Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Featuring a durable gold anodised finish, this bottom bracket offers increased protection against wear and corrosion. This makes it suitable for all-weather and terrain conditions, while it delivers a smooth rotative performance. It includes left and right-hand cups, spacers, an inner cover, and inner O-rings. Manufacturer's Part Numbers: 68/73mm Option: BB80B 83mm Option: BB80D
Shimano Saint BB80 Hollowtech II Bottom BracketThe Shimano BB80 MTB threaded Bottom bracket is designed to work with Hollowtech II cranks and with BSA BB shells. It's available in two options, one for the 68/73mm width shells on all-mountain and enduro bikes and one for the wider 83mm wide type on downhill bikes.Features: Type: External BSA (English) thread Length of screw thread is increased to enable the fitment of chain devices Set includes left and right hand cups, spacers, inner cover, and inner O-rings Light weight seal structure helps to remove vital grams Sealed cups keep out dirt and water Maintenance free Durable gold anodised finish Easy installation Weight: 68/73mm Option: 95g; 83mm Option: 96gManufacturer Reference Code: 68/73mm Option: BB80B 83mm Option: BB80DA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano MT401 Disc BrakeTailored for mountain bike (MTB) riding, the Shimano MT401 Disc Brake features a sleek design that uses a two-finger lever and a two-piston caliper to deliver quick and intuitive hydraulic braking performance. This MTB hydraulic disc brake includes a BL-MT401 Shimano hydraulic disc brake lever and a BR-MT400 Shimano two-piston hydraulic disc brake caliper.BL-MT401 Shimano Hydraulic Disc Brake LeverAll set for hitting your local trails, this MTB disc brake comes equipped with a durable alloy brake lever for fantastic strength as you navigate across the mountain. Shimano has also kitted out this model with an anodised finish for extra protection against corrosion during wetter riding conditions. Another highlight is its accessible lever reach that's designed for small hands and can easily be adjusted (minimum reach 75mm). This makes it easy to pull and control using its two-finger sized lever blade. Coming complete with a funnel bleeding design with Shimano hydraulic mineral oil compatibility, this is a great choice for long-lasting braking performance as well as easy, quick and clean installation.MTB Disc Brake with Reach AdjustThis model's brake lever is equipped with a reach adjust mechanism. The distance from handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences.BR-MT400 Shimano Two-Piston Hydraulic Disc Brake CaliperThe Shimano MT400 hydraulic disc brake caliper delivers long-lasting performance and quick, easy installation and adjustment. It features a post mount type and uses its two-piston design to provide balanced braking power that's specially tailored for MTB riding.Features: Brake Lever Material: Alloy with Anodised finish Brake Type: Hydraulic disc brake Use: Mountain Bike (MTB) Brake Pads Included: Yes Brake Rotor Included: No, available separately Brake Lever Size: Two finger Minimum Reach: 75mm Funnel Bleeding: Yes Oil: Shimano Mineral Oil Tooled Reach Adjust: Yes; Hose Joint: Straight Caliper Included: BR-MT400, 2-piston, post-mount, One Way Bleeding Single or Pair: Single Manufacturer's Part Numbers: Black 1300mm Rear-RH: MT4012KGRURX130; Black 1650mm Rear-RH: MT4012KGRURX165A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano XT M8025 Direct Mount Front DerailleurThis mech is specifically designed for modern suspension bikes where the rear chainstays can sometimes get in the way of front mech shifting. Shimano has designed this model to offer increased shifting and keep a low enough profile to not foul the bike frame.Features: Swing Action: Down Swing Cassette Compatibility: 11 Maximum Capacity: Total capacity 10T Cable Routing: Dual pull Chain Line: Specifically developed for 68 and 73 mm bottom bracket shells with a 48.8 mm chain line Chain Line Exceptions: Can be used on frames designed for +3mm chain lineOuter Chainring Compatibility: 34 - 38 ToothChainstay Angle: 66-69°A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano M4100 Deore 10Sp Double Front DerailleurBringing even more adventure to your outdoor lifestyle, this front mech offers improved chain stability and sharp shifting on the trails. It features a robust alloy construction with a reinforced steel chain guide, which makes it more than ready for any off-road ride. Designed with modern trail bikes in mind, Shimano has equipped this model with Side Swing technology, which increases tyre clearance while its cable routing results in the lightest shifting action yet.Features: Front Mech Material: Alloy Chain Guide Material: Reinforced Steel Use: MTB Speed: 10 speed Mounting Options: Direct mount, E-type and Low Clamp options available to select Chainline: Chainline both 48.8/51.8mmMax Chainring: For double 38 tooth max chainringPivot Link: Wide pivot link designCable Routing: Side pull cable routing Single or Pair: Single Part Number: Direct Mount: FDM4100D4; E-Type: FDM4100E4; Low Clamp: FDM4100MX4Technologies: Side Swing: Side swing, side pull front derailleur decrease problems with tyre clearance and reduces cable friction. Designed specifically with modern trail bikes in mind, Shimano side swing technology front derailleurs increases tyre clearance, while cable routing resulting in the lightest shifting action yet. Wide Pivot Link: Wide pivot link design for greater torsional rigidity improves shifting response and service life.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Tiagra 4601 10 Speed ChainLightweight and durable, this Tiagra 10 speed road bike chain will help your gears to shift cleanly and reliably. It’s suitable for use on both Shimano and SRAM 10 speed road drivetrains.Features: Discipline: Road Speed: 10 Speed Compatible Compatibility: Shimano/SRAM Links: 116 Adjustable: No Quicklink: No Joining Pin Provided: Yes Weight: 273gA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano 1055800/SLX M7000 HG601Q 11 Speed ChainThe symmetrical design of the Shimano 11 Speed Chain makes it super lightweight and narrow making it the perfect addition to your bike. Helping you reach the next level, the 11 Speed Chain has been created to be compatible with Shimano 11 speed Dyna-Sys systems. It is also stong and durable to give you the smoothest shifting during even the most challenging rides. Features:Outer plate design has been developed to reduce the chance of chain suckSil-Tec surface treatment technology (PTFE plating) on inner links that is smooth running and increases durabilityThe inner plate has been developed for better contact with gears providing smoother shifting under high load, giving efficient pedalling, increased rigidity and near silent runningUse: Road and MTBChain Width: 5.62mmOptimised for: 11-speed Super Narrow HG-EV drivetrainsAverage Weight: 257 gramsA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano E6000 Single E-MTB Chain RingThis stunning chainring is specifically designed for E-bike use as it offers amazing smoothness as you cruise from the city streets to the countryside. It features a robust steel construction which makes it more than capable of handling the increased speeds and torque levels produced by electronic drive units. Ready for giving you an extra push on your commute to work or taking you around town with your buddies, this is an excellent model for a reliable gearing experience. Features: Material: Steel Use: E-bike Speed: 11 speed Compatibility: Shimano STePs E6000 drive units Tooth: 34TA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano HG400 9 Speed MTB CassetteRejuvenate your 9 speed mountain bike (MTB) set up with the HG400 9-speed Cassette. With gear ratios to suit all wheel sizes and contoured shift gates for responsive and smooth shifting, this is an ideal all-around MTB cassette. Designed for use with Super Narrow 9-speed HG chains Shimano has given it a nickel-plated finish for enhanced corrosion resistance and to increase its durability.Features: Speed: 9-Speed Compatibility: All Shimano and SRAM 9-Speed MTB drivetrains Freehub Compatibility: Standard Hyperglide 9/10/11-Speed Shimano-style freehubs Chain Compatibility: Super Narrow 9-speed HG chains recommended Use: MTB, Hybrid, Touring bikes Hyperglide sprockets have a computer designed tooth configuration with contoured shift gates, resulting in a crisp smooth shift even under load Close ratio gearing allows more efficient use of energy through finer cadence controlSprockets are cut away and drilled to reduce weight without reducing rigidityNickel-plated finish offers hard wearing resistance to corrosionCorrosion-resistant steel cassette lockring Manufacturer's Part Number: CS-HG400-9A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapter EW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cables Reliable and secure water resistant connectors