Such a great little piece of kit to use on those cold mornings in Spring and Autumn. Modern cycling shoes have amazing levels of breathability when it’s a bit nippy outside they can often be too breathable! Slip on a pair of toe covers and the bite of the wind will be kept out but you won’t overheat as if you were wearing full-on overshoes. As soon as the sun rises a little and the world warms up they are so small they will easily stash away in your jersey pocket.PU coated waterproof fabric has a high degree of stretch for easy fitting and the sole is pre-cut for compatibility with all major road cleats. Super-compact toe covers - will fit easily into a jersey pocket Stretch waterproof PU fabric Reflective print on front Elasticated cuff Cleat compatible sole Construction Nylon 67% PU 23% Elastane 10%
Molding to the shoe these lightweight stretch waterpoof overshoes provide ideal spring and autumn protection for your best road shoes with a 'barely there' feel. Compact lightweight multi-season construction High stretch waterproof PU upper Open sole design with durable toe panel and instep crank rub protection Deep elastic cuff with silicone gripper Offset rear zipper access with snap down puller Reflective print twin stripes on the rear Construction Nylon 67% PU 23% Elastane 10%
The new gravity-focused grip series GFR1 Factory has been developed and tailored according to the expectations and wishes of Tahnée Seagrave (UK) and her colleague team riders of the Canyon FMD Racing. The Ergon development team always works very closely with athletes and teams, which enables them to design products for the highest demands within their target group and to be used at the very limit. The grip has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower grip zone (finger) is strongly pronounced to keep gripping forces at a minimum when lifting the front wheel. The slim inner stop further assists in finding the right-hand position while still providing free shifter access. The high-strength alloy clamps on the inside keeps the grip from twisting even on carbon bars. The Factory version provides incredible grip and rebound properties. The grip feeling is soft but still super defined and precise.
After the successful launch of the GD1 Factory in 2017 and multiple podiums, Ergon have launched the updated GD1 Evo using GravityControl Rubber. It features excellent damping properties, CNC clamps for a secure fit and interchangeable bar end plugs.Thumb Zone Ultra soft damping texture for the thumb areaFingertip Zone Maximum grip for the fingertipsLower Palm Zone (Top) Precise damping properties in the lower palm zone2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Carbon friendly CNC Aluminium clampsInterchangeable end plugs140g per pair (Standard)125g per pair (Slim)Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
The GE1 Evo Factory Grips benefit from feedback from pro riders of the Enduro World Series. With a super-soft compound and anti-slip finish, they provide lasting comfort and outstanding grip no matter how hard you're pushing.2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Integrated end plugsCarbon friendly CNC Aluminium clampsMaterial: Gravity Control RubberThe aim of the GE1 update was to further increase the grip on the handlebars while further reducing required strength input. The results are more comfort, better control of your bike and an optimised arm position.The texture alignment is slightly adjusted against the hand rotation, intersecting channels in the gripping zone and differently shaped elements increase the grip of the GE1 Evo Factory. The texture update is completed all the way to the edge of the grip itself, affording more room for comfort. The ulnar nerve on the outside of the hand is effectively relieved and numbness is prevented.Ergon really has obsessed over every detail with these grips. In addition to the advanced compound and shape, there s a patent-pending inner construction. This features a forged inner clamp and the inner core is connected to an integrated grip end. The reason Ergon adopted this design, was to increase the surface area for the hand right to the grip s end, thus preventing pressure on the hand's outer nerves. This design also helps to dampen vibrations of sudden shocks and trail feedback.
After the successful launch of the GD1 Factory in 2017 and multiple podiums, Ergon have launched the updated GD1 Evo using GravityControl Rubber. It features excellent damping properties, CNC clamps for a secure fit and interchangeable bar end plugs.Thumb Zone Ultra soft damping texture for the thumb areaFingertip Zone Maximum grip for the fingertipsLower Palm Zone (Top) Precise damping properties in the lower palm zone2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Carbon friendly CNC Aluminium clampsInterchangeable end plugs140g per pair (Standard)125g per pair (Slim)Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
The GE1 Evo Factory Grips benefit from feedback from pro riders of the Enduro World Series. With a super-soft compound and anti-slip finish, they provide lasting comfort and outstanding grip no matter how hard you're pushing.2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Integrated end plugsCarbon friendly CNC Aluminium clampsMaterial: Gravity Control RubberThe aim of the GE1 update was to further increase the grip on the handlebars while further reducing required strength input. The results are more comfort, better control of your bike and an optimised arm position.The texture alignment is slightly adjusted against the hand rotation, intersecting channels in the gripping zone and differently shaped elements increase the grip of the GE1 Evo Factory. The texture update is completed all the way to the edge of the grip itself, affording more room for comfort. The ulnar nerve on the outside of the hand is effectively relieved and numbness is prevented.Ergon really has obsessed over every detail with these grips. In addition to the advanced compound and shape, there s a patent-pending inner construction. This features a forged inner clamp and the inner core is connected to an integrated grip end. The reason Ergon adopted this design, was to increase the surface area for the hand right to the grip s end, thus preventing pressure on the hand's outer nerves. This design also helps to dampen vibrations of sudden shocks and trail feedback.
The SM Enduro Comp from Ergon was developed in conjunction with Fab Barel, Richie Rude, Cody Kelly, Joe Barnes, Remy Metailler to name but a few. The narrow and short V-Shape seating surface ensures optimum freedom of movement and easy position shifting. The saddle enhances steering input and control to the bike through the inside of your thighs; hence the contact zones being padded all-around.Shell: Nylon Composite Rails: CroMo Cover: Microfibre Side Flanks: YesEdge Protection: YesPadding: Orthopaedic AirCell FoamWeight: 245g (S/M), 250g (M/L)
Ergon GE1 Evo Factory GripsThe GE1 Evo Factory Grips build on the success of Ergon's GE1 model by offering an even softer compound for enhanced comfort and an anti-slip finish for extra grip. Designed using feedback from top Enduro World Series riders, these grips actively support a correct torso/forearm position when riding downhill. By rotating the grip area towards the steering axle by 8%, these grips ensure the elbows are raised outwardly for better control.Comfort That LastsIn addition to the comfort provided by the soft compound, the GE1 Evo's feature Ergon's patent-pending inner construction. This consists of a forged inner clamp with a fully integrated grip end that's connected to the inner core. This design provides a soft, vibration damping grip edge enabling your hand to grip right to the grip's edge, which removes pressure from the hand's sensitive outer ulnar nerve.Features: Material: GravityControl Rubber Clamps: Cold Forged Aluminium, CNC Machined, black anodised, carbon-friendly Replaceable bar end plugs Use: MTB, Enduro, Gravity, All-Mountain Size: Standard Option: For glove size Large/X-Large (8.5-10.5); Slim Option: For glove sizes Small/Medium (6.5-8.5) Weight: Standard: 105g (pair); Slim: 90g (pair)Buy Ergon Components from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
Ergon GE1 Evo Factory GripsThe GE1 Evo Factory Grips build on the success of Ergon's GE1 model by offering an even softer compound for enhanced comfort and an anti-slip finish for extra grip. Designed using feedback from top Enduro World Series riders, these grips actively support a correct torso/forearm position when riding downhill. By rotating the grip area towards the steering axle by 8%, these grips ensure the elbows are raised outwardly for better control.Comfort That LastsIn addition to the comfort provided by the soft compound, the GE1 Evo's feature Ergon's patent-pending inner construction. This consists of a forged inner clamp with a fully integrated grip end that's connected to the inner core. This design provides a soft, vibration damping grip edge enabling your hand to grip right to the grip's edge, which removes pressure from the hand's sensitive outer ulnar nerve.Features: Material: GravityControl Rubber Clamps: Cold Forged Aluminium, CNC Machined, black anodised, carbon-friendly Replaceable bar end plugs Use: MTB, Enduro, Gravity, All-Mountain Size: Standard Option: For glove size Large/X-Large (8.5-10.5); Slim Option: For glove sizes Small/Medium (6.5-8.5) Weight: Standard: 105g (pair); Slim: 90g (pair)Buy Ergon Components from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
Ergon GE1 Evo Factory GripsThe GE1 Evo Factory Grips build on the success of Ergon's GE1 model by offering an even softer compound for enhanced comfort and an anti-slip finish for extra grip. Designed using feedback from top Enduro World Series riders, these grips actively support a correct torso/forearm position when riding downhill. By rotating the grip area towards the steering axle by 8%, these grips ensure the elbows are raised outwardly for better control.Comfort That LastsIn addition to the comfort provided by the soft compound, the GE1 Evo's feature Ergon's patent-pending inner construction. This consists of a forged inner clamp with a fully integrated grip end that's connected to the inner core. This design provides a soft, vibration damping grip edge enabling your hand to grip right to the grip's edge, which removes pressure from the hand's sensitive outer ulnar nerve.Features: Material: GravityControl Rubber Clamps: Cold Forged Aluminium, CNC Machined, black anodised, carbon-friendly Replaceable bar end plugs Use: MTB, Enduro, Gravity, All-Mountain Size: Standard Option: For glove size Large/X-Large (8.5-10.5); Slim Option: For glove sizes Small/Medium (6.5-8.5) Weight: Standard: 105g (pair); Slim: 90g (pair)Buy Ergon Components from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
Ergon SMD2 Comp Bike SaddleDesigned, tailored and perfected by Ergon as a result of an intensive development period with the help of some of the world's best downhill racers, the SMD2 Comp model provides the ultimate saddle feel. It's advantageous for riders who seek additional control when riding on the most challenging terrain at speed, making it perfect for racing.Ergonomically ShapedThe entire saddle and its profiled design follows an ergonomically shaped, tilted saddle orientation that offers the rider complete freedom of movement over and around the bike. Being able to control the bike with the inner leg is very important when riding at speeds over rough terrain and the padding around this saddles key contact areas is the marvel of its design.Clearance at the RearClearance at the rear of the saddle allows for undisrupted tyre clearance and suspension travel. This clearance is also a convenience to the rider when negotiating steep technical descents as it will not restrict movement when adjusting your centre of gravity over and around the rear wheel.Additional Stiffness and GripThe carbon composite shell and the anti-slip seating surface add additional stiffness and grip to the saddle making it ideal for riders who demand the most from their components. The added level of grip and stiffness boosts control, performance and rider confidence when riding through the roughest of terrain.Features: Cover Material: Microfibre, Anti-slip (outer), Carbon composite (shell) Padding: 360° Edge paddingRails' Material: Chromoly (CrMo), 7x7mmUse: Downhill (DH), Freeride (FR)Made for DownhillDeveloped with world-class professionalsDurable and slip-resistantExtra-flat, short rear without edges for better rear tyre clearanceWeight: 215gTechnologies: Downhill Saddle Positioning: The saddle is set very low and with the nose slightly upwards for the downhill riding position. This allows for more freedom of movement and control in technical terrain; especially noticeable when hitting jumps The SMD2 is not suitable for level saddle settingsOne Size Fits All: The saddle is rarely used for sitting in downhill. This saddle however serves in the handling of the bike for seated pedalling, as well as in the air. The SMD2 was developed precisely to meet these needs, which directly results in no need for different saddle widthsBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.