The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra-compact headlight. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it’s USB Rechargeable, making it the perfect light of choice for commuters and cycling enthusiasts. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility in both day and night. Swift Features: Lumen Output: 500 5 Modes with Run Times: 1:40 – 32:00hrs Charge Time: 1:45 / 3:00hrs Weight: 82g Battery: Li-Po Low Battery Indicator 500 lumen super compact and bright taillight Water / Dust Resistant IP64 Rated Swift Run Times: Low - 10:00h at 150 Lumens Med - 3:40h at 250 Lumens High - 1:40h at 500 Lumens Flash - 12:30h at 500 Lumens Walk - 32:00h at 30 Lumens Sabre Features: Lumen Output: 110 6 Modes with Run Times: 1:30 – 10:30hrs Charge Time: 2:30hrs Weight: 28g Battery: Li-Po Low Battery Indicator 110 Lumen Super Lightweight Daylight Visible taillight Sabre Run Times: Pulse Flash - 7:00h Flash - 6:00h Fast Flash - 17:00h Steady High - 1:45h Steady Med - 4:00h Steady Low - 8:30h
In addition to the Warhead cup’s high-quality manufacture for the perfect fit into your frame, the cups come with fully sealed cartridge bearings, which are easily replaceable. There is also the option of upgrading to higher quality Nukeproof ceramic bearings. These individually sold bottom headset cups are available in both internal and external types for both standard and tapered steerer tubes, enabling you to choose the exact setup to suit your frame and fork's sizing standards. This simplifies the process of upgrading forks or completing a new bike build. The cups are constructed from a CNC machined, proprietary aluminium and offer the optimum balance of strength, durability and a low weight. They include split alloy crown races for easy installation and the 1.5” versions can be easily adapted to work with alternative fork steerer types with the addition of the 1 1/8" to 1.5" crown race adaptor (reducer) if required (sold separately).
In addition to the Warhead cup’s high-quality manufacture for the perfect fit into your frame, the cups come with fully sealed cartridge bearings, which are easily replaceable. There is also the option of upgrading to higher quality Nukeproof ceramic bearings. These individually sold top headset cups are available in both internal and external types for both standard and tapered steerer tubes, which enables you to choose the exact setup to suit your frame and fork's sizing standards. This simplifies the process of upgrading forks or completing a new bike build. The cups are constructed from a CNC machined, proprietary aluminium and offer the optimum balance of strength, durability and a low weight.
The bearing is ABEC 5 certified which means that it has passed tests which include ID and OD tolerance’s, roundness of ball, trueness of faces & surfaces as well as noise testing at high RPM. These bearings have been designed and tested for the harshest of UK winters so if you want bearings that won’t let you down then these are the ones to get. These headsets have been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, split alloy crown races and upper and lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength and durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics. Nukeproof are so confident in the performance of these bearings that they are offering a 5 year warranty so you can be rest assured your purchase will be a good one. Click here to view and download our Nukeproof Headset Technical Manual. Model Headtube Internal Diameter Steerer Black 1.1/8" EX34-30 - B1 34mm 1 1/8" Black 1.1/8" EX44-40 - B5 44mm 1.5" Black 1.5" EX49-40 - B7 49mm 1.5" Black 1.5" ZS56-40 - B8 56mm 1.5"
The bearing is ABEC 5 certified which means that it has passed tests which include ID and OD tolerance’s, roundness of ball, trueness of faces & surfaces as well as noise testing at high RPM. These bearings have been designed and tested for the harshest of UK winters so if you want bearings that won’t let you down then these are the ones to get. Works with all Nukeproof headsets from 2015 onwards. For fitting instructions click here.
The bearing is ABEC 5 certified which means that it has passed tests which include ID and OD tolerance’s, roundness of ball, trueness of faces & surfaces as well as noise testing at high RPM. These bearings have been designed and tested for the harshest of UK winters so if you want bearings that won’t let you down then these are the ones to get. These headsets have been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, split alloy crown races and upper and lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength and durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics. A top cap and star nut are also included. Nukeproof are so confident in the performance of these bearings that they are offering a 5 year warranty so you can be rest assured your purchase will be a good one. Click here to view and download our Nukeproof Headset Technical Manual. Model Headtube Internal Diameter Steerer Black EX34-28.6 - T1 1.1/8" Top Cap Included 34mm 1 1/8" Black ZS44-28.6 - T2 1.1/8" Top Cap Included 44mm 1 1/8" Black ZS49-28.6 - T3 1.1/8" Top Cap Included 49mm 1 1/8"
This high-quality construction ensures they can cope with the demands of elite-level downhill riding. Black with laser-etched graphics for a clean and bold look, the Turbine spacers are available in a wide range of sizes to help you to obtain the perfect handlebar height.
This pair of Nukeproof Horizon V2 wheels comes equipped with the brand's extensively trailed and tested alloy blend, which includes a rim construction that's specifically made to meet the demands of both enduro and downhill (DH) riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this wheelset gives you the best of both worlds in terms of strength, stiffness and weight. Both rims have the same profile, but the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this wheelset. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time penetrating. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 Hub The Nukeproof Horizon V2 rear hub has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future. The 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with its louder pawls and springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included? Wheels come taped with a tubeless valve installed, so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in. A pair of ARD inserts are also supplied to give you maximum protection and there is a 500ml bottle of lifeline sealant in the box too, all you need to do is add your favourite tyres. By using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you a much-increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split. Additional Item Top Features: Conversion Options: 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD (choose freehub option from the menu) Rear Hub Engagement: 102 points of engagement (every 3.52°) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Supplied with: Pair of wheels, valves, pre-taped, pair of ARD tyre inserts, 500ml bottle of Lifeline sealant A full range of spares are available to service your hub in the future. 141mm rear conversion kit for HG / XD freehubs available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR Manufacturer's Part Numbers: NUKHOR2021BF29HG Black HG 29" NUKHOR2021BF29XD Black XD 29" NUKHOR2021BF29MS Black MS 29" NUKHOR2021BF275HG Black HG 27.5" NUKHOR2021BF275XD Black XD 27.5" NUKHOR2021BF275MS Black MS 27.5"
This Nukeproof top headset assembly is compatible with the bearings from the Nukeproof Steel Bearing or the upgraded Nukeproof Ti coated bearing with stainless balls. Designed to ensure the highest performance for tough and challenging conditions, this model has been engineered with durability and quality in mind. The latest generation of headsets has been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, this upper bearing cup which is CNC-machined from proprietary aluminium offers the optimum balance of lightweight, strength and durability for performance across all riding disciplines. Nukeproof has also kitted it out with a hard anodised finish and laser-etched graphics for maximum toughness as well as a sleek appearance. Don't know which headset you need? No problem! Simply use our Headset Technical Guide which includes a Headset Finder. If you need a top cap and star nut, this can be purchased here.
The Nukeproof Neutron Top headset has been designed and developed for modern E-bikes. E-bikes are now more versatile and capable of being ridden harder for longer in all conditions. To keep up with increasing demands placed upon E-Bike headsets, Nukeproof has produced and engineered an E-Bike headset that is durable and longer lasting. The Neutron E-Bike headset is an alloy construction with no plastic parts in vulnerable high-stress areas, using a steel cartridge bearing, offering a robust and reliable package. A protection sleeve is supplied to minimise internal cable rub on your forks steerer tube. The top cover entry points for cables are bunged to reduce water and dirt ingress, this will help prolong the bearing's service life. Install Guide can be found here.
To keep up with increasing demands placed upon E-Bike headsets, Nukeproof has produced and engineered an E-Bike headset that is durable and longer lasting. The Neutron E-Bike headset is an alloy construction with no plastic parts in vulnerable high-stress areas, using a steel cartridge bearing, offering a robust and reliable package. With an inbuilt bump stop, the headset is designed to protect the cables in the event of a crash by stopping the bars from spinning too far. The headset is designed to meet modern E-Bike standard fitting with a ZS66 diameter with crown race options for 1.5’’ and 1.8’’ steerer forks. Install Guide can be found here.
These high-quality bearings are designed specifically for use in high-stress locations such as frame pivot points and they are sealed to protect them from the elements. The kit contains 4x 6901, 2x 6902, 4x 6800 bearings. This kit will fit the Alloy and Carbon Reactor bikes.