Race frame from Stay Strong. This is a completely newly designed frame, utilising the key features from the previous For Life models. The V4 is now also available in disc only* or regular v-brake options. Transferring the stiffness of the V1, the oversized tubing of the V2 and the race winning geometry of the V3. The V4 is Stay Strong's fastest frame ever! The frame features triple butted down & toptube, double butted chain & seat stays adding strength while saving weight. We have once again increased frames stiffness for power and speed. Stay Strong's Pro sized frames feature a tapered 1.5 head tube, BB86 bottom bracket, 10mm rear dropouts and built in chain tensioners included. With 15mm & 20mm inserts available upon request. The frame uses a 31.6mm seat post** which reduced weight whilst helping improve stiffness . The smooth welds also help give the all new water decals and graphics a fresh clean look. *Disc only frames have the 10mm disc hanger included. (15mm and 20mm disc hangers available to purchase). **This frame in Pro size up to Cruiser requires a 34.9mm Seatpost Clamp & 31.6mm Seatpost. ###section### Product Specs MATERIAL: Aluminium TOP TUBE LENGTH: 22.25" HEAD TUBE ANGLE: 74° SEAT TUBE ANGLE: 72° CHAIN STAY LENGTH: 14.7" - 15.6" BB HEIGHT: 301.6mm WHEEL SIZE: 20" STANDOVER HEIGHT: DROPOUT SIZE: 10mm - 20mm HEADSET TYPE: INT 1-1/8 1.5 BB TYPE: BB86 SEAT TUBE DIAMETER: 31.6mm BRAKE MOUNTS: Disc Brake Only WEIGHT: 1628g / 3.58lb ###section### Product Highlights BMX Racing Specific Geometry Race Specific Frame Lightweight and strong aluminium construction Triple butted tubing for added strength Disc Brake Mounts
Race frame from Stay Strong. This is a completely newly designed frame, utilising the key features from the previous For Life models. The V4 is now also available in disc only* or regular v-brake options. Transferring the stiffness of the V1, the oversized tubing of the V2 and the race winning geometry of the V3. The V4 is Stay Strong's fastest frame ever! The frame features triple butted down & toptube, double butted chain & seat stays adding strength while saving weight. We have once again increased frames stiffness for power and speed. Stay Strong's Pro sized frames feature a tapered 1.5 head tube, BB86 bottom bracket, 10mm rear dropouts and built in chain tensioners included. With 15mm & 20mm inserts available upon request. The frame uses a 31.6mm seat post** which reduced weight whilst helping improve stiffness . The smooth welds also help give the all new water decals and graphics a fresh clean look. *Disc only frames have the 10mm disc hanger included. (15mm and 20mm disc hangers available to purchase). **This frame in Pro size up to Cruiser requires a 34.9mm Seatpost Clamp & 31.6mm Seatpost. ###section### Product Specs MATERIAL: Aluminium TOP TUBE LENGTH: 22.75" HEAD TUBE ANGLE: 74° SEAT TUBE ANGLE: 72° CHAIN STAY LENGTH: 14.7" - 15.6" BB HEIGHT: 301.6mm WHEEL SIZE: 20" STANDOVER HEIGHT: DROPOUT SIZE: 10mm - 20mm HEADSET TYPE: INT 1-1/8 1.5 BB TYPE: BB86 SEAT TUBE DIAMETER: 31.6mm BRAKE MOUNTS: Disc Brake Only WEIGHT: 1647g / 3.63lb ###section### Product Highlights BMX Racing Specific Geometry Race Specific Frame Lightweight and strong aluminium construction Triple butted tubing for added strength Disc Brake Mounts
Fox Suspension 36 Float Performance Boost ForkAn ideal addition to your mountain bike's (MTB's) front end for taking on the toughest enduro trails in the World, the 36 Float Performance fork will soak up the biggest drops and hits as you dominate on all types of terrain.This high-quality mountain bike (MTB) suspension fork is trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float air spring and GRIP damper for excellent tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Equipped with some of Fox's finest technologies, this suspension fork is a great choice of upgrade for singletrack trail riding, bike park routes and enduro racing.Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.E-MTB Compatible Suspension ForkCompatible electric mountain bikes (E-MTB), this suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.Fox Suspension GRIP DamperFox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork.Float Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels, which functions to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Black Anodized Intended Use: Trail Air Spring: FLOAT EVOL Damper: GRIP (Open/Medium/Firm) Travel: 160mm Wheel Size: 27.5" Axle: 15QR x 110mm Boost Steerer: 1.1.8" to 1.5" Tapered Offset: 44mm Air Channels: Yes Bleeders: Yes Floating Axle: Yes, Kabolt X Axle 15QR x 110mm Boost Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (Sold separately)Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (Available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Performance Boost ForkAn ideal addition to your mountain bike's (MTB's) front end for taking on the toughest enduro trails in the World, the 36 Float Performance fork will soak up the biggest drops and hits as you dominate on all types of terrain.This high-quality mountain bike (MTB) suspension fork is trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float air spring and GRIP damper for excellent tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Equipped with some of Fox's finest technologies, this suspension fork is a great choice of upgrade for singletrack trail riding, bike park routes and enduro racing.Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.E-MTB Compatible Suspension ForkCompatible electric mountain bikes (E-MTB), this suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.Fox Suspension GRIP DamperFox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork.Float Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels, which functions to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Black Anodized Intended Use: Trail Air Spring: FLOAT EVOL Damper: GRIP (Open/Medium/Firm) Travel: 160mm Wheel Size: 27.5" Axle: 15QR x 110mm Boost Steerer: 1.1.8" to 1.5" Tapered Offset: 44mm Air Channels: Yes Bleeders: Yes Floating Axle: Yes, Kabolt X Axle 15QR x 110mm Boost Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (Sold separately)Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (Available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Part of the Performance Elite series, this suspension fork features the exact same adjustments, damper, weight and 7000 series aluminium upper tubes as the Factory Series. The only difference is this version has an anodised finish on its upper tubes for extra protection against wear and corrosion, making it perfect for all weather and terrain conditions. Coming equipped with stiff 15QR x 110mm Boost axle spacing, 160mm travel and a wide range of adjustments, this is a great choice of upgrade for reliable front-end suspension performance wherever your next mountain adventure takes you. Float EVOL Air Spring Optimises small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and a more tunable bottom-out progression. Fox Suspension GRIP Damper Fox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork. Technologies: Lower Leg Arch: This suspension fork's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity-style riding. Lower Leg Bleeders: Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness. Lower Leg Bypass Channels: Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Kabolt X Axle: Kabolt X is a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, single-sided pinch bolt design.
This means that you'll enjoy smooth and reliable shock absorption as you blast across rock gardens, tree roots and debris on your MTB adventures. RockShox has also added SKF wiper seals and Maxima Plush damping fluid to this model, which all work overtime to reduce friction, silence noise and provide lasting fork performance. Updated highly tunable DebonAir™ air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain. Designed to reduce hand fatigue and fight unwanted friction, the Charger™ 2.1 damper increases confidence and control over every trail. Charger™ 2.1 RC2 damper option featuring independent high and low speed compression adjust. Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. Maxima Plush damping fluid reduces friction and silences damper noise. Ultimate foil graphics package.
Built for maximum performance, this MTB fork is equipped with 38mm aluminium upper tubes, magnesium lower legs and a forged, hollow aluminium crown for a perfect strength to weight ratio. RockShox has also kitted out this model with a highly-tuneable DebonAir air spring, which delivers an amazingly smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain. Coming trail-ready with RockShox's highest performing Charger technology, this model also uses its Charger 2.1 RC2 damper to give you independent high and low-speed compression with rebound adjustment. Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail. Options Explained: for example, the "27.5" 160mm 38mm" option is designed for use with 27.5" wheels, has 160mm of travel and 38mm of offset. Technologies: - 38mm chassis for increased stiffness and rider confidence - Highly-tuneable DebonAir™ air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - RockShox's highest performing Charger technology. Charger 2.1 RC2 damper features independent high and low-speed compression with rebound adjustment – designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Short fender compatible (RockShox fender sold separately)
Fox Suspension Float DPS Factory Shock SVFeaturing a lightweight EVOL air spring, this mountain bike (MTB) rear shock delivers exceptional responsiveness and sensitivity as you charge from trail to trail. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails.Factory Series MTB Rear Shock with DPS DamperReady for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain.Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency.Features: Body Finish: Genuine Kashima Coat Air Sleeve Finish: Genuine Kashima Coat Use: MTB Lever Actuated: Yes, 3-position lever Damper: DPS with three adjustment positions: Open/Medium/Firm modes Open mode adjust tuning range (1, 2, 3), Rebound and Air Spring Pressure Air Sleeve: One-piece EVOL air sleeve Piston Valve: Dual Piston valve Type: Standard Volume (SV)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Manufacturer's Part Numbers: 972-01-497 Black 6.5 x 1.5" 972-01-498 Black 7.25 x 1.75" 972-01-477 Black 7.875 x 2.0"Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory 3Pos-Adj LV ShockWell-equipped for conquering your way around your local trails and beyond, this Factory Series mountain bike (MTB) rear shock features a DPS damper, an EVOL air spring and a three-position lever for easy adjustability. Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this model boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements any ride.DPS Damper, EVOL Air Spring and AdjustmentsEngineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj LV Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Three-position lever actuated Open, Medium and Firm modes, Open mode adjust tuning range (1, 2, 3), rebound and air spring pressure Lever Actuated: Yes Remote Actuated: NoTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ideal training companion for the podium-chasing rider, this left-arm model is compatible with Shimano XTR M9020 cranksets and provides immediate cadence and power data to keep you riding at your peak at all times. Transmitting the info to your onboard computer or smartphone via ANT+ and Bluetooth connectivity, this lightweight unit gives readings to within +/-1%, making sure every pedal stroke is as effective as can be. IPX7 waterproof rated and equipped with 100+ hours of Lithium Ion battery life, the Precision is a phenomenal way to gauge your riding gains.
Metron 5D Integrated HandlebarThe stiffest and most aero integrated handlebar and stem system.,All carbon construction,Di2 compatible with integrated junction box compartment and wiring conduits.,10° forward angle for a more natural wrist position and wider elbow stance for easier breathing.,80mm reach, 125mm drop..
Manitou Mattoc Comp Boost MTB Suspension ForkThis Boost-spaced mountain bike (MTB) fork comes trail-ready with a robust straight-wall aluminium leg construction, which makes it ready for all the abuse that's associated with long days in the mountains. Manitou has also equipped this versatile model with an Expert Air spring with IVA, VTT compression and adjustable TPC Cartridge rebound damping. This means that riders will enjoy unparalleled adjustability and supreme dampening performance wherever their trail adventure leads them.MTB Fork with 3-Position Compression AdjustmentComing kitted out with three-positions of compression adjustment (Open, Trail and Lock), plus separate air pressure, air volume and rebound, this high-quality fork is a great choice of upgrade for riders who want to tweak their front-end suspension performance. As a result, you'll enjoy a more rider-tuned feel as you tackle rock gardens, tree roots and debris on your travels. Manitou has also upgraded its winning formula to include low-friction dust seals that improve bump sensitivity and IRT air spring adjustability that creates a plush beginning stroke with excellent mid-stroke support. And, a Comp-level Performance package brings Mattoc performance to even more riders.Features: Leg Material: 6000 Series straight wall Aluminium Crown Material: Forged Aluminum, Hollow Axle: 15x110mm Hexlock SL Use: MTB Steerer Diameter: 1.5" Tapered Leg Diameter: 34mm Spring: Expert Air with IVA Compression Damping: VTT Rebound Damping: Adjustable TPC Cartridge Adjustments: Air Pressure, Air Volume, Rebound, 3-position Compression (Open, Trail, Lock) Brake Compatibility: Post Mount 180mm (203mm Max)Max Tyre Size: 67mmOffset: 44mmRide Height: 535-565mmTravel: 160mmE-Pac: Yes Weight: 2072gManufacturer's Part Number: 191-35526-A101 Matt Black 27.5" 160mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.