lock On Wheelset: WTB KOM Trail i30 rims on Vitus KT hubs, 29" Front, 27.5" Rear Wheelset, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: WTB KOM Trail i30, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: WTB KOM Trail i30, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Vitus KT DHF112, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Vitus KT H5ER-SH, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxGrip compound, EXO+ casing R/tyre: Maxxis Minion DHR II, 27.5" x 2.4", 3C MaxxTerra compound, DD casing Chain: Shimano Deore M6100, 12 Speed, 116 Links Crankset: Shimano Deore M6100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano MT520, Lever: BL-MT501, Caliper: BR-MT520, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc R/brake Set: Shimano MT520, Lever: BL-MT501, Caliper: BR-MT520, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc Brake Rotors: Shimano RT66 or SRAM CenterLine - Shimano: 203mm Front & Rear, SRAM: 200mm Front & Rear, 6 Bolt Hub Fitment R/derailleur: Shimano Deore M6100, 12 Speed, Shadow Plus, Long Cage R/shifter: Shimano Deore M6100, 12 Speed, Rapidfire Plus Freewheel: Shimano Deore M6100, 12 Speed, 10-51T Range Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Genuine Vitus Spare Parts.
Genuine Vitus spare parts.
Genuine Vitus Spare Parts.
Genuine Vitus spare parts.
Genuine Vitus frame spares.
Genuine Vitus spare parts.
Genuine Vitus frame spares.