Shimano SPD Cleats (SH56)With their simple yet effective design, the Shimano SH56 SPD cleats quickly engage and disengage from all SPD compatible road or mountain bike pedals. To connect, simply stand your foot down into the pedal, to release, you just twist your foot left or right. Plus, should you happen to forget to release your foot as you're coming to a stop, you can release your foot with some hard, upward force. This prevents you from falling over with both feet still engaged and removes the risk of an unpleasant injury.Reasons to Buy: Simple yet effective design. Quick and easy engagement and disengagement. Suitable for all SPD road and MTB pedals. Features: Cleat releases easily by twisting in either direction Designed to work with all open design SPD type pedals Pack of two cleats Note: Cleats are not supplied with cleat plateA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Di2 EW90 Junction-A Box (3 Port)Say goodbye to poor shifting control, thanks to the Junction-A Box from Shimano. Mounting seamlessly to your bike stem, thanks to the mounting strap included, it connects with E-Tube wires from D12 shifters and a downtube junction wire.Features:This junction A is required to connect the shifters via E-tube wires to the downtube junction wire3-port design, one for downtube wire to bottom bracket junction, two for shifter connectionBattery level indicator featureE-tube EW-SD50 wires not includedAdditional charging point when using the internal batteryGear index setup switch to allow fine-tuning via shifter buttonsReliable and secure water-resistant connectorsStem mounting strap includedCompatible Systems: E-TubeWeight: 10g (approx.)Part No: SM-EW90-AA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Di2 BCR2 Charger for BTR2 BatteryAn essential component for maintaining your Shimano Di2 electronic drivetrain system, the Di2 BCR2 Charger is compatible with Shimano’s SM-BTR2, BT-DN110 internal batteries. Simple to use, it connects your Di2’s handlebar junction, so there is no need to remove the battery from the bike for charging. This charger can also be connected to your PC via USB for software updates and customisation.Features: Battery charger for SM-BTR2, BT-DN110 and BT-DN110-A Di2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger 1.5 hour charge time Includes SM-BCR2 charging cable Plugs in directly to the SM-EW90 handlebar junction A PC linkage device for E-Tube Project to update firmware and customize settings Plug lead not includedA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano E-Tube Di2 Junction Box The Shimano Di2 SM-JC41 internal junction box is the Grand Central Station of the e-tube Di2 system. All of the component and battery wires meet here before running out to their respective components. All of the wires that connect to the junction box use the same connector to make assembly that much easier.Features:SM-JC41 cable junction for internal wire routing.Junction is required for connection of rear mech, front mech, battery, and cable to battery indicator junction box.To be positioned neatly inside frame tubing when connected.Cables sold separately.Reliable and secure water resistant connectors.This junction box is only made to be mounted internally on frames specially designed for an internally routed system.A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano E-Tube Di2 Junction Box The Shimano Di2 SM-JC41 internal junction box is the Grand Central Station of the e-tube Di2 system. All of the component and battery wires meet here before running out to their respective components. All of the wires that connect to the junction box use the same connector to make assembly that much easier.Features:SM-JC41 cable junction for internal wire routing.Junction is required for connection of rear mech, front mech, battery, and cable to battery indicator junction box.To be positioned neatly inside frame tubing when connected.Cables sold separately.Reliable and secure water resistant connectors.This junction box is only made to be mounted internally on frames specially designed for an internally routed system.A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano SD50 Di2 Electric WireEliminate poor gear shifting performance caused by corrosion and stretching, thanks to these electric wire cables from Shimano. Providing exceptional protection from the elements, this electric wire ensures seamless gear shifting for an overall enhanced performance when cycling. Features:Ultegra Di2 uses a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitmentEW-SD50 wires are required to connect the junction (either SM-JC40 external or SM-JC41 internal to the rear mech, front mech, battery and to the handlebar battery indicator junction boxEW-SD50 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water-resistant connectorsA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano MTB Stainless Steel Gear Cable SetWhether you're putting together a new build or simply servicing your trusty rig, everything you need is in Shimano's MTB Stainless Steel Gear Cable Set. Fitting new gears or completely overhauling your gear cabling couldn't be easier with this MTB gear cable set.Features:Stainless steel precision ground round inner wire leaves a smooth surface for low friction while providing high corrosion resistanceOuter casing is lubricated internally along its length with low-friction silicone grease to reduce cable frictionSpecial construction process makes for an axially stiff outer casing that transmits shifting movements accurately and quicklyOuter casing is lined with a polymer sheath to assist with the smooth operation of the inner wireIncludes: 1.2mm inner wires (1x 2,100mm, 1x 1,800mm), and black 4mm SP41 outer casing for a complete bike (1x 3,000mm), and sealed outer caps one with added tongue for rubber shield plus inner end capsA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Di2 BCR1 ChargerDi2 charger for the external battery that will keep your Di2 system shifting. Features:Di2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger1.5 hour charge timePlug not includedA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Dura-Ace/Ultegra Di2 BTR1 Battery The power house of Shimano Di2 is a long-life 7.4V Li-Ion battery that is both compact and reliable, taking shifting effort away from you. Excellent sealing and reliability have been proven through repeated field tests in various riding conditions, including extreme temperatures, rain, mud, and cobble stone roads Features: Using a hard wired battery system which is both light weight and accurate compared to current wireless technology (as a wireless system would require 4 batteries: one for the RD, one for the FD, and one for each shift lever) The use of a single small and discreet battery is light weight, efficient and creates a robust and reliable system One charge can give between 1000 and 2000 kilometre range depending on conditions and front mech operation (as this is the main power drain) 500 times rechargeable life Optional battery mount adapter is available if standard mount is not compatible Reliable and secure water resistant terminals Easily removable for charging Weight: 68 gramsA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Gear Cable Tongue/Shield KitTongue and shield kit from Shimano.Features:Comes in a 4 packFor all gear cablesA 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano MTB-Road Inner Gear CableThese Inner Gear Cables for Shimano Mountain Bike & Road bikes are designed to be compatible with Deore XT gears.Features:Size: 1.2mm x 2100mmCompatible: Deore XT A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano EC300 Di2 Charging CableThe EC300 Di2 Charging Cable is a USB charging cable for use with Shimano Dura-Ace R9200 Series 12-Speed Di2 electronic drivetrain systems. And it's 1.7metres in length for easy and convenient connection to the rear derailleur.The new EC300 charging connector is designed specifically for Shimano's 12-speed Di2 road drivetrains. Charging of the new Shimano 12-speed Di2 road drivetrains is now accomplished with the EC300 charger cord. Attached to the rear derailleur, this new cord is less expensive than previous chargers and can also be used to charge Shimano power meters. Features: Charging connector for RD-R9250 and FC-R9200-P Series: Dura-Ace R9200 Series Compatible with charging FC-R9200-P 1.7 m cable length Shimano Part Number: EW-EC300A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.