Stay focused as you navigate across challenging offroad surfaces in the adidas Terrex Primeblue Trail Graphic Long Sleeve Running Shirt. Crafted from high-performance Primeblue recycled materials, this tee is lightweight and breathable with moisture-wicking AEROREADY fabric ensuring you stay dry as moisture is quickly drawn away from your skin. Underarm gussets allow air to circulate and disperse heat so your temperature stays regulated while reflective detailing increases your visibility when training in low light. Care Instructions Do not bleach. Do not tumble dry. Do not dry clean. Touch up with cool iron. Machine wash cold. Do not use fabric softener. Use mild detergent only. Wash with like colours. Remove promptly after wash.
Endura Translite Short Sleeve Base Layer IISoft, lightweight and rapidly wicking away sweat, the Endura Translite Short Sleeve Base Layer II brings another level of comfort when worn under your cycling jersey. The Translite Short Sleeve Base Layer II is a great choice for the intense efforts of racing and training in cool conditions or for the steady pace of long-distance rides in milder weather. The quick-wicking extra-fine mesh fabric feels great against the skin and deals quickly with the resulting sweat build-up of harder efforts. Moisture is wicked off the skin so you're not left soaking when you back off the pace. This ensures you'll enjoy comfort for your whole ride, no matter how far or fast you're riding.When you're on the bike, the pre-shaped sleeves lets you get into your riding position without feeling restricted. The cut of the base layer is also tailored specifically for a riding position, while flatlock sleeves enhance comfort still further. Features:Materials: 54% Polyester, 38% Recycled Polyester, 8% ElastaneExtra fine gauge rapid wicking mesh fabric for maximum breathabilitySuper-soft hand touchPre-shaped, forward-facing short sleevesCycle specific panelling with flatlock stitched seamsSuggested temperature range: 15 degrees C +Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Translite Short Sleeve Base Layer IISoft, lightweight and rapidly wicking away sweat, the Endura Translite Short Sleeve Base Layer II brings another level of comfort when worn under your cycling jersey. The Translite Short Sleeve Base Layer II is a great choice for the intense efforts of racing and training in cool conditions or for the steady pace of long-distance rides in milder weather. The quick-wicking extra-fine mesh fabric feels great against the skin and deals quickly with the resulting sweat build-up of harder efforts. Moisture is wicked off the skin so you're not left soaking when you back off the pace. This ensures you'll enjoy comfort for your whole ride, no matter how far or fast you're riding.When you're on the bike, the pre-shaped sleeves lets you get into your riding position without feeling restricted. The cut of the base layer is also tailored specifically for a riding position, while flatlock sleeves enhance comfort still further. Features:Materials: 54% Polyester, 38% Recycled Polyester, 8% ElastaneExtra fine gauge rapid wicking mesh fabric for maximum breathabilitySuper-soft hand touchPre-shaped, forward-facing short sleevesCycle specific panelling with flatlock stitched seamsSuggested temperature range: 15 degrees C +Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Translite Short Sleeve Base Layer IISoft, lightweight and rapidly wicking away sweat, the Endura Translite Short Sleeve Base Layer II brings another level of comfort when worn under your cycling jersey. The Translite Short Sleeve Base Layer II is a great choice for the intense efforts of racing and training in cool conditions or for the steady pace of long-distance rides in milder weather. The quick-wicking extra-fine mesh fabric feels great against the skin and deals quickly with the resulting sweat build-up of harder efforts. Moisture is wicked off the skin so you're not left soaking when you back off the pace. This ensures you'll enjoy comfort for your whole ride, no matter how far or fast you're riding.When you're on the bike, the pre-shaped sleeves lets you get into your riding position without feeling restricted. The cut of the base layer is also tailored specifically for a riding position, while flatlock sleeves enhance comfort still further. Features:Materials: 54% Polyester, 38% Recycled Polyester, 8% ElastaneExtra fine gauge rapid wicking mesh fabric for maximum breathabilitySuper-soft hand touchPre-shaped, forward-facing short sleevesCycle specific panelling with flatlock stitched seamsSuggested temperature range: 15 degrees C +Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura Translite Short Sleeve Base Layer IISoft, lightweight and rapidly wicking away sweat, the Endura Translite Short Sleeve Base Layer II brings another level of comfort when worn under your cycling jersey. The Translite Short Sleeve Base Layer II is a great choice for the intense efforts of racing and training in cool conditions or for the steady pace of long-distance rides in milder weather. The quick-wicking extra-fine mesh fabric feels great against the skin and deals quickly with the resulting sweat build-up of harder efforts. Moisture is wicked off the skin so you're not left soaking when you back off the pace. This ensures you'll enjoy comfort for your whole ride, no matter how far or fast you're riding.When you're on the bike, the pre-shaped sleeves lets you get into your riding position without feeling restricted. The cut of the base layer is also tailored specifically for a riding position, while flatlock sleeves enhance comfort still further. Features:Materials: 54% Polyester, 38% Recycled Polyester, 8% ElastaneExtra fine gauge rapid wicking mesh fabric for maximum breathabilitySuper-soft hand touchPre-shaped, forward-facing short sleevesCycle specific panelling with flatlock stitched seamsSuggested temperature range: 15 degrees C +Buy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
The New Balance London Edition Graphic Impact Run 5-Inch Shorts deliver premium performance. Firstly, the all-important moisture management system, NB Dry - an advanced sweat-wicking solution that will ensure you stay dry and comfortable for the duration of activity, drawing excess moisture away from the skin allows it to evaporate on the quick-drying surface of these technical shorts. Built in an athletic cut, these shorts take comfort seriously with a soft and secure elasticated waistband, internal drawcord and inner brief. Mesh insets also help to keep you breathable and well-ventilated. And finally, with drop-in hip pockets and side zip pockets, you can be sure to keep small valuables such as keys or cash safe and secure, while reflective detailing helps to keep you visible in low-light conditions.
Whatever mountain bike discipline you love, be it Enduro, XC, downhill or weekend trail warrior, the Ranger Gel Short Cycling Gloves provide superb grip and easy dexterity. This short finger mitt version gets TruGel gel pads to add extra protection from the shocks and vibrations of rougher terrain. A snug fit ensures you get a natural feel of the bars too. The compression moulded cuff and hook and loop closure keep the gloves firmly in place and a micro-suede thumb is an easy way to wipe away sweat. The Ranger Gel Short Cycling Gloves continues to set the standard for performance, fit and value in an affordable and great looking MTB glove.
Key Features: High wicking fabrics,Tonal reflective print detail,Subtle graphic print,3 back pockets and 1 security pocket with concealed zip,Silicon rear hem gripper,Full length front zip,Relaxed fit,Main Fabric: 100% Polyester.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.