This versatile mountain bike (MTB) fork features a hard-wearing straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way. Expert Air Spring This trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Variable Terrain Tune - 3-Position Compression Adjust When developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain. Chassis When developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch. Item Top Features Continued: Max Tyre Size: 68mm 77mm (27.5"+), 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mm
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory FIT4 Boost Fork (2023)Just when you thought the 36 Float Factory FIT4 mountain bike (MTB) fork couldn't be improved any further, Fox Suspension has updated it to be stiffer, stronger and lighter than before. This smooth performing enduro-ready model also boasts the renowned Kashima coating and offers a wide range of adjustments.This race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has also equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer: 1.1/8" to 1.5" Tapered Offset: 44mm Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory FIT4 Boost Fork (2023)Just when you thought the 36 Float Factory FIT4 mountain bike (MTB) fork couldn't be improved any further, Fox Suspension has updated it to be stiffer, stronger and lighter than before. This smooth performing enduro-ready model also boasts the renowned Kashima coating and offers a wide range of adjustments.This race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has also equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer: 1.1/8" to 1.5" Tapered Offset: 44mm Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This model of the legendary Fox 36 receives an update in the form of a revised crown design that's engineered with more steerer tube overlap. This improves its durability and maintains stiffness while dropping 20 grams. Updated Crown Lighter by 20 grams, while increasing steerer-tube overlap at the CSU, the updated crown design improves durability while our engineering maintains stiffness and drops weight. Kabolt X Axle Kabolt X is a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, it features a single-sided pinch bolt design. Lower Leg Bypass Channels Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Bleeders Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness. Lower Leg Arch Our new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity-style riding. Grip2 Damper Unparalleled ride quality and ultra-precise adjustability. Allows for external fine-tuning of suspension performance thanks to our patented Variable Valve Control (VVC) technology. Float EVOL Air Spring Optimises small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and a more tunable bottom-out progression. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.
DVO Suspension Diamond D1 Boost Fork 27.5" 44mm OffsetMade with quality, hard-wearing materials and top-level suspension technology, this enduro-centric fork by DVO is boldly built for exhilarating downhill adventures. Constructed from aluminium, with magnesium-cast lowers, it provides every ride with 180mm of terrain-taming travel, as well as an array of adjustments to keep you upright and unrivalled from top to bottom. Boost-Sized, Aluminium-Built MTB ForkUsing a combination of six low-speed compression adjustments and 24 high-speed clicks, fine-tuning every ride to your preferred smoothness is made easy, as an OTT (Off The Top) adjustment system on the negative air spring improves control and sensitivity over smaller bumps. Equipped with a closed cartridge bladder damper and a Boost-sized thru axle, the Diamond D1 gives you enhanced rigidity and responsiveness over the most challenging runs, making it the ultimate trail-blazing fork for the downhill dynamo. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 180mm Axle: 15x110mm Boost thru axle (bolted) Offset: 44mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ready for downhill domination, this excellent Diamond D1 version features an aluminium main build and magnesium-cast lowers, giving a reliable and robust performance on every adventure. Giving you six clicks of low-speed compression adjustment and 24 high-speed changes, fine-tuning the fork for your impending route is made easy, while Off The Top (OTT) adjustment to the negative spring improves the small bump sensitivity and stroke feel. Shim stack-controlled damping and a closed cartridge bladder system allow you to customise how rowdy you like your run to be through the use of different configurations, making this stiff and supportive fork an impressive choice for the venturesome rider.
Engineered for extreme accuracy on your training sessions, these power meter pedals feature a power sensor on both the left and right pedals. Designed with breakthrough technology, this version's power meter uses IAV Cycling Dynamics and is mounted directly on both pedals for real balance data and not estimates. By using the integrated gyroscope, this model also provides advanced pedal metrics for an incredibly detailed analysis of your pedalling for each leg. Coming complete with both Bluetooth and ANT+ connectivity, as well as up to 50 hours battery life, this is a great choice of upgrade for riders who want to improve their performance. IAV Power System Many power meters calculate power using the Average Angular Velocity (AVG) per rotation, instead of the instantaneous Angular Velocity (REAL) value: this may introduce an additional error, up to 4.5% compared to the declared accuracy. Assioma, thanks to its exclusive IAV Power system and an integrated gyroscope, measures the actual instantaneous angular velocity to guarantee the same ±1% degree of accuracy with any style of pedalling, even with oval chainrings. Automatic Temperature Compensation Rain, snow, mud, or sweltering heat: Automatic Temperature Compensation (ATC) ensures exact, consistent watt measurements in any weather condition at temperatures between -10°C and 60°C. Waterproof, Resistant and the Lightest Ever Made The lightest and most compact pedal-based power meter made by Favero: with no protruding elements, it does not interfere with the pedalling. Not even when cornering. Protected by a bi-component resin block, the power meter sensor is extremely resistant to shocks and fully waterproof. Item Top Features Continued: Accuracy Power Measurement: ± 1% Temperature Compensation: -10°C / +60°C Water Resistance Degree: IP67 Q-Factor: 54mm Compatible Cleats: Original LOOK Kéo and Favero cleats (red and black) Bike Type: Racing, Road Made in Italy Warranty: 2 years Total Weight Per Pedal: 151.5g (battery included) In The Box: • Left pedal with power sensor • Right pedal with power sensor • Battery charger including plugs (EU, US, UK, AU) • 2 two-meter long micro-USB/USB cables with 2 magnetic connectors • 2 red cleats float 6° (LOOK Kéo compatible) • Hex key and 4 washers for the installation • User manual Technologies: Easy to Install: Install and transfer your Assioma from one bike to another just like normal pedals, easily and without extra tools. Just screw them on your bike crank arms and you are ready to pedal! IAV Cycling Dynamics: Assioma supports the advanced metrics IAV Cycling Dynamics: IAV Power Phase and IAV Rider Position. These metrics, combined with the classic power data, allow analyzing in details the pedaling technique and how the cyclist's position on the bike influences performances. IAV Power and Gyroscope: Unlike others, the measurements of Assioma are not affected by errors related to very irregular pedaling (eg. sprint uphill) or the use of oval chainrings. This is because Assioma is able to detect the actual instantaneous angular velocity of the pedal stroke, thus giving you the degree of accuracy of ±1% in any situation. Not only in the laboratory. Bluetooth and ANT+ SMART: Assioma communicates via Bluetooth and ANT+ with bike computers and smartphones, both Android and iOS. Real Dual-Sided Power Data: Assioma DUO provides dual-sided data through real measurements: taken individually on both the left and the right leg; this make it possible to observe with accuracy not only the Total Power, but also the L/R Balance, the Torque Effectiveness (TE), the Pedal Smoothness (PS), etc. Accuracy and Consistency: Assioma provides accurate watt measurements with a great consistency and stability in the actual on-road use conditions and at any temperature between -10°C and 60°C. Thanks to the ATC (Automatic Temperature Compensation) too. Waterproof, resistant and light: Assioma is the lightest pedal-based power meter ever made. Thanks to its compact design, it never interferes with the pedaling. Not even when cornering. The power sensors are protected in a bi-component resin block, extremely resistant to shocks and completely waterproof. Rechargeable and Green: Assioma is the only pedal-based power meter with integrated rechargeable batteries; a single charge ensures 50 hours of use at least. Tested and Guaranteed: Favero Electronics produces in-house each Assioma and thoroughly test it individually: fully satisfying the standards required by current regulations.
Favero Assioma DUO Power Meter PedalsThese Power Meter Pedals from Favero have been designed for high-performance training sessions. Featuring a power sensor on both pedals, they benefit from leading technology to provide you with enhanced readings, not estimations. These pedals provide an in-depth overview of your pedal power, they are Bluetooth and ANT+ ready and include up to 50 hours of battery life. The ideal addition for riders who want to outperform every time. IAV Power System:Many power meters calculate the power using the Average Angular Velocity (AVG) per rotation, instead of the instantaneous Angular Velocity (REAL) value: this may introduce an additional error, up to 4.5% compared to the declared accuracy. Assioma, thanks to its exclusive IAV Power system and an integrated gyroscope, measures the actual instantaneous angular velocity to guarantee the same 1% degree of accuracy with any style of pedalling, even with oval chainrings.Automatic Temperature Compensation:Rain, snow, mud, or sweltering heat: Automatic Temperature Compensation (ATC) ensures exact, consistent watt measurements in any weather condition at temperatures between -10°C and 60°C.Waterproof, Resistant and the Lightest Ever Made:The lightest and most compact pedal-based power meter made by Favero: with no protruding elements, it does not interfere with the pedalling. Not even when cornering. Protected by a bi-component resin block, the power meter sensor is extremely resistant to shocks and fully waterproof.Features: Power Sensor: Power sensor on both pedals Power Measurement: Dual-sided power measurement Cadence Sensor: Included, inbuilt Gyroscope: Included, inbuilt Power Calculation System: IAV (Instantaneous Angular Velocity-based) IAV Cycling Dynamics: Yes Oval-chainring Compatible: Yes Battery Type: Rechargeable Lithium battery Battery Life: At least 50 hours Radio Communication: Bluetooth v4.0, ANT+ PWR profile (CT + PO) Accuracy Power Measurement: 1% Temperature Compensation: -10°C / +60°C Water Resistance Degree: IP67 Q-Factor: 54mm Compatible Cleats: Original LOOK Kéo and Favero cleats (red and black) Bike Type: Racing, Road Made in Italy Warranty: 2 years In The Box: • Left pedal with power sensor • Right pedal with power sensor • Battery charger including plugs (EU, US, UK, AU) • 2 two-meter long micro-USB/USB cables with 2 magnetic connectors • 2 red cleats float 6° (LOOK Kéo compatible) • Hex key and 4 washers for the installation • User manual Total Weight Per Pedal: 151.5g (battery included)Technologies: Easy to Install: Install and transfer your Assioma from one bike to another just like normal pedals, easily and without extra tools. Just screw them on your bike crank arms and you are ready to pedal! IAV Cycling Dynamics: Assioma supports the advanced metrics IAV Cycling Dynamics: IAV Power Phase and IAV Rider Position. These metrics, combined with the classic power data, allow analysing in details the pedalling technique and how the cyclist's position on the bike influences performances. IAV Power and Gyroscope: Unlike others, the measurements of Assioma are not affected by errors related to very irregular pedalling (e.g. sprint uphill) or the use of oval chainrings. This is because Assioma is able to detect the actual instantaneous angular velocity of the pedal stroke, thus giving you the degree of accuracy of 1% in any situation. Not only in the laboratory. Bluetooth and ANT+ SMART: Assioma communicates via Bluetooth and ANT+ with bike computers and smartphones, both Android and iOS. Real Dual-Sided Power Data: Assioma DUO provides dual-sided data through real measurements: taken individually on both the left and the right leg; this makes it possible to observe with accuracy not only the Total Power but also the L/R Balance, the Torque Effectiveness (TE), the Pedal Smoothness (PS), etc. Accuracy and Consistency: Assioma provides accurate watt measurements with great consistency and stability in the actual on-road use conditions and at any temperature between -10°C and 60°C. Thanks to the ATC (Automatic Temperature Compensation) too. Waterproof, resistant and light: Assioma is the lightest pedal-based power meter ever made. Thanks to its compact design, it never interferes with the pedalling. Not even when cornering. The power sensors are protected in a bi-component resin block, extremely resistant to shocks, and completely waterproof. Rechargeable and Green: Assioma is the only pedal-based power meter with integrated rechargeable batteries; a single charge ensures 50 hours of use at least. Tested and Guaranteed: Favero Electronics produces in-house each Assioma and thoroughly test it individually: fully satisfying the standards required by current regulations.Buy Favero Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vision Metron 6D Integrated Carbon HandlebarComing kitted out with a continuous carbon composite construction, this road bike handlebar offers maximum stiffness and strength without adding any unnecessary excess weight to your ride. Ready for both training and competing, its reinforced carbon fibre build also ensures a great strength to weight ratio, while its unidirectional (UD) carbon finish keeps its weight low. Mixing aerodynamics and ergonomics, Vision has equipped this model with a unique shape that uses an Aero-Ergo central section for smooth, agile and efficient handling as you change position and maintain your momentum. Another highlight is its internal cable routing with guides that accommodate wiring for electronic shifting, making it ideal for use with Di2 systems. Coming complete with a traditional design with comfortable geometry, the Metron 6D integrated handlebar is classed as the stiffest and most aero-integrated handlebar and stem system from Vision. Features: Material: Continuous Carbon composite construction with reinforced and textured lever area Finish: Unidirectional (UD) Carbon Use: Road, Track Shape Design: Compact Stem Angle: -6 degrees Di2 Compatible: Cable groove compatible with updated Di2 systems with larger internal cable tunnel Aero-Ergo flat-top riser central section Straight top (0 degrees Forward angle) Includes: Standard computer mount, Garmin computer mount, Spacers kit, Carbon top cap, Compression device and Junction box cover Weight: 90mm Option: 365g; 100x400mm Option: 396g; 100x420mm Option: 403g; 110mm Option: 415g; 120mm Option: 433g; 130x420mm Option: 434g and 130x440mm Option: 443gTechnologies: Aero-Ergo: Mixing aerodynamics and ergonomics, the unique shape includes our Aero-Ergo central section. Reinforced: Reinforced carbon fibre construction gives a great strength-to-weight ratio. Traditional Design: 0 degrees forward angle for the rider who is looking for a more traditional position on the bike.Manufacturer's Part Number: 670-0238010030 40cm 90mm 670-0238001030 40cm 100mm 670-0238002030 42cm 100mm 670-0238003030 42cm 110mm 670-0238004030 42cm 120mm 670-0238009030 42cm 130mm 670-0238006030 44cm 130mmBuy Vision Components from Chain Reaction Cycles, the World's Largest Online Bike Store.