DJD Rear Bushed HubHalo's DJD BD hubs have become the DJ Disc Single Speed hub of choice for many riders.BD hubs have been utilised successfully in the hardcore BMX market for quite a while, and the advantages of their lighter weight and improved durability over cartridge bearings are pretty well proven, especially when using compact cog sizes.The stresses caused in a Single Speed hub can be huge and, a bush spreads the loads involved over a much larger surface area than ball bearings can achieve, and therefore helps to avoid premature bearing failure.In addition to the BD features, we have fitted a lightweight alloy axle with tough, replaceable, M10 "Bolt-in" Cr-Mo fixings and alloy caps. We also know that bolt-in fittings can be tricky if the axle starts to spin when turning the bolt, (as you have nothing to hold) - so we have also added a 6mm Hex broach deep inside the axle - just in case the axle starts to spin when you don't want it to ! 14mm adaptors included: the large surface faces of the cones allow us to also use 10-14mm adaptor washers - making this hub suitable for 10mm or 14mm dropouts.,Forged & CNC finished body with slotted flanges.,Bush Driver with screw-on 11T cog.,Hollow Alloy axle with 6mm central hex.,Cr-Mo M10 Bolt-in fixings.,Super strong lightweight alloy axle.,2 sealed main body bearings and 1 hardened plastic driver bush.,Lightweight forged CNC finished alloy hub shell.,11T x 1/8" drivers sprocket fitted standard. ,(9,10,11,13,14,16t sprocket also available)..SpecificationsMaterial : Forged & CNC finished aluminium,Drillings : 32h or 36H,Bearings : 6902 cartridge bearings,Spacing : 135mm,Disc Mount : 6 bolt,Dimensions : C-L 34mm, C-R 35mm, flange 58mm,Colour : Red or Black,Weight : 326g.
CNC machined alloy clamp with single Cr-Mo bolt and pivoting Cr-Mo threaded insert to avoid Banana Bolt Syndrome and the dreaded bolt strip-teaseSleek, CNC machined Aluminium bodySingle Cr-Mo boltAnti-Banana bolt pivot systemStrong Cr-Mo threaded insertWeight: Approx 21g.
Single File Lock on GripsOur old faithful File Lock grip gets a face lift!The Single File uses a single alloy clamp on the inside to give you more space for your hands on the outside of the bar. This gives you more comfort and ultimately more control with more usable width on your bar.Features:File pattern grip for all weather performance,Tapered core with closed rubber end for precise fit and comfort,Alloy single clamp design with 3mm hex key,133mm length and 30mm diameter,25A VEXK Compound for traction and durability,Available in 8 colours.
Each link overlaps the next, combined with square riveted pins, reduces risk of chain breakage (falling apart)Grind friendly straight outer plate edges, avoid getting hung upCutaway inner plate edges give improved sprocket wrap, allowing perfect running down to 8 teeth sprocketsSlotted plates, reduce excess weightSCM steel with Carburized Nitrogen heat treatment gives breaking strength of 1300Kgf(Std chain is approx 850 Kgf).Gusset's special gold Bling Slink Chain features hollow link pins and cut-away side plates which bring the weight down to a tiny 330g for 102 Links or 360g for the 1/8 Inch verison.
Single Speed adaptor kit for 8/9 speed cassette hubsPair of CNC machined aluminium spacers that look much sweeter than a bunch of washers to space out a Deep-tooth single sprocketCNC Cr-Mo cogs have wide 7mm base to avoid ripping into the cassette bodyBuilt-in offset optimises chainlineSupplied with 16T 5/64 cog and lockringNote: are suitable for narrow 5/64 inch (9 speed) chains
Single Speed adaptor kit for 8/9 speed Shimano compatible cassette hubsPair of CNC machined aluminium spacers offer lateral support to ‘Deep-tooth’ single sprocketBuilt-in offset optimises chainlineSupplied with 16 and 18T 3/32 cogs and lockring.Note: Cog teeth are 3/32 6/7/8 SpeedNot suitable for narrow 5/64 (9 speed) chains12,13,14,16,18 and 20T cogs also available separatelyIf run with smaller than 14T - must be used with 3/32 inch chain - as 1/8 inch chain will bite into spacers.
Gusset Quick Fix PIN's. Non re-usable joining PINs for any Slink half link chains. This reinforced pin helps you connect your chain in a simple and safe way.1/8" or 3/32"Black..
Micro gear Single Speed adaptor kit for 8/9 speed cassette hubs.Pair of CNC machined aluminium spacers and deep-tooth single sprocket.Built-in offset optimises chainline.Supplied with 12 & 13T 3/32" cogs* and lockring.Compatible with 6/7/8 Speed chains. Not suitable for Wide 1/8" (BMX) or narrow 5/64" (9 speed) chains.14,16,18 and 20T cogs also available separately.
If you've got a Campag multiple speed rear wheel and you want to run single speed for a while, just switch the multiple speed cassette for this simple cog and spacer kit. (*and ensure you can either adjust or tension the chain suitably).The large 10mm wide foot on the CNC machined and drilled steel cog spreads the load over a greater surface area than a straight single cog and will significantly reduce the risk of the cog biting into your alloy freehub splines.The superlight drilled, splined alloy spacers are offset to allow a degree of chainline adjustment.Supplied with an 18T cog. (16 and 17T sizes are available separately).Campag 9/10spd hub fitting.CNC machined steel Cog.Superlight drilled cog and spacers.10mm wide foot avoids damage to freehub.Variable chainline offset.5/64" Teeth fits 1-9speed chains..
CNC machined and drilled lightweight steel cogs.10mm Wide foot spreads the loads over a greater surface area than a straight single cog and will significantly reduce the risk of the cog biting into your alloy freehub splines.5/64 Inch Teeth fits 1-9speed chains.16,17 and 18T sizes.Designed to work with Gusset 66C Campag SS convertor..
Café Racer's chain for the Fixie Single speeder.Superlight, superstrong, superfast.Lightweight cut-out link plates (inner and outer).Lightweight hollow link pins.Classic Retro profiled shapeStraight plates give minimum chain stretch.½ x 1/8 Inch onlyC/P Silver finish.Weight 255g.
Economical and functional Fixed cogs.CNC machine finished from pressed hot rolled mill steel plate.Consistent and durable.Narrow 3/32" teeth (can run on 1-9speed chains)Fits regular 1.37" x 24Tpi. hubs.Chrome plated finish.13T- 26g14T - 32g15T - 40g16T - 48g17 - 57g18 - 64g.Note: General Fixed cog check:for correct fixed use, the fixed cog should NEVER move on the hub when pedal force is applied in both directions. i.e. if the cog moves, then something is wrong. Continued use with a fixed cog that moves will result in damage to the hub.