With a 130mm fork combined with 125mm of rear suspension, the Reactor ST combines the best of an enduro bike (long, low and slack) with the best of an XC Race bike (lightweight spec and efficient suspension) to create a sprightly yet seriously capable machine. Frame Construction: To optimise the weight, strength and stiffness, the Reactor 290 ST Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). Adjustable Geometry: The Reactor ST features a 66.8° (66.3° Low) Headangle atop a 76.3° (75.8° Low) seat angle across a 460mm reach on a Medium frame. We also offer the frame in Large and X-Large sizes. The Reactor ST frames feature the same “flip chip” design as the regular Reactor frame to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor ST into a more aggressive machine, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, we designed the four-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor ST some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor ST is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 290 Carbon, 125mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Fox 34 Float, Factory Series, Kashima, Grip 2 Damper, 130mm, 44mm Offset, BOOST, Black • Shock: Fox Float DPS, Factory Series, Kashima, 3 Position, EVOL LV, Custom LCL, LRL, CMF tune, 210x47.5mm, Bearing End 1x 0.2 Spacer fitted. • Front Wheel: Reynolds TR309 XC Front 28h, 29", Center-Lock, 110x15mm • Rear Wheel: Reynolds TR289 XC Rear 28h, 29", Center-Lock, Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Minion DHF 29”x2.3 3C MaxxTerra/EXO/TR, Rear: Maxxis Agressor 29”x2.3 MaxxTerra/EXO/TR • Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline • Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus • Chain: Shimano XT M8100 HG 12-speed Inc Quicklink • Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano XT M8100, 2 Pot Brake, Metallic Pads • Front Rotor: Shimano RT-MT800, 180mm • Rear Rotor: Shimano RT-MT800, 180mm • Handlebars: Nukeproof Horizon Carbon V2 25mm Rise, Width - M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Bikeyoke Divine Stealth w Shimano SL-MT500-IL Remote lever, M:160mm drop; L/XL:185mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: TBD Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 130mm Axle to Crown: 537mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x47.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The Wolf Tooth ReMote Clamp Conversion Kit allows you to attach a Wolf Tooth ReMote Dropper Lever to a specific handlebar diameter or brake lever. This option is specifically designed for use with SRAM Matchmaker X. Genuine Wolf Tooth spare parts. Manufacturer's Part Number: WTMMCONVKIT Black One Size
Adding to the life of rubber seals, as well as protecting against moisture and dirt build-up, this Suspension Lube Spray will instantly improve suspension performance. Suitable for forks, shock units and dropper posts. May even be used to stop dirt from sticking in heavy soiled areas on race day.
This genuine Fox Suspension volume spacer is perfect for making adjustments to your fork's air volume and making your suspension more progressive.
When you need the best all-around road tyre, there’s only one choice: the Hutchinson Fusion 5 Performance. Hutchinson measures its tyres on ride comfort, rolling resistance, grip, wear life, toughness, and weight, and the Performance is off the charts in every category. You get the same fast, grippy Eleven Storm compound as all Fusion 5 series tyres, paired with a more robust Kevlar Pro Tech flat protection layer. With unparalleled, uncompromising ride in our broadest size range, it’s a tyre for every road. The Hutchinson Fusion 5 Performance 11storm is a lightweight, performance-focused road racing tyre that's been designed to excel at competitive racing. It features Hutchinson's ElevenSTORM compound, which lowers rolling resistance across the board for a remarkable uphill speed advantage as well as a grippy all-around performance. The Performance version of the Fusion 5 family is the perfect harmony for all cyclists wishing to go fast and far. Associated with a Kevlar® reinforcement under the tread, it will reassure the most nervous and offer durability superior to 4,000 km. It offers the perfect compromise between performance and comfort, grip and durability.
Weighing just 426g this is one of the lightest and smallest headlamps of this calibre on the market. Power Modes Instead of the switching between different kinds of light modes the R4+ lets you easily set the level of battery you’d like to use with 6 different power options. The light comes with an illuminated power switch making choosing between the right modes even easier. Mounting The light comes with easy to install mounts including a quick bayonet fitting handlebar mount plus a helmet mount and a head harness.
Neatly organised in our world-famous Blue Box Tool Case and built for portability this EK-3 Professional Travel and Event Kit is packed with 56 of our finest tools, allowing hundreds of repair and maintenance tasks to be carried out. Kit Includes ATD-1.2 Adjustable Torque Driver AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20 Notch Shimano® and ISIS® Drive BO-2 Bottle Opener CC-4 Chain Checker CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CP-1.2 Cassette Pliers CT-3.3 Chain Tool CWP-7 Compact Universal Crank Puller DCW-1 Double-Ended Cone Wrench: 13/14mm (2) DCW-2 Double-Ended Cone Wrench: 15/16mm (2) DCW-3 Double-Ended Cone Wrench: 17/18mm DSD-2 Derailleur Screwdriver: Cross Tip DSD-4 Derailleur Screwdriver: Flat Blade DT-2 Rotor Truing Fork FR-5.2H Cassette Lockring Tool with Handle GSC-1 GearClean™ Brush HCW-15 36mm/32mm Headset Wrench HMR-8 8oz Shop Hammer HT-8 8mm Hex Tool HXS-1.2 Hex Wrench Set LP-7 Utility Pliers MLP-1.2 Master Link Pliers MW-8 Metric Wrench: 8mm MW-9 Metric Wrench: 9mm MW-10 Metric Wrench: 10mm PAW-12 12" Adjustable Wrench PW-4 Professional Pedal Wrench RR-12 Tape Measure SW-0 Precision Spoke Wrench: .127" SW-2 Precision Spoke Wrench: .136" SZR-1 Shop Scissors TL-6.2 Steel Core Tire Levers TWS-1 Torx® Compatible Wrench Set UP-SET Utility Pick Set VC-1 Valve Core Tool ZP-5 Flush Cut Pliers
This race-proven model delivers superior performance in all suspension systems and its high viscosity index provides consistent damping through the longest and most extreme riding conditions. Its semi-synthetic mineral oil formulation has become the choice of professionals worldwide as it will not thicken or thin due to changes in temperature. Additionally, its low foam technology delivers consistent and predictable damping in all riding conditions.
E-Bike Snow Foam has been developed by Tru-Tension for quick and easy cleaning, leaving a polished shimmering shine. Perfect for cleaning in a garage or shed without the need to rinse with water. Ideal for all E-Bikes, Road and MTB. Simply spray on Snow Foam and watch it instantly lift dirt from the surface. Wipe away without the need for water before buffing the surface clean. The perfect E-Bike cleaner. Our all-in-one instant action foam cleaner soaks into the dirt, lifting it away from the surface for an easy clean without the need for water. Once dry it leaves a polish which is buffed in to leave a high gloss finish. Perfect for cleaning indoors and without the need for water. Ideal for removing light dirt from frames and wheels. Safe to use on plastic and painted surfaces. Spray. Soak. Wipe. Buff. How to use your E-Bike Snow Foam Cleaner: Step 1: Spray onto frame, wheels or any painted, metal or plastic surfaces. Step 2: Leave for 5 – 30 seconds. The foam will go to work lifting the dirt and grime. Step 3: Wipe dirt away with a clean cloth. Step 4: Once dirt is removed, use a separate clean cloth (microfibre suggested) to buff the surface in circles to activate the polish, leaving a gleaming finish. Important: Do not use on braking components.
The Wheel Truing Stand TS-2.3deal for wheel truing up to 29""+ in size, with or without a tyre fitted, this top-quality workstand is a superb addition to any workshop setup. Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench — still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder coated heavy-gauge steel and is manufactured, assembled and calibrated in St. Paul, Minnesota. Strong, comfortable knobs, spring-loaded calipers, and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use.
Superior Anti-Fog Spray by Tru-Tension provides a long-lasting barrier against fog and mist while absorbing moisture. Spray on the inside of goggles, visors or glasses for anti-mist protection. It can also be used on the outside to help rain bead away. It’s safe to use on most glass and plastic surfaces. It can last up to 5 days but for best results apply every few days. How to use: Simply spray on and wipe away.
For ultimate protection from temperature changes, the Compressport Trail Under Control Shorts feature thermoregulated design, keeping the muscles warm with a ventilation band to keep things offer comfortable and breathable compression. With their second skin sensation fit, the Trail Under Control Shorts target compression on the thighs, activating blood circulation which in turn improves muscular circulation for longer, improved performance. For ultimate comfort. Compressport has created the Trail Under Control Shorts with ultra-thin fibres that ergonomically adapt to the skin with silicone grips on the thighs to ensure the shorts stay in place and flat seams throughout to cause prevent irritation. Care Instructions Hand wash. Do not bleach. Do not tumble dry. Do not iron. Do not dry clean.