Built purely with winning in mind, these forks come equipped with a super-smooth performing Solo Air spring, which combines with the adjustable Motion Control damper to keep you in control and to maintain your speed over rough, technical terrain. XC Fork with Boost Spacing The SID World Cup's main weight saver is a 1-piece carbon steerer and crown for ultimate stiffness and responsiveness. When combined with Boost technology, this version of the SID World Cup can run wider tyres that increases traction, stability and grip. The Boost standard uses a wider and stiffer axle to wheel interface, which grants even greater performance. It features compression adjustment for fine-tuning and has been designed to achieve the perfect balance between stiffness, speed and weight. Additional Features: Damper Adjustment: Crown, remote (included) Fork Offset: 51mm Maxle Included: Maxle Stealth Manufacturer's Part Number: 00.4019.468.015 Please Note: Shock pump or service kit not included Technologies: Solo Air: Solo Air is like a Buddhist monk. Its enlightened design lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. So they’re always in perfect equilibrium, like Yin and Yang. Giving you a plush, predictable ride you can set up in seconds, with the lightest weight air spring on the market Rapid Recovery: The Rapid Recovery System allows the shock to recover faster between consecutive bumps, letting the wheel track the ground with greater precision. This more active suspension system doesn’t pack up and enables the bike to ride in a higher and softer part of the spring rate. Rapid Recovery gives the rider access to more available wheel travel, bump after bump, to achieve a smoother and more controlled ride Motion Control XX: Motion Control damping is seamless, effective, and offers a simple low-speed compression adjustment coupled with a blow-off valve. The XX Motion Control DNA Damping features Rockox's XLoc Remote Lockout System, providing a lightweight and highly ergonomic high-speed solution Air Guides: RockShox print Air Guides on all their air-sprung forks. It will help you set up your suspension in seconds instead of minutes and more time on your bike equals more chances to earn King of the Mountain on your favourite trail. Boost: Boost is the standard wheel and drivetrain specification that opens the opportunity for improved frame geometry with shorter chainstays, wider and stiffer suspension pivots, a wider range of chainring options, as well as more clearance for bigger tyres and wider, stiffer wheels. Maxle Stealth: Who knew RockShox could make a thru axle disappear? The updated Maxle Stealth offers a light, low profile alternative to Maxle Lite and Maxle Ultimate
Specification:Default Function: AXS - Rear Derailleur,Orientation: Pair,Control Points: Single,Clamp: n/a,Compatible with ANT+ devices: Yes,Lever adjust: n/a,Multi-position: n/a,Battery size: CR2032,Color (SL): Black.
Riders have been asking for it, Marzocchi heard the call and has proudly delivered.The new Z1 Coil builds on the legacy of the single crown fork that started the revolution way back in the 90s the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers.Key Features:Chassis: 36mm.,Travel:160mm, 170mm (29 only).,170mm, 180mm (27.5 only),.,Wheel: 27.5 or 29.,Axle: 15QRx110.,Damping: GRIP (compression + rebound).,Spring: Tempered Silicone-Chromium Steel.,Steerer: 1.5 Tapered Aluminum.,Stanchions: Ø36mm Black Anodized.,Rake: 44mm.,Colour: Matte Black or Gloss Red..
Riders have been asking for it, Marzocchi heard the call and has proudly delivered.The new Z1 Coil builds on the legacy of the single crown fork that started the revolution way back in the 90s the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers.Key Features:Chassis: 36mm.,Travel:160mm, 170mm (29 only).,170mm, 180mm (27.5 only),.,Wheel: 27.5 or 29.,Axle: 15QRx110.,Damping: GRIP (compression + rebound).,Spring: Tempered Silicone-Chromium Steel.,Steerer: 1.5 Tapered Aluminum.,Stanchions: Ø36mm Black Anodized.,Rake: 44mm.,Colour: Matte Black or Gloss Red..
The new Sapphire is bigger and better - simple as that. A new chassis design utilizes 34mm stanchions and a stronger casting design to keep up with today's demanding riding standards. A slightly modified air spring provides an extremely supple begging stroke, improved mid-stroke support and a progressive end for control on the big hits. Combine that with the proven damping features & characteristics of the Diamond, this fork is the new standard.Quick Range Low Speed CompressionWith a quick turn of the knob, the low speed circuit is restricted providing a nice platform for climbingHigh Speed Compression30 clicks of dynamic high speed compression adjust at your fingertips. Designed to be a usable range from start to finish so go right ahead and max it out!OTT "Off The Top"This exclusive & proven DVO design brings comfort to a new level. By externally adjusting the pre-load on the negative spring, you have 100% control over the initial part of the stoke. Set your air pressure to control your mid-stroke support and bottom out. Set your OTT to maximize comfort and traction.Closed Cartridge Bladder SystemJust like the Jade coil shock, the bladder is compressed rather than expanded, offering incredible small bump sensitivity and durability.Specifications:Intended Use - Trail/XC,Model Name - Sapphire D1,Damper - D1 Damper,High speed compression,6 position low speed compression,Rebound,Air Spring Features - Air Pressure Adjust, External OTT Off The Top.,Travel - 27.5" = 130 - 150mm/29" = 120 - 140mm,Stanchions - 34mm,Crown - 27.5" = 42mm offset/29" = 44mm offset,Axle to Crown - 27.5" = 545 at 150mm travel/29" = 552 at 140mm travel,Wheel Size - 27.5, 29/27.5 PLUS Up to 3.0 Tire,Hub Spacing - Boost 110mm,Axle Type - 15mm Bolted Axle,Weight - 1900g,Steerer Options - Tapered Alloy,Rotor Mount - 160mm Direct,Lowers - Magnesium Disc Only.
Built to flatten every terrain on your way up, down and over the mountain, the confidence-inspiring DVO Sapphire D1 lets you ride fearlessly and comfortably. Providing six clicks of low-speed compression adjustment and over 30 high-speed adjustments, as well as Off The Top (OTT) and Advanced Volume Adjust (AVA) adjustability, every eventuality is catered for as you conquer every trail. Equipped with a further 14 clicks of shim stack-controlled damping and a closed cartridge bladder system, using different configurations to make the most of every ride is just a tweak or two away. A top-end fork for any ride, the DVO Sapphire D1 29 shines brightest when pushed to the limits.
DVO Suspension Sapphire D1 Boost Fork 29"This durable Boost Fork from DVO Suspension features a hard-wearing a lightweight aluminium construction and the finest technology DVO has to offer. Benefiting from an assortment of surface-smoothing adjustments, this D1 model lets you tailor your ride for your chosen route.Boost-Sized, 29" ForkEnsuring you have the most composed and comfortable ride on every outing, this excellent fork features a wide range of adjustments. This includes six clicks of low-speed compression adjustment and over 30 high-speed adjustments. alongside Off The Top (OTT) and Advanced Volume Adjust (AVA) damping. With a further 14 clicks of shim stack-controlled damping, no terrain is too much for this stellar suspension set-up.Features:Axle Type: 15mm Bolted- Boost SpacingSteerer Material: AluminiumCrown Material: Forged AluminiumStanchion Material: Aluminium, 34mmLower Material: Magnesium castingSuspension: Air, OTT adjustment (negative spring preload)Damping: Closed cartridge bladder systemSteerer Diameter: 1 1/8-1.5", taperedAdjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressureTravel: 140mmAxle: 15x110mm Boost thru-axle (bolted)Offset: 44mmAdjustments: High/Low-Speed Compression, Rebound, Volume SpacersWheel Size: 27.5; 29Weight: 1900gBuy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Sapphire D1 Boost Fork 29"This durable Boost Fork from DVO Suspension features a hard-wearing a lightweight aluminium construction and the finest technology DVO has to offer. Benefiting from an assortment of surface-smoothing adjustments, this D1 model lets you tailor your ride for your chosen route.Boost-Sized, 29" ForkEnsuring you have the most composed and comfortable ride on every outing, this excellent fork features a wide range of adjustments. This includes six clicks of low-speed compression adjustment and over 30 high-speed adjustments. alongside Off The Top (OTT) and Advanced Volume Adjust (AVA) damping. With a further 14 clicks of shim stack-controlled damping, no terrain is too much for this stellar suspension set-up.Features:Axle Type: 15mm Bolted- Boost SpacingSteerer Material: AluminiumCrown Material: Forged AluminiumStanchion Material: Aluminium, 34mmLower Material: Magnesium castingSuspension: Air, OTT adjustment (negative spring preload)Damping: Closed cartridge bladder systemSteerer Diameter: 1 1/8-1.5", taperedAdjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressureTravel: 140mmAxle: 15x110mm Boost thru-axle (bolted)Offset: 44mmAdjustments: High/Low-Speed Compression, Rebound, Volume SpacersWheel Size: 27.5; 29Weight: 1900gBuy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Sapphire D1 Boost Fork 29"This durable Boost Fork from DVO Suspension features a hard-wearing a lightweight aluminium construction and the finest technology DVO has to offer. Benefiting from an assortment of surface-smoothing adjustments, this D1 model lets you tailor your ride for your chosen route.Boost-Sized, 29" ForkEnsuring you have the most composed and comfortable ride on every outing, this excellent fork features a wide range of adjustments. This includes six clicks of low-speed compression adjustment and over 30 high-speed adjustments. alongside Off The Top (OTT) and Advanced Volume Adjust (AVA) damping. With a further 14 clicks of shim stack-controlled damping, no terrain is too much for this stellar suspension set-up.Features:Axle Type: 15mm Bolted- Boost SpacingSteerer Material: AluminiumCrown Material: Forged AluminiumStanchion Material: Aluminium, 34mmLower Material: Magnesium castingSuspension: Air, OTT adjustment (negative spring preload)Damping: Closed cartridge bladder systemSteerer Diameter: 1 1/8-1.5", taperedAdjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressureTravel: 140mmAxle: 15x110mm Boost thru-axle (bolted)Offset: 44mmAdjustments: High/Low-Speed Compression, Rebound, Volume SpacersWheel Size: 27.5; 29Weight: 1900gBuy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prepared for everything from backcountry adventures to day-long epics on your favourite mountain bike (MTB) trails, this suspension fork is engineered for the demands of modern trail riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Another highlight is its genuine Kashima coating on its upper tubes that provides slippery smooth and ultra-durable performance as you carve your way around the mountain. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride. MTB Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-20-235 Black 29" QR110 160mm 51mm 910-20-234 Orange 29" QR110 160mm 44mm 910-20-233 Black 29" QR110 160mm 44mm 910-20-242 Black 27.5" QR110 160mm 44mm 910-20-241 Black 27.5" QR110 160mm 37mm 910-20-240 Orange 27.5" QR110 160mm 44mm 910-20-236 Black 29" QR110 150mm 44mm
This high-quality mountain bike (MTB) suspension fork is part of the prestigious Factory Series, which means it comes trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails to modern enduro racing, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float EVOL air spring and GRIP2 damper with Variable Valve Control (VVC) for undisputed tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Coming complete with 160mm travel as well as many of the brand's finest technologies, this is a great choice of upgrade for conquering everywhere from big backcountry routes to the EWS circuit. MTB Fork with GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Performance Elite Series: Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodised stanchions instead of Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. GRIP2: High-speed compression now with patented VVC (Variable Valve Control). GRIP2 is Fox Suspension's next-evolution sealed cartridge FIT system, the brand's highest-performing gravity-focused damper. Manufacturer's Part Numbers: 910-20-239 Black 27.5" QR110 160mm 44mm 910-20-232 Black 29" QR110 160mm 44mm
Ready to conquer any challenge, these forks are kitted out with an aluminium stanchion tube and magnesium lower tube construction which is more than capable of handling all the abuse from rowdy rides. Taking you towards the podium, these are also fitted with a Charger 2.1 RC2 damper which allows for independent high and low speed compression adjustment. This means you'll be able to benefit from a more customisable set of forks which can adapt to suit your riding style and the terrain conditions. DebonAir Equipped MTB Forks Offering you a coil-like consistent feel throughout the travel, RockShox has also equipped these forks with a highly tuneable DH-specific DebonAir air spring. This makes them ideal at absorbing all the sudden knocks from rock gardens, tree-roots and debris as you race for glory. Completed with ultra-low friction SKF wiper seals and race-proven Maxima Plush damping fluid, these are the ultimate choice of upgrade for riders who want less noise and friction. Technologies: Bottomless Tokens: Bottomless Tokens allow riders to easily custom tune their RockShox fork’s air-spring performance to best match their own riding style and suspension preference. Adding the easy-to-install Bottomless Tokens changes the air-spring curve to resist bottom-out after a big hit, giving aggressive riders the power to attack the trail harder. Removing Bottomless Tokens makes the air-spring curve more linear, enhancing suspension feel for certain types of terrain or trail condition and ensuring riders who are less front-end aggressive benefit from 100 percent of their fork’s travel. DebonAir: A lightweight, highly tune-able air spring designed to offer a coil-like consistent feel throughout the travel - effortlessly soaking up the smallest hits and tracking the slightest changes in the terrain. Sag Gradients: Measurement gradients indicating the current sag and travel settings are conveniently located on the upper tubes so that you always know how much travel you are running. You won't find this anywhere else but RockShox. BOOST: BOOST is the standard wheel and drivetrain specification that opens the opportunity for improved frame geometry with short chain stays, wider and stiffer suspension pivots, wider range of chainring options, as well as more clearance for bigger tyres and wider, stiffer wheels. Charger 2.1 Damper: Completely re-designed to reduce hand fatigue and fight unwanted friction, the new Charger 2.1 increases confidence and control over every trail. Maxima Plush Fluid: Developed with the world's fastest racers, on the world's toughest circuits. Maxima Plush Fluid is designed to protect from suspension wear, reduce friction, and silence damper noise while maintaining a consistent feel in all temperatures.