This official Hope caliper cap tool is designed to take off the gold cap on the outside of the caliper which holds the piston in place.
The ABEC3 6001 LLB raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
The ABEC3 6000 LLU Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: LLU Seals: Two NBR 70 rubber seals with medium/high contact seal, which rides in a matching groove machined into the bearing to make a labyrinth type seal. The outer sealing lip repels dirt and water while the inner sealing lip retains the grease. CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.
The ABEC3 6903 LLB raises the bar for military standard, high precision bearings. Only the finest cycling components come standard with this model, featuring hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are immensely durable and the ideal low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
The ABEC3 6801 LLB raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
The ABEC3 MR 15267 LLB raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
The SS 6902 2RS Bearing raises the bar for military standard, high precision bearings. Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races. Technologies: 2RS: Literally means the bearing has Two Rubber Seals. There are many types of seals. On most other bearings 2RS means that the seal is made from rubber and has one sealing lip rubbing on any flat part of the inner race. Enduro’s seals are usually either LLU (usually the MAX type bearings) or LLB (better for hubs). Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
The ABEC5 ACB 71806 LLB raises the bar for military standard, high precision bearings. By using high precision HRC-64 hardened Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing. Technologies: Kyodo Yushi PS-2: This grease has a protective interface between ceramic balls and metal races and for it’s high speed properties and minimum rolling resistance. Speed and Protection for high precision bearing systems. LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction.
The unique, wedge-shaped Park Tool Brake Piston Press slides into a hydraulic disc brake caliper to pre-set the piston when replacing pads, aligning pads, and performing other service procedures. Makes hydraulic disc brake maintenance and repair faster and easier.
These superb cranks are Rotor's lightest ever and incorporate OCP Mount Technology, which allows you to fine-tune the orientation of your Oval Q-rings. Additionally, these are an ideal choice of replacement for changing your old or worn-out existing road bike cranks.
Constructed from unidirectional carbon fibre and layered with a toughened ARC covering, each rim provides a rigid and protective performance on every outing. Finley balanced thanks to the 19mm internal width, these rims give as true and consistent a roll as possible as you tear across the tarmac. Fast-Paced, Carbon and Aluminium Road Wheels The front-wheel spins on a carbon hub on the front with an aluminium one on the rear, and both come with oversized aluminium flanges and USB (Ultra Smooth Bearing) ceramic bearings for a silky-smooth rotation. They also help the aluminium aero-shaped straightpull spokes to strengthen the build for the rigours and pressures of such pacy and lengthy riding. Ideal for gravel riding as well as intense road racing, this tubeless-ready duo is made to meet the demands of the modern rider.
LR500 Front Light Featuring the new curved lens optical design, LR500S gives out even-distributed flood light and provides side visibility, great for road cycling and daily commuting. Featuring battery run time extension function, the light could be also used for long-distance bike travel or race. Specifically designed curved lens With special optical modelling and design, the curved lens creates an even-distributed flood light with a suitable beam throw and provides side visibility, great for road cycling and commuting. Plus, you can extend the runtime of the battery by connecting with an external power source for emergency lighting when the light is in low power, no worry to be left in darkness. Multiple Output Settings Three constant brightness levels with high lumens or long run time for different riding environments; a visible rapid flashing for daytime riding to increase your visibility Features: 1. Specifically designed curved lens with even-distributed flood beam and side visibility, great for road cycling and commuting 2. Extending battery runtime by connecting with external power source 3. Wired remote button(sold separately) to change brightness level safely without releasing the grip 4. Multiple brightness levels and daytime visible rapid flashing for night and daytime riding 5. Micro USB charging port, compatible with most phone chargers 6. Integrated self-contained design, compact and light weight 7. Intelligent memory circuit remembers the last used brightness level and mode when turned on again 8. Quick release design for easily slide in and out 9. Compatible with handlebar of 22.2mm to 35mm diameter Specifications: LED: 1*CREE XP-G2 with a lifespan of 50000 hours Battery: 2200mAh/3.7V rechargeable Lithium-ion battery Dimensions (Headlight): 85mm (L)*36mm (W)*30mm (H) Weight (Headlight): 119g Materials: The main body is made by aluminium with Mil Type III Hard Coat Anodizing; the rear part and the handlebar mount are made by durable plastic Design and specifications are subject to change without notice. TR20 Rear Light The Ravemen TR20 USB Rechargeable Rear Light is a super bright, compact and lightweight rear light with a quick-release clamp mount as is suited to daily commuting, road and urban cycling. With only 20 grams of the whole unit and max 20 LED lumens, TR20 is a super-compact, lightweight yet bright rear light. With the quick-release clamp mount, the light is easy to use and convenient for your daily commuting or road cycling, whether mounted on the seatpost or helmet. Rear and Side Visibility Specifically designed lens ensuring your rear and side visibility for maximum safety. Plus, it has a versatile and easy-to-use quick-release mounting clamp system, so it's ready for various mounting situations. Also, you can adjust its angle for the greatest visibility and with USB rechargeability, it can be charged from your computer and is compatible with most phone chargers. Features: 1. Highly efficient COB LED with max 20 LED lumens 2. Quick-release designed for various needs 3. Specifically designed lens providing rear and side visibility 4. Auto power save and indicator for low battery 5. Micro USB charging port, compatible with most phone chargers 6. Built-in battery indicator and charging indicator 7. Intelligent memory circuit remembers the last used brightness level and mode when turned on again Specifications: Dimensions (Headlight): 18mm (L)*22mm (W)*52mm (H) Mount size: compatible with 24-36mm seatpost diameters LED: COB LED Battery: 200mAh/3.7V rechargeable Li-polymer battery Weight (light unit): 15g