Coming kitted out with a Super Light Steel (SLS) construction, this mountain bike (MTB) rear shock spring is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with. Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately). Manufacturer's Part Numbers: 033-22-046 Orange 375lb 033-22-047 Orange 400lb 033-22-048 Orange 425lb 033-22-049 Orange 450lb 033-22-050 Orange 475lb 033-22-051 Orange 500lb 033-22-063 Orange 525lb 033-22-052 Orange 550lb
Featuring a Super Light Steel (SLS) construction, this mountain bike (MTB) rear shock spring is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with. Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately). Manufacturer's Part Numbers: 033-22-030 Orange 350lb 033-22-031 Orange 375lb 033-22-032 Orange 400lb 033-22-033 Orange 425lb 033-22-034 Orange 450lb 033-22-035 Orange 475lb 033-22-036 Orange 500lb 033-22-037 Orange 550lb 033-22-038 Orange 600lb
This mountain bike (MTB) rear shock is part of Fox Suspension's Performance Series and features a hard-wearing anodised finish for excellent durability and corrosion resistance on your ride. This model is also equipped with a lightweight one-piece EVOL air spring, which ensures you'll benefit from its improved responsiveness and sensitivity as it absorbs the sudden knocks and bumps associated with trail-riding. DPS Damper and Adjustments This trail-ready rear shock is kitted out with a dual-piston system (DPS) damper that pairs exceptional bump compliance with efficiency, helping you conserve energy for when you need it most. Its damper uses a three-position lever to allow you to easily switch between its open, medium and firm modes. Fox Suspension has also equipped this model with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, so you can fine-tune your rear suspension to fit in with your riding style as well as the terrain conditions. Technologies: DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-489 Black 7.5x2.0" 972-01-490 Black 7.875x2.0" 972-01-491 Black 7.875x2.25"
Designed to exceed the demands of Fox Suspension's Factory-level riders, this Factory Series mountain bike (MTB) rear shock is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish that complements any ride. EVOL Air Spring and Adjustments The Float DPS helps you make perfect turns without cutting corners by using a dual-piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel. The Fox Suspension Float DPS Factory Remote Shock's lightweight chassis, EVOL air spring, and dual-piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-509 Black 6.5x1.5" 972-01-512 Black 7.25x1.75" 972-01-508 Black 7.5x2.0"
This Factory Series mountain bike (MTB) rear shock is built for long days on your local trails with your riding buddies as well as exploring new routes on your own adventures by providing coil performance for the trail and beyond. It features a hard-wearing chromoly (CrMo) steel shaft coating that has ultra-low friction properties and is highly durable as you tackle demanding terrain conditions on your ride. Packed with many of Fox Suspension's proven technologies, this model is also part of the renowned Factory Series family that's designed to exceed the demands of Factory-level riders. Coil Spring and Adjustments Ready for wherever your next trail ride leads you, this rear shock is kitted out with a coil spring ready design and a range of adjustment features to help you dial in your ideal settings. Fitted with an independent two-position lever, you'll benefit from being able to easy switch between open and firm modes to suit the terrain conditions. In addition, its low-speed compression and rebound adjustments make it simple to fine-tune its suspension performance to match your riding style for a more rider-tuned feel. Coil performance for the trail and beyond. Answering the call of riders seeking the ultimate in plush suspension, the Fox Suspension DHX Factory 2Pos-Adj Shock brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit – 2 position adjuster. Optimised reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. MCU bottom-out bumper. Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access). Spring preload collar with detents and max / min number of clicks and direction arrow. Full diameter spring retainer with wire ring (like DHX2). Spring scuff guard on body (like DHX2). Manufacturer's Part Numbers: 978-01-029 Black 210x50mm Metric 978-01-031 Black 210x52.5mm Metric 978-01-033 Black 210x55mm Metric 978-01-035 Black 230x57.5mm Metric 978-01-037 Black 230x60mm Metric 978-01-039 Black 230x65mm Metric 978-01-041 Black 185x52.5mm Trunnion 978-01-043 Black 185x55mm Trunnion 978-01-045 Black 205x60mm Trunnion 978-01-047 Black 205x62.5mm Trunnion
Part of Fox Suspension's renowned Factory Series, this mountain bike (MTB) rear shock is equipped with a stunning genuine Kashima coating that offers slippery smooth performance, increased durability on the more demanding of terrains, and also complements your ride with its eye-catching finish. Adjustable Rear Shock with Variable Valve Control (VVC) Coming feature-packed with a design that's intended to exceed the demands of Fox Suspension's Factory-level riders, this rear shock is kitted out with a two-position lever. Developed for ease of use, its lever makes it simple to switch between open and firm modes to suit the terrain or course conditions on your ride. Another highlight is its range of adjustment features that include high and low-speed compression as well as high and low-speed rebound. This version is also equipped with Variable Valve Control (VVC) for improved high-speed rebound tunability. As a result, you'll be able to dial in your ideal settings to match your riding style and enjoy more rider-tuned rear suspension performance. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom-out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.
This Fox Float DPX2 Factory MTB shock features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade for smoother and more reliable performance. Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. Three-position lever with adjustable Open Mode offers 10 clicks to fine-tune compression. Recirculating oil damper design for more control. EVOL Air Sleeve: Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer Part Numbers: 190mm, 45mm Stroke: 973-01-314 210mm, 50mm Stroke: 973-01-315 210mm, 52.5mm Stroke: 973-01-316 210mm, 55mm Stroke: 973-01-317 230mm, 65mm Stroke: 973-01-312 230mm, 60mm Stroke: 973-01-313 185mm, 44mm Stroke: 973-01-318 190mm, 50mm Stroke: 973-01-304 200mm, 50mm Stroke: 973-01-305 200mm, 57mm Stroke: 973-01-306 215mm, 65mm Stroke: 973-01-307
Providing you with 4-way independent adjustment, this DBAir model gives you complete control over traction, shock-absorption and overall smoothness as you batter through a variety of terrains. With the double-barrel Twin Tube technology on hand to manage the damping of your compression and rebound strokes and the steel construction of the unit making it highly impact-resistant, no trail is too intimidating for this robust and innovative rear shock. Technologies: Twin-Tube Technology: Exclusive Twin Tube Technology circulates oil continuously through the damping valving to achieve highly controllable, independent damping for both compression and rebound strokes. This unique design moves oil through externally adjustable valving instead of the main piston, allowing for superior tunability and eliminating the need for internal valving changes to achieve proper shock setup. 4-Way Independent Adjustments: Low-Speed Compression (LSC): is used to manage traction and chassis stabilization. LSC adjustment eliminates pedal induced "bob", influences small bump sensitivity, reduces brake dive and determines how the bike will react to weight changes. The DBAir CS decouples LSC from HSC so the shock can address the aforementioned issues while still feeling plush and bottomless. High-Speed Compression (HSC): is critical to absorbing energy from high impact forces, such as square edge hits and harsh landings. It also aids in bottom-out resistance. The DBAir CS manages HSC through an adjustable poppet valve and full oil circuit flow path. The wide adjustment range allows for custom, rider-specific tuning. Low-Speed Rebound (LSR): works in concert with LSC to stabilize the chassis and manage traction. It is analogous to the single rebound adjuster on most other rear shocks. Rider-tuned LSR adjustment (combined with LSC) ensures maximum traction during technical climbs, high-speed chatter, off-camber corners and braking in stutter bumps. High-Speed Rebound (HSR): An adjustment unique to the DBAir CS, HSR control enables a bike to recover quickly from deep in suspension travel while allowing for controlled take-offs from jump faces. Independent control of HSR and LSR, eliminates bucking (a high shaft speed problem) while preventing the shock from packing up (a low shaft speed problem) by inducing quick recovery.