The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
Featuring a completely updated design both inside and out, this race-ready enduro suspension fork is engineered for smooth and dependable performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. FIT4 Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. - Increased crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately). Manufacturer's Part Numbers: 910-20-243 Black 27.5" QR110 160mm 44mm 910-20-238 Black 29" QR110 150mm 51mm 910-20-237 Black 29" QR110 150mm 44mm
Fox Suspension 36 Float Factory Fit4 ForkThis race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 1965gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately).Manufacturer's Part Numbers: 910-20-243 Black 27.5" QR110 160mm 44mm 910-20-238 Black 29" QR110 150mm 51mm 910-20-237 Black 29" QR110 150mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Neatly organised in our world-famous Blue Box Tool Case and built for portability this EK-3 Professional Travel and Event Kit is packed with 56 of our finest tools, allowing hundreds of repair and maintenance tasks to be carried out. Kit Includes ATD-1.2 Adjustable Torque Driver AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20 Notch Shimano® and ISIS® Drive BO-2 Bottle Opener CC-4 Chain Checker CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CP-1.2 Cassette Pliers CT-3.3 Chain Tool CWP-7 Compact Universal Crank Puller DCW-1 Double-Ended Cone Wrench: 13/14mm (2) DCW-2 Double-Ended Cone Wrench: 15/16mm (2) DCW-3 Double-Ended Cone Wrench: 17/18mm DSD-2 Derailleur Screwdriver: Cross Tip DSD-4 Derailleur Screwdriver: Flat Blade DT-2 Rotor Truing Fork FR-5.2H Cassette Lockring Tool with Handle GSC-1 GearClean™ Brush HCW-15 36mm/32mm Headset Wrench HMR-8 8oz Shop Hammer HT-8 8mm Hex Tool HXS-1.2 Hex Wrench Set LP-7 Utility Pliers MLP-1.2 Master Link Pliers MW-8 Metric Wrench: 8mm MW-9 Metric Wrench: 9mm MW-10 Metric Wrench: 10mm PAW-12 12" Adjustable Wrench PW-4 Professional Pedal Wrench RR-12 Tape Measure SW-0 Precision Spoke Wrench: .127" SW-2 Precision Spoke Wrench: .136" SZR-1 Shop Scissors TL-6.2 Steel Core Tire Levers TWS-1 Torx® Compatible Wrench Set UP-SET Utility Pick Set VC-1 Valve Core Tool ZP-5 Flush Cut Pliers
Park Tool Professional Travel and Event Kit EK-3 Built for portability and neatly organised in our world-famous Blue Box Tool Case, the Park Tool EK-3 Professional Travel and Event Kit is jam packed with 56 of the finest tools. This makes it the ideal kit for team, event or even the home mechanic. Features:A wide variety of essential tools suitable for a wide variety of modern bikesHigh-quality materialsCan be used for general maintenance, cleaning, repairs and fine-tuningBomb-proof Blue BoxTidy and organised storage with additional pockets, pouches, straps and open space allowing additional tools and parts to be added Contains 56 of Park Tool's most commonly used items: ATD-1.2 Adjustable Torque DriverAWS-1 Three-Way Hex Wrench Set: 4, 5, 6mmBBT-9 Bottom Bracket Tool for 16-Notch External Bearing CupsBBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS DriveBO-2 Bottle OpenerCC-4 Chain CheckerCN-10 Professional Cable and Housing CutterCNW-2 Chainring Nut WrenchCP-1.2 Cassette PliersCT-3.3 Chain ToolCWP-7 Compact Universal Crank PullerDCW-1 Double-Ended Cone Wrench: 13/14mm (2) DCW-2 Double-Ended Cone Wrench: 15/16mm (2) DCW-3 Double-Ended Cone Wrench: 17/18mmDSD-2 Derailleur Screwdriver: Cross TipDSD-4 Derailleur Screwdriver: Flat BladeDT-2 Rotor Truing ForkFR-5.2H Cassette Lockring Tool with HandleGSC-1 GearClean BrushHCW-15 36mm/32mm Headset WrenchHMR-8 8oz Shop HammerHT-8 8mm Hex ToolHXS-1.2 Hex Wrench SetLP-7 Utility PliersMLP-1.2 Master Link PliersMW-8 Metric Wrench: 8mmMW-9 Metric Wrench: 9mmMW-10 Metric Wrench: 10mmPAW-12 12" Adjustable WrenchPW-4 Professional Pedal WrenchRR-12 Tape MeasureSW-0 Precision Spoke Wrench: .127"SW-2 Precision Spoke Wrench: .136"SZR-1 Shop ScissorsTL-6.2 Steel Core Tire LeversTWS-1 Torx Compatible Wrench SetUP-SET Utility Pick SetVC-1 Valve Core ToolZP-5 Flush Cut Pliers Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
This race-ready mountain bike (MTB) fork is equipped with 35mm stanchions along with MRP's finest technologies to give all mountain and enduro racers exceptional front end suspension performance on the most rigorous of terrain conditions. Coming kitted out with Boost axle spacing, this model provides a stronger and stiffer construction, as well as more effective and precise handling as you tackle rock gardens, tree roots and debris. MRP Ribbon coil forks have also received updates including the ChocoLUXE internals and Norglide Bushings, which deliver less stiction and better-than-ever performance. Enduro MTB Fork with Coil Spring The Ribbon Coil gives you the spring tunability and stroke control previously found only with air, while giving you the supple linear spring curve, lower friction, longer service life and consistent feel that you get with a coil spring. Coil aficionados have dreamt of a fork that combines these advantages with the latest in chassis and damper technology. MRP has delivered with the Ribbon Coil. Also including tried and tested features like the PSST pressure relief valves, bladder-free EssenTTial damper utilising a low-pressure IFP, Outcast arch design and the acclaimed Ramp Control technology, this is the hard-hitting enduro fork to have. Technologies: ChocoLUXE Internals: - ChocoLUXE is a proprietary material utilised in the damper plug, damper seal, damper IFP, and damper support. It’s highly dimensionally stable, meaning that parts made from it are more consistent overall and less susceptible to change with exposure to temperature swings or humidity. It is also extremely low friction. Norglide Bushings: - Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. They’re exceptionally smooth and durable. Reduced Friction: In addition to part updates, MRP also continued to refine its processes. In whole, these part and process changes have resulted in a 37% reduction in friction compared to first-generation Ribbon forks. Travel-adjustable coil spring system with preload adjustment and Ramp Control™ technology. New EssenTTial™ twin-tube, bladder-free damper utilising a low-pressure IFP. Outcast™ arch design with forward-facing weight reliefs to mitigate mud build-up. PSST™ pressure-relief valves that quickly and easily bleed off excess pressure in the lowers caused by elevation and temperature changes. "Boost" spacing and 35mm stanchions. Manufacturer's Part Numbers: FKMRR7209 Black 29"/27.5"+ 160mm 46mm FKMRR7208 Black 29"/27.5"+ 150mm 46mm FKMRR7213 Black 27.5" 150mm 39mm FKMRR7214 Black 27.5" 160mm 39mm