Part of the brand's renowned Factory Series, this mountain bike (MTB) rear shock is engineered for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails. Heavyweight Features in a Lightweight Package Designed specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. - Updated chassis and damper. - High-flow main piston. - Air seal package. - Volume spacers with smaller increments. - MCU bottom out bumper. - Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. - Independent firm mode circuit – Clockable 2 position adjuster. - Increased rebound adjuster range (over DPX2). - Optimized reservoir lengths per shock size. - Hydraulic top out feature. - Reduced damper noise. - Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. - Bearing hardware compatible both sides. - Air valve location offers improved frame fitment and pump access. Manufacturer's Part Numbers: 979-01-053 230 x 65mm Metric 979-01-054 185 x 52.5mm Trunnion 979-01-056 185 x 55mm Trunnion 979-01-058 205 x 60mm Trunnion 979-01-059 205 x 62.5mm Trunnion 979-01-041 190 x 45mm Metric 979-01-043 210 x 50mm Metric 979-01-045 210 x 52.5mm Metric 979-01-047 210 x 55mm Metric 979-01-049 230 x 57.5mm Metric 979-01-051 230 x 60mm Metric
Fox Suspension Float X Factory 2Pos-Adj ShockThis mountain bike (MTB) rear shock is part of the prestigious Factory Series and is developed for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails.Heavyweight Features in a Lightweight PackageDesigned specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity.Features: Body Finish: Kashima Coat Air Sleeve Finish: Kashima Coat Use: MTB Adjustments: Independent 2 Position Open/Firm Lever, Low Speed Rebound: 16 Clicks, Low Speed Compression: 11 ClicksTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Air seal package. Volume spacers with smaller increments. MCU bottom out bumper. Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - Clockable 2 position adjuster. Increased rebound adjuster range (over DPX2). Optimized reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. Bearing hardware compatible both sides. Air valve location offers improved frame fitment and pump access.Manufacturer's Part Numbers: 979-01-053 230x65mm Metric 979-01-054 185x52.5mm Trunnion 979-01-056 185x55mm Trunnion 979-01-058 205x60mm Trunnion 979-01-059 205x62.5mm Trunnion 979-01-041 190x45mm Metric 979-01-043 210x50mm Metric 979-01-045 210x52.5mm Metric 979-01-047 210x55mm Metric 979-01-049 230x57.5mm Metric 979-01-051 230x60mm MetricBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X Factory 2Pos-Adj ShockThis mountain bike (MTB) rear shock is part of the prestigious Factory Series and is developed for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails.Heavyweight Features in a Lightweight PackageDesigned specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity.Features: Body Finish: Kashima Coat Air Sleeve Finish: Kashima Coat Use: MTB Adjustments: Independent 2 Position Open/Firm Lever, Low Speed Rebound: 16 Clicks, Low Speed Compression: 11 ClicksTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Air seal package. Volume spacers with smaller increments. MCU bottom out bumper. Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - Clockable 2 position adjuster. Increased rebound adjuster range (over DPX2). Optimized reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. Bearing hardware compatible both sides. Air valve location offers improved frame fitment and pump access.Manufacturer's Part Numbers: 979-01-053 230x65mm Metric 979-01-054 185x52.5mm Trunnion 979-01-056 185x55mm Trunnion 979-01-058 205x60mm Trunnion 979-01-059 205x62.5mm Trunnion 979-01-041 190x45mm Metric 979-01-043 210x50mm Metric 979-01-045 210x52.5mm Metric 979-01-047 210x55mm Metric 979-01-049 230x57.5mm Metric 979-01-051 230x60mm MetricBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X Factory 2Pos-Adj ShockThis mountain bike (MTB) rear shock is part of the prestigious Factory Series and is developed for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails.Heavyweight Features in a Lightweight PackageDesigned specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity.Features: Body Finish: Kashima Coat Air Sleeve Finish: Kashima Coat Use: MTB Adjustments: Independent 2 Position Open/Firm Lever, Low Speed Rebound: 16 Clicks, Low Speed Compression: 11 ClicksTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Air seal package. Volume spacers with smaller increments. MCU bottom out bumper. Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - Clockable 2 position adjuster. Increased rebound adjuster range (over DPX2). Optimized reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. Bearing hardware compatible both sides. Air valve location offers improved frame fitment and pump access.Manufacturer's Part Numbers: 979-01-053 230x65mm Metric 979-01-054 185x52.5mm Trunnion 979-01-056 185x55mm Trunnion 979-01-058 205x60mm Trunnion 979-01-059 205x62.5mm Trunnion 979-01-041 190x45mm Metric 979-01-043 210x50mm Metric 979-01-045 210x52.5mm Metric 979-01-047 210x55mm Metric 979-01-049 230x57.5mm Metric 979-01-051 230x60mm MetricBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X Factory 2Pos-Adj ShockThis mountain bike (MTB) rear shock is part of the prestigious Factory Series and is developed for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails.Heavyweight Features in a Lightweight PackageDesigned specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity.Features: Body Finish: Kashima Coat Air Sleeve Finish: Kashima Coat Use: MTB Adjustments: Independent 2 Position Open/Firm Lever, Low Speed Rebound: 16 Clicks, Low Speed Compression: 11 ClicksTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Air seal package. Volume spacers with smaller increments. MCU bottom out bumper. Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - Clockable 2 position adjuster. Increased rebound adjuster range (over DPX2). Optimized reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. Bearing hardware compatible both sides. Air valve location offers improved frame fitment and pump access.Manufacturer's Part Numbers: 979-01-053 230x65mm Metric 979-01-054 185x52.5mm Trunnion 979-01-056 185x55mm Trunnion 979-01-058 205x60mm Trunnion 979-01-059 205x62.5mm Trunnion 979-01-041 190x45mm Metric 979-01-043 210x50mm Metric 979-01-045 210x52.5mm Metric 979-01-047 210x55mm Metric 979-01-049 230x57.5mm Metric 979-01-051 230x60mm MetricBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory Remote SV Rear ShockFeaturing a dual piston (DPS) damper, an EVOL air spring as well as two-position remote actuation and adjustment, this Factory Series mountain bike (MTB) rear shock delivers uncompromised performance wherever your trail-riding adventure leads you. Packed with features that are designed to exceed the demands of Fox Suspension's Factory-level riders, this model is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish to complement your ride.EVOL Air Spring and AdjustmentsThe Float DPS helps you make perfect turns without cutting corners by using a dual piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel.The Fox Suspension Float DPS Factory Remote SV Shock's lightweight chassis, EVOL air spring, and dual piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Two-position remote actuated Open and Firm modes, rebound and air spring pressure Remote Actuated: Yes Remote Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Factory Series mountain bike (MTB) rear shock is packed with features that are designed to exceed the demands of Fox Suspension's Factory-level riders. Coming kitted out with a genuine Kashima coating, it provides increased durability, silky smooth operation and an eye-catching finish to complement your ride. EVOL Air Spring and Adjustments The Float DPS helps you make perfect turns without cutting corners by using a dual-piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel. The Fox Suspension Float DPS Factory Remote SV Shock's lightweight chassis, EVOL air spring, and dual-piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-510 Black 165 x 45mm Trunnion
When the engineering superpowers of Trek and RockShox combine, the results are anything but ordinary. Completely reimagined, the Super Deluxe Ultimate ThruShaft was created with a go anywhere, ride anything attitude. The ideal match for the next generation of hard hitting all-mountain enduro bikes.FEATURESTrek's exclusive ThruShaft design responds to changes in terrain faster than any other shock on the market,Versatility is key for a go anywhere, do anything attitude. Dial it in with redesigned Low Speed Compression adjustment offering three options to find your perfect match to seize the day.,Featuring an oversized thermal compensator for greater temperature stability and consistent suspension feel on those extra long, extra demanding descents.,Time to adjust. With a “fully checked” damper, your compression settings work independently, not to be bothered by each click of Rebound.,Setting up your Rebound made simple with numerically indicated adjustments to eliminate the number crunching.,Shock controls optimized for frame integration and rider ergonomics,Available in Trek Specific Trunnion ThruShaft 230x57.5 and 230x62.5 configurations.,MegNeg air can is not compatible with MY21 Super Deluxe Ultimate ThruShaft.,Only compatible with purple tokens for positive and negative air spring tuning.
If you're pinned to win, the Super Deluxe Ultimate is the shock of choice for the podium. This is the most advanced shock we've ever made, packed to the hilt with more options for fine-tuning adjustments that meaningfully improve suspension performance. Debuting the next revolution in damper technology, our new RC2T damper is only found at the Ultimate level and features externally adjustable, truly independent High and Low Speed Compression along with an increased range of rebound adjust. Riders can fine-tune damping from the factory base tune for a more personalized feel while factoring in ride style and terrain. Super Deluxe Ultimate sets the new benchmark.Features:RC2T Damper with externally adjustable independent High and Low Speed Compression damping and easy access lever to intuitively go between two compression positions - Open or Pedal. Find complete balance between front and rear.,DebonAir+™ air spring with two new air can options allows you to tune the negative and positive air volume to find the perfect match for every bike.,HotDog Piston™ features the same Low Speed Compression control that Super Deluxe is known for but with less High-Speed Compression, allowing the wheels to get out of the way in rough terrain while providing more grip in high-speed chatter.,Castled bottom-out bumper reducing harsh bottom-outs allowing you to tune the air spring for maximize grip, comfort, and control.,Optional Hydraulic Bottom-Out control provides increased damping to prevent harshness for a bottomless feel.,Increased rebound to 15 clicks providing more range and fidelity.,Increased bushing overlap improves small bump performance and grip.,Premium graphics keeping things fresh.,Separate and independent Open and Pedal pistons tuned exactly for your ride,Maxima Plush damping fluid reduces friction and silences damper noise,Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride..
RockShox Vivid Air R2C Rear ShockThis downhill (DH) focused rear shock comes equipped with a Twin Tube Solo Air air spring for an excellent balance of smoothness, consistency and performance on every ride. Ready for race-day, RockShox has also equipped this model with high and low speed rebound with compression adjustment, so you can dial in your favourite settings to match your riding style as well as the terrain conditions. This gives you a more rider-tuned feel as you conquer your way from trail to trail.The New Downhill Performance StandardTipping the scales 400 grams lighter than the Vivid Coil, the Vivid Air is so obscenely lightweight it's destined to give other downhill shocks a body image complex. But, don't let its trim waistline fool you. This shock is built to take on the toughest courses on the World Cup circuit, combining the consistent, supple feel of a coil shock, with the adjustability, tuning, and unparalleled weight savings of an air shock.- High and low speed rebound with compression adjustment.- Twin Tube Solo Air spring.Counter MeasureCounter Measure reduces the breakaway force of the shock to virtually zero pounds, transforming small bumps into traction-generating performance.Features: Use: Downhill (DH) Air Spring: Twin Tube Solo Air spring Adjustment: High and low speed rebound with compression adjustment Compression Tune: L, M Shaft Eyelet: Standard Body Eyelet: Standard Weight: 586gManufacturer's Part Numbers: 00.4118.121.002 Black 222x70 MReb/MComp 00.4118.121.001 Black 216x63.5 MReb/MComp 00.4118.121.000 Black 200x57 MReb/MCompBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPX2 Factory 3Pos-Adjust LV ShockBringing together the ride quality and tunability of Fox Suspension’s Float X2 and the lightweight simplicity of its dual piston system (DPS), the DPX2 Factory 3 Position Adjustable LV Rear Shock is one of its most advanced trail models. It features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade to add smoother and more reliable performance to your trail-ready mountain bike (MTB).Features: Finish: Genuine Kashima Coat with updated graphics Mount Type: Eyelets Compatibility: Frames with standard eyelet mounts Use: All-Mountain (AM), Trail Damper: Float DPX2 with 3-position lever with adjustable open mode offers 10 clicks to fine-tune compression, recirculating oil damper design for more control Air Sleeve: One-piece extra volume (EVOL) air sleeve Volume: Large volume Sizes: Imperial and metric sizes Shock Adjustment: Lever on shock or remote (optional remote sold separately) Full Lockout: No Shock Pump Included: No Mounting Kit Included: No (mounting hardware is bike frame specific)Manufacturer's Part Number: 190mm, 45mm Stroke: 973-01-314; 210mm, 50mm Stroke: 973-01-315; 210mm, 52.5mm Stroke: 973-01-316; 210mm, 55mm Stroke: 973-01-317; 230mm, 65mm Stroke: 973-01-312; 230mm, 60mm Stroke: 973-01-313; 185mm, 44mm Stroke: 973-01-318; 190mm, 50mm Stroke: 973-01-304; 200mm, 50mm Stroke: 973-01-305; 200mm, 57mm Stroke: 973-01-306; 215mm, 65mm Stroke: 973-01-307Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. A three-position lever with adjustable open mode offers 10 clicks to fine-tune compression. There's also a recirculating oil damper design for more control EVOL Air Sleeve: This lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Fox Float DPX2 Factory MTB shock features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade for smoother and more reliable performance. Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. Three-position lever with adjustable Open Mode offers 10 clicks to fine-tune compression. Recirculating oil damper design for more control. EVOL Air Sleeve: Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer Part Numbers: 190mm, 45mm Stroke: 973-01-314 210mm, 50mm Stroke: 973-01-315 210mm, 52.5mm Stroke: 973-01-316 210mm, 55mm Stroke: 973-01-317 230mm, 65mm Stroke: 973-01-312 230mm, 60mm Stroke: 973-01-313 185mm, 44mm Stroke: 973-01-318 190mm, 50mm Stroke: 973-01-304 200mm, 50mm Stroke: 973-01-305 200mm, 57mm Stroke: 973-01-306 215mm, 65mm Stroke: 973-01-307