Wide link Shadow design Dyna-Sys 10-speed top normal Deore rear derailleur Shadow Plus features a super low profile design that reduces the risk of damage from trail side hazards Shadow Plus uses a chain stabilising switch that when on will reduce chain bounce in rough terrain Direct Mount compatible Rear Derailleur system gives more space around the rear frame dropout resulting in easier rear wheel removal but also allows frame designers to shorten chain stays, increase axle sizes and move suspension pivots Single tension spring prevents contact with the chainstay resulting in a silent ride Direct cable routing prevents snagging from any trail side hazards Alloy and steel construction leads to lower weight without compromising strength and durability Wide link design increases rigidity and service life Top normal return spring lends to incredibly intuitive operation when combined with Rapidfire shifters Large 11 tooth pulleys are used for longer life Two fluorine-coated link bushings for low-friction operation Dyna-Sys HG-X 10-speed compatible only Compatible with 32-36T low sprocket
Key Features:Great value Alivio rear derailleur offering crisp performance on- and off-road for 9-speed drivetrains,Wide link design increases rigidity and service life,Alloy body and outer link leads to lower weight without compromising strength and durability,11-tooth pulleys for reduced pulley wear and chain noise,Advanced light action design with low friction fluorine coated link pivot bushings,For use with 28 to 34 tooth low rear sprockets, total capacity 45 teeth,Top-normal swing design,Compatible with 9-speed Hyperglide sprockets.
Hope's Slick Guide Short is a super lightweight, high adjustable chain guide that is perfect for the latest breed of lightweight and aggressive trail and enduro bikes. In typical Hope style the Slick Guide Short is CNC machined, beautifully finished and engineered to do the job with minimal fuss.Super stiff & lightweight CNC machined aluminium back plate & engineering plastic cageEasily installed without removing the crank with single tool installation & adjustmentCompatible with ISCG05 mounts and fits 28 36t chainringsLightweight & durable stainless steel & aluminium hardwareIncredibly light at 65gPlease check frame clearance before ordering this item, as it is not compatible with some full suspension designs, including Yeti's Switch Infinity SystemThe Slick Guide is designed with lightweight and durability in mind, two words that don't often go hand in hand. The Slick Guide features a lightweight CNC machined 700 series aluminium back plate that is super stiff and strong, while being extremely light. The cage is also CNC machined, but this time from engineering plastic, which is durable and helps the slick guide to run smoothly and quietly. The Slick Guide is incredibly easy to install, with just one tool needed for installation and adjustment while the design of the back plate means the guide can be fitted without removing the cranks, so it can installed and perfectly adjusted in seconds. At just 65g the Slick Guide is lightweight and will be barely noticeable on the bike, while offering perfect chain retention over rough terrain and descents. Slick by name and slick by nature, the Hope Slick Guide Shorty is the perfect finishing touch to any trail or enduro bike.
Hope's Slick Guide Short is a super lightweight, high adjustable chain guide that is perfect for the latest breed of lightweight and aggressive trail and enduro bikes. In typical Hope style the Slick Guide Short is CNC machined, beautifully finished and engineered to do the job with minimal fuss.Super stiff & lightweight CNC machined aluminium back plate & engineering plastic cageEasily installed without removing the crank with single tool installation & adjustmentCompatible with ISCG05 mounts and fits 28 36t chainringsLightweight & durable stainless steel & aluminium hardwareIncredibly light at 65gPlease check frame clearance before ordering this item, as it is not compatible with some full suspension designs, including Yeti's Switch Infinity SystemThe Slick Guide is designed with lightweight and durability in mind, two words that don't often go hand in hand. The Slick Guide features a lightweight CNC machined 700 series aluminium back plate that is super stiff and strong, while being extremely light. The cage is also CNC machined, but this time from engineering plastic, which is durable and helps the slick guide to run smoothly and quietly. The Slick Guide is incredibly easy to install, with just one tool needed for installation and adjustment while the design of the back plate means the guide can be fitted without removing the cranks, so it can installed and perfectly adjusted in seconds. At just 65g the Slick Guide is lightweight and will be barely noticeable on the bike, while offering perfect chain retention over rough terrain and descents. Slick by name and slick by nature, the Hope Slick Guide Shorty is the perfect finishing touch to any trail or enduro bike.
Hope's Slick Guide Short is a super lightweight, high adjustable chain guide that is perfect for the latest breed of lightweight and aggressive trail and enduro bikes. In typical Hope style the Slick Guide Short is CNC machined, beautifully finished and engineered to do the job with minimal fuss.Super stiff & lightweight CNC machined aluminium back plate & engineering plastic cageEasily installed without removing the crank with single tool installation & adjustmentCompatible with ISCG05 mounts and fits 28 36t chainringsLightweight & durable stainless steel & aluminium hardwareIncredibly light at 65gPlease check frame clearance before ordering this item, as it is not compatible with some full suspension designs, including Yeti's Switch Infinity SystemThe Slick Guide is designed with lightweight and durability in mind, two words that don't often go hand in hand. The Slick Guide features a lightweight CNC machined 700 series aluminium back plate that is super stiff and strong, while being extremely light. The cage is also CNC machined, but this time from engineering plastic, which is durable and helps the slick guide to run smoothly and quietly. The Slick Guide is incredibly easy to install, with just one tool needed for installation and adjustment while the design of the back plate means the guide can be fitted without removing the cranks, so it can installed and perfectly adjusted in seconds. At just 65g the Slick Guide is lightweight and will be barely noticeable on the bike, while offering perfect chain retention over rough terrain and descents. Slick by name and slick by nature, the Hope Slick Guide Shorty is the perfect finishing touch to any trail or enduro bike.
Hope's Slick Guide Short is a super lightweight, high adjustable chain guide that is perfect for the latest breed of lightweight and aggressive trail and enduro bikes. In typical Hope style the Slick Guide Short is CNC machined, beautifully finished and engineered to do the job with minimal fuss.Super stiff & lightweight CNC machined aluminium back plate & engineering plastic cageEasily installed without removing the crank with single tool installation & adjustmentCompatible with ISCG05 mounts and fits 28 36t chainringsLightweight & durable stainless steel & aluminium hardwareIncredibly light at 65gPlease check frame clearance before ordering this item, as it is not compatible with some full suspension designs, including Yeti's Switch Infinity SystemThe Slick Guide is designed with lightweight and durability in mind, two words that don't often go hand in hand. The Slick Guide features a lightweight CNC machined 700 series aluminium back plate that is super stiff and strong, while being extremely light. The cage is also CNC machined, but this time from engineering plastic, which is durable and helps the slick guide to run smoothly and quietly. The Slick Guide is incredibly easy to install, with just one tool needed for installation and adjustment while the design of the back plate means the guide can be fitted without removing the cranks, so it can installed and perfectly adjusted in seconds. At just 65g the Slick Guide is lightweight and will be barely noticeable on the bike, while offering perfect chain retention over rough terrain and descents. Slick by name and slick by nature, the Hope Slick Guide Shorty is the perfect finishing touch to any trail or enduro bike.
Hope's Slick Guide Short is a super lightweight, high adjustable chain guide that is perfect for the latest breed of lightweight and aggressive trail and enduro bikes. In typical Hope style the Slick Guide Short is CNC machined, beautifully finished and engineered to do the job with minimal fuss.Super stiff & lightweight CNC machined aluminium back plate & engineering plastic cageEasily installed without removing the crank with single tool installation & adjustmentCompatible with ISCG05 mounts and fits 28 36t chainringsLightweight & durable stainless steel & aluminium hardwareIncredibly light at 65gPlease check frame clearance before ordering this item, as it is not compatible with some full suspension designs, including Yeti's Switch Infinity SystemThe Slick Guide is designed with lightweight and durability in mind, two words that don't often go hand in hand. The Slick Guide features a lightweight CNC machined 700 series aluminium back plate that is super stiff and strong, while being extremely light. The cage is also CNC machined, but this time from engineering plastic, which is durable and helps the slick guide to run smoothly and quietly. The Slick Guide is incredibly easy to install, with just one tool needed for installation and adjustment while the design of the back plate means the guide can be fitted without removing the cranks, so it can installed and perfectly adjusted in seconds. At just 65g the Slick Guide is lightweight and will be barely noticeable on the bike, while offering perfect chain retention over rough terrain and descents. Slick by name and slick by nature, the Hope Slick Guide Shorty is the perfect finishing touch to any trail or enduro bike.
The all-new Shimano Deore M6100 rear derailleurs deliver advanced shifting performance with decreased tension in the low gear position. Larger 13T pulleys increase efficiency and chain management while compatibility with Shimano's new 12-speed cassettes boosts range.Deore M6100 Shadow plus 12-speed rear derailleur for dependable shifting performance and durabilityShadow plus features a super low profile design and optimized slant angle for super light shifting actionShadow Plus uses a chain stabilising switch that when on will reduce chain bounce in rough terrain maintaining more stable drive and shiftingSingle tension spring prevents contact with the chainstay resulting in a silent ride13T pulleys and decreased derailleur tension prevent high chain tension in low gearsDirect cable routing prevents snagging from any trail side hazardsCold forged wide alloy links and pivot bodyFluorine-coated link pin bushingsStrong return spring for a positive shifting feelDurable 13T bearing pulleys for low frictionTop normal spring uses the spring to select higher gearsMax low sprocket: 51T (1x 12-speed)41T capacity SGS cage
The M7100 SLX series of derailleurs deliver advanced shifting performance with decreased tension in the low gear position and an added bumper on the pulley cage. Larger 13T pulleys increase efficiency and chain management while compatibility with Shimano's new 12-speed cassettes boosts range.SLX Shadow plus 12-speed double rear derailleur for the ultimate in shifting performance and durabilityShadow plus features a super low-profile design and optimized slant angle for super light shifting actionShadow Plus uses a chain stabilising switch that when on will reduce chain bounce in rough terrain maintaining more stable drive and shiftingSingle tension spring prevents contact with the chain stay resulting in a silent rideRubber bumper on pulley cage for added silent drive13T pulleys and decreased derailleur tension prevent high chain tension in low gearsDirect cable routing prevents snagging from any trail side hazardsFull carbon fibre outer pulley cage saves weight while alloy inner cage increases rigidityCold forged wide alloy links and pivot bodyFour fluorine-coated link pin bushingsStrong return spring for a positive shifting feelSpecifically designed to work with XTR M9100 12-speed double drivetrainsDurable sealed 13T bearing pulleys for low frictionTop normal spring uses the spring to select higher gearsMax front difference 10TMax low sprocket: 45T (2x 12-speed)41T capacity SGS cageAverage weight 241g
The SLX M7100 series of derailleurs deliver advanced shifting performance with decreased tension in the low gear position and an added bumper on the pulley cage. Advanced shifting performance provides the confidence to enjoy any trailLow-profile designExtra wide range 12-speed drivetrain -10-51T (12-speed) -10-45T(12-speed)Decreased rear derailleur and chain tension in low gearNew bumper added to rear derailleur pulley cageBigger 13T pulleyShimano have pulled out all the stops to provide you with a derailleur that provides super smooth shifting performance that s fast and without any nasty shocks or noises. The larger 13T pulleys increase efficiency and chain management while compatibility with SHIMANO's new 12-speed cassettes boosts the range of gears you can now benefit from.
The RD-M786 rear derailleur with Shadow technology is optimised for trail riding with the addition of an innovative new friction clutch mechanism which actively prevents the derailleur cage moving forwards under tension, all but eliminating chain slap and helping to prevent chain suck and dropping, ideal for more aggressive trail riders. The tension can be removed with the used of an integrated lever which facilitates easy wheel removal and gear indexing.The familiar 'Shadow' low profile design architecture keeps the derailleur and it's pulley cage closely tucked in to prevent impact damage from trail hazards whilst also eliminating chainstay contact and trail chatter, similarly the direct cable routing prevents snagging. Whilst a modified cable pull-ratio (which requires the same pressure regardless of the position on the cassette) helps resist the effects of cable contamination to maintain shift quality for longer.
The Shimano Deore XT M8000 rear derailleur Delivers reliable and precise shifting with a stiff and lightweight open design. Its Shadow design has a slant angle that’s been optimised for use with larger sprockets and the cage features a super low profile design that reduces the risk of damage. The Shadow Plus system uses a chain stabilising switch that when on, reduces chain bounce in rough terrain maintaining a more stable drive and reliable shifting. This can be switched off to remove the wheel. The Direct Mount system on the Shimano Deore XT M8000 rear derailleur 11 Speed model gives you more space around the rear frame dropout. This results in easier rear wheel removal but also allows frame designers to shorten chain stays, increase axle sizes and move suspension pivots.