Shimano RS805 R785 Disc BrakeThe Shimano RS805 R785 Disc Brake provides excellent hydraulic disc brake performance and the shift-lever is compatible with Shimano Alfine Di2 electric drivetrains.The R785 series Di2/hydraulic disc delivers the fastest, most precise shifting possible that is highly customisable. Innovative ICE Technologies hydraulic disc brake heat management systems integrate aluminium materials in disc brake rotors and disc brake pads to radiate out heat by up to 200 degrees to ensure consistent, dependable braking performance regardless of conditions. For road use, braking power is consistent no matter the conditions or the descent. For cyclocross, racers can brake later in the corners, with more power and better modulation in all conditions.R785 Dual Control Lever:Shimano Di2 Precision / Clean, Ergonomic Design. The Di2-enabled ST-R785 offers unmatched shifting options, customisation and personalization to meet the various needs of road and cyclocross riders. When paired with E-Tube enabled Ultegra 6870 Di2 or Dura-Ace 9070 Di2 drivetrains, various Shimano remote and accessory shifters and electronic components, riders have access to a fully customisable and programmable shifting system - including multi-shift speed and shift count - in addition to being upgradeable for new firmware updates over time.With Di2 electronic shifting internals, the svelte form factor of the ST-R785 hydraulic/shift lever is highly ergonomic to accommodate a variety of hand sizes, yet more comfortable, with its compact aesthetics resembling a typical Shimano Di2 road shift/brake lever.The brake lever delivers more stopping power with less effort, especially from the hood position and includes reach and free stroke adjustments in addition to a pad clearance auto-adjustment at the caliper.R785 Hydraulic Disc Brake Caliper:ICE Technologies Braking System Advantages Shimano ICE Technologies hydraulic disc brake systems include advancements that will give riders confident braking on long road descents in all weather conditions.The BR-R785 hydraulic disc brake caliper features a two-piston design with mountain bike stopping power that is tuned for road use. Heat reduction in the caliper is further enhanced with ICE Technologies finned disc brake pads that reduce heat by 50 degrees.Compatible with SM-RT99 disc rotors that are available in 140mm and 160mm sizes, allowing road riders to custom-tune the braking performance according to ride conditions, terrain, and rider size (rotors sold separately). Features: Shimano Di2 Electric Drivetrain optimised Powerfully integrated brake performance Hydraulic braking system incorporated into the Dual Control Lever Hydraulic disc brake caliper with opposed 2 piston Low-profile caliper design Flat mount system Simple set up and maintenance Easy tool access Flat mount system Easy and clean One Way Bleeding bleeding Sold IndividuallyA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Shimano cassette features four carbon fibre carriers and 6 titanium sprockets to make this Shimano's lightest 11-speed Dyna-Sys MTB cassette.Hyperglide sprockets have a computer designed tooth configuration with contoured shift gates, resulting in a crisp smooth shift even under load.11-40T wide ratio gearing allows a more efficient use of energy through finer cadence control.Four separate lightweight carbon fibre carriers reduce weight and increase stiffness giving more precise faster shifts35/31/27/24/21/19T sprockets are all made from titanium to reduce weight and increase durability.Sprockets are cut away extensively and drilled to further reduce weight without reducing rigidityNickel-plated finish offers hard wearing resistance to corrosionAlloy cassette lockringFor use with 11-speed SIL-TEC chains
Garbaruk's 12-Speed Shimano Microspline Cassette is lightweight, durable and perfect for updating your drivetrain to a wider gear range! With a trick construction and equally trick looks, the 12-Speed Shimano Microspline Cassette is a real connoisseur's choice!Lightweight & high quality chromoly steel with aluminium largest cog for incredible durabilityHeat treated monoblock design for lightest possible weightDesigned for Shimano Microspline freehub bodiesProvides smooth shifting and no chain drop when back pedalling10-52T ratio for all the gear range you need for climbing and descendingThe 12-Speed Shimano HG Cassette is designed to be the most durable and lightweight 12-speed wide-range cassette, compatible with Shimano Microspline freehubs. Manufactured using high-quality chromoly steel alloy coupled with the strongest possible aluminium largest cog, it's the ultimate solution for all riders out there who are looking for efficient way to enhance the performance of their MTB or road/CX bike. The cassette is machined and heat-treated to create a monoblock cassette out of steel with only largest cog made out of aluminium. This allows for the best possible durability and rigidity while keeping weight extremely low. If you want it all from your cassette when it comes to performance and durability, look no further than the Garbaruk 12-Speed Shimano Microspline Cassette!
Aksium is a great choice for everyday road riding. With a smart balance of high-quality materials and durable construction it offers aspiring road riders the clear performance benefits of a high-quality wheelset.This Aksium Disc model includes special features aimed at the unique demands of disc brake road bikes. It uses straight-pull spokes for added stiffness and strength and we also increased the spoke count to 24 on both front and rear wheels.With a 17mm internal width these rims are compatible with tires up to 32mm making them versatile comfortable and ideal for challenging road conditions. The disc-specific hubs feature super strong QRM bearings that provide low friction and long-term durability.The Aksium Disc is made for standard quick release and is compatible Center Lock brake rotors. Key benefits Powerful reliable disc brakes for added confidence and control. 24 spokes front and rear for optimized brake torque distribution. Disc-brake optimized rim profile. Disc-friendly spoke geometry and lacing pattern. Smooth efficient ride quality. Wider 17mm (inner width) rims allow tires up to 32mm. High quality QRM cartridge bearings. Straight pull round spokes are stronger than J-bend options. Spokes Shape: straight pull round Count: 24 front and rear Lacing: front and rear crossed 2 Material: steel Nipples: steel ABS Rims Tire: clincher Material: S6000 Aluminum Joint: pinned Valve hole diameter: 65 mm Disc brake specific profile Internal width: 17 mm Height: 21 mm Drilling: traditional ETRTO size: 622x17C Delivered with User guide Rim tape Front QR adapters Rear QR adapters for Instant Drive 360 Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible QRM Auto bearing preload technology Front: Quick release and 12x100 through axle compatible Intended use Recommended tire sizes: 25 to 32 mm ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 75bar/108PSI with a 23mm tyre - 46bar/67PSI with a 52mm tyre Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with included adapters Front axle: 12x100 thru axle easily convertible to quick release with included adapters Not compatible with 15mm through axles Versions Color: Black only Disc standard : 6 Bolts or Center Lock® Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) 12 to 9mm rear adapter for quick release (V2510801 - Delivered with the wheel) 12x135 rear axle adapters (V2510901) with axle V2373401 ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Aksium is a great choice for everyday road riding. With a smart balance of high-quality materials and durable construction it offers aspiring road riders the clear performance benefits of a high-quality wheelset.This Aksium Disc model includes special features aimed at the unique demands of disc brake road bikes. It uses straight-pull spokes for added stiffness and strength and we also increased the spoke count to 24 on both front and rear wheels.With a 17mm internal width these rims are compatible with tires up to 32mm making them versatile comfortable and ideal for challenging road conditions. The disc-specific hubs feature super strong QRM bearings that provide low friction and long-term durability.The Aksium Disc is made for standard quick release and is compatible Center Lock brake rotors. Key benefits Powerful reliable disc brakes for added confidence and control. 24 spokes front and rear for optimized brake torque distribution. Disc-brake optimized rim profile. Disc-friendly spoke geometry and lacing pattern. Smooth efficient ride quality. Wider 17mm (inner width) rims allow tires up to 32mm. High quality QRM cartridge bearings. Straight pull round spokes are stronger than J-bend options. Spokes Shape: straight pull round Count: 24 front and rear Lacing: front and rear crossed 2 Material: steel Nipples: steel ABS Rims Tire: clincher Material: S6000 Aluminum Joint: pinned Valve hole diameter: 65 mm Disc brake specific profile Internal width: 17 mm Height: 21 mm Drilling: traditional ETRTO size: 622x17C Delivered with User guide Rim tape Front QR adapters Rear QR adapters for Instant Drive 360 Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible QRM Auto bearing preload technology Front: Quick release and 12x100 through axle compatible Intended use Recommended tire sizes: 25 to 32 mm ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 75bar/108PSI with a 23mm tyre - 46bar/67PSI with a 52mm tyre Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with included adapters Front axle: 12x100 thru axle easily convertible to quick release with included adapters Not compatible with 15mm through axles Versions Color: Black only Disc standard : 6 Bolts or Center Lock® Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) 12 to 9mm rear adapter for quick release (V2510801 - Delivered with the wheel) 12x135 rear axle adapters (V2510901) with axle V2373401 ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Shimano DXR MX71 Crankset The Shimano DXR component group brings top-level design and engineering to BMX racing. DXR is designed to meet the demands of today's Olympic prospects, and ideal for use at your local race track.NOTE: Chainring not included. Features: BMX HollowTech II crankset for serious racing using the new external bottom bracket bearing system to maximum effect Lightweight yet rigid design is highly durable and incredibly strong HollowTech II bottom brackets bearings are mounted outboard of the frame, increasing there diameter and placing them more widely apart; this dramatically changes the load on the bearings increasing rigidity and bearing service life Comes complete with chainring fixing bolts and nuts For use with a single chainring in a choice of sizes from 34 tooth to 46 tooth Conceived for strength based on proven Saint Hollowtech II design Reinforced pedal/crank interface 9-speed HG chain compatible Chainline: 44mm 68mm BB shell compatible A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Campagnolo Scirocco C17 Road WheelsetThe Campagnolo Scirocco C17 Road Wheelset has been designed with road racing in mind. The wheelset's 17mm internal rim provides enhanced aerodynamics on 25 and 28mm tyres, so you're equipped to out-perform the competition. Performance and EfficiencyThe Scirocco C17 is a high performing wheelset, which provides high-end performance at a more accessible price point; making it an exceptional option for riders seeking the performance, quality construction and exceptional efficiency of Campagnolo wheels.Drag Reduction & Cross Wing StabilityFeaturing a 35mm rim profile, this wheelset offers versatile aerodynamics, which benefits rider efficiency and performance output. This excellent rim profile reduces drag moving forward while remaining stable in crosswind situations.Features: Material: Hub, Rim: Aluminium; Freehub: Steel Rim Height: 35mm Rim Internal Width: 17mm Spoke Count: Front: 16; Rear: 21 Spoke Lacing: Front: Radial; Rear: Mega G3 Weight: Rear: 1.090kg; Front: 0.865kgBuy Campagnolo Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Class-leading XTR 12-speed crank set, integrating the bottom bracket and crank set into a strong, rigid, yet lightweight unit Direct mount chainrings are lightweight and easy to replace while providing increased rigidity, can be set up as single or double Integrated bearing preload design is lightweight and makes installation and adjustments easier than ever Super-lightweight HollowTech II cold forged Duralumin crank arms - hollow design saves weight whilst increasing rigidity and durability Easy to use splined bottom bracket spindle connection provides a rigid and secure interface between crank and spindle With a 52mm chain line and a 168mm Q-factor (1x set up) ideally suited for all-mountain use in conjunction with 10-51T cassette crank set supplied without bottom bracket and chainrings Compatible with all 12-speed direct mount DCE XTR chainrings, please use SM-CRM95 chainrings For use with 12-speed HG+ chains only
Shimano GRX, with its gravel specific ergonomics, optimized gearing options, rugged reliability, and quiet and stable drivetrain, sets itself apart from the rest of the component world GRX hydraulic disc brake 11-speed Di2 STI's give you control, modulation and power with minimal effort in all riding conditions Higher brake lever axis and curved brake lever,improves grip and confidence on choppy surfaces and descents Raised hood head prevents hand misalignment and slippage Recessed finger notch prevents upward slipping Anti-slip texture and brake lever coating gives higher braking efficiency and reduces fatigue on long rides 11-speed E-tube Di2 compatible Levers are supplied without electrical cables, as these need to be ordered separately to suit Kit contains bled ST-RX815 STI, BR-RX810 flat mount brake calliper with pads, hose and mineral oil (without rotor or adapter)
With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear Simply pressing tactile buttons allows effortless and comfortable shifting even when your hands are cold Shifters are lightweight thanks to carbon fibre lever blades, carbon composite bracket body, and a titanium clamp band / fixing bolt Drop bar STI with shift buttons located in a near identical place to the positions you'd assume shifting using a mechanical Shimano STI Servo Wave brake lever pivot is positioned to be used with super SLR brake callipers, increase power providing excellent ergonomics when riding on the hoods Finely tuneable reach adjusters for the levers enable custom fitment for all hands Wired connection to the front and rear derailleurs with SD300 series wires
With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear Simply pressing tactile buttons allows effortless and comfortable shifting even when your hands are cold Shifters are lightweight thanks to carbon fibre lever blades, carbon composite bracket body, and a titanium clamp band / fixing bolt Drop bar STI with shift buttons located in a near identical place to the positions you'd assume shifting using a mechanical Shimano STI Servo Wave brake lever pivot is positioned to be used with super SLR brake callipers, increase power providing excellent ergonomics when riding on the hoods Finely tuneable reach adjusters for the levers enable custom fitment for all hands Wired connection to the front and rear derailleurs with SD300 series wires
Precision-engineered high performance Dura-Ace hydraulic disc brake STI's give you control, modulation and power with minimal effort in all riding conditions Dura-Ace R9100 STI are lightweight thanks to carbon fibre lever blades, carbon composite bracket body, and a titanium clamp band / fixing bolt Hydraulic brake lever provides excellent stopping power with less effort especially from the hood position Hydraulic reservoir tank provides pad to rotor clearance auto-adjust maintaining braking performance during pad wear Shift cables routed under the bar tape using Polymer coated inner wires make for a smooth shift action, providing faster, lighter shifting Vivid Index shifting with short stroke to the release levers gives a quick and accurate shift Gear shift cables can either be routed round the front or rear of the handlebar to suit all rider preferences Ergonomic shift arc follows natural hand movement with inward shift stroke distance reduced for rapid and precise gear changes Small volume ergonomically designed smooth lever hoods for added comfort Finely tuneable reach adjusters for the levers enable custom fitment for all hands Free stroke adjustment for pad to rotor contact setting Kit contains left hand bled ST-R9120 STI, BR-R9170 flat mount brake calliper with pads, hoses and mineral oil (without rotors or adapters) Weight: 505 grams per set