This pair of Nukeproof Horizon V2 wheels comes equipped with the brand's extensively trailed and tested alloy blend, which includes a rim construction that's specifically made to meet the demands of both enduro and downhill (DH) riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this wheelset gives you the best of both worlds in terms of strength, stiffness and weight. Both rims have the same profile, but the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this wheelset. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time penetrating. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 Hub The Nukeproof Horizon V2 rear hub has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future. The 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with its louder pawls and springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included? Wheels come taped with a tubeless valve installed, so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in. A pair of ARD inserts are also supplied to give you maximum protection and there is a 500ml bottle of lifeline sealant in the box too, all you need to do is add your favourite tyres. By using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you a much-increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split. Additional Item Top Features: Conversion Options: 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD (choose freehub option from the menu) Rear Hub Engagement: 102 points of engagement (every 3.52°) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Supplied with: Pair of wheels, valves, pre-taped, pair of ARD tyre inserts, 500ml bottle of Lifeline sealant A full range of spares are available to service your hub in the future. 141mm rear conversion kit for HG / XD freehubs available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR Manufacturer's Part Numbers: NUKHOR2021BF29HG Black HG 29" NUKHOR2021BF29XD Black XD 29" NUKHOR2021BF29MS Black MS 29" NUKHOR2021BF275HG Black HG 27.5" NUKHOR2021BF275XD Black XD 27.5" NUKHOR2021BF275MS Black MS 27.5"
This high-quality construction ensures they can cope with the demands of elite-level downhill riding. Black with laser-etched graphics for a clean and bold look, the Turbine spacers are available in a wide range of sizes to help you to obtain the perfect handlebar height.
The bearing is ABEC 5 certified which means that it has passed tests which include ID and OD tolerance’s, roundness of ball, trueness of faces & surfaces as well as noise testing at high RPM. These bearings have been designed and tested for the harshest of UK winters so if you want bearings that won’t let you down then these are the ones to get. These headsets have been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, split alloy crown races and upper and lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength and durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics. A top cap and star nut are also included. Nukeproof are so confident in the performance of these bearings that they are offering a 5 year warranty so you can be rest assured your purchase will be a good one. Click here to view and download our Nukeproof Headset Technical Manual. Model Headtube Internal Diameter Steerer Black EX34-28.6 - T1 1.1/8" Top Cap Included 34mm 1 1/8" Black ZS44-28.6 - T2 1.1/8" Top Cap Included 44mm 1 1/8" Black ZS49-28.6 - T3 1.1/8" Top Cap Included 49mm 1 1/8"
The bearing is ABEC 5 certified which means that it has passed tests which include ID and OD tolerance’s, roundness of ball, trueness of faces & surfaces as well as noise testing at high RPM. These bearings have been designed and tested for the harshest of UK winters so if you want bearings that won’t let you down then these are the ones to get. Works with all Nukeproof headsets from 2015 onwards. For fitting instructions click here.
The bearing is ABEC 5 certified which means that it has passed tests which include ID and OD tolerance’s, roundness of ball, trueness of faces & surfaces as well as noise testing at high RPM. These bearings have been designed and tested for the harshest of UK winters so if you want bearings that won’t let you down then these are the ones to get. These headsets have been revised, improved and expanded for optimum fit, sealing and performance as well as compatibility with a wide range of fork and frame standards. Featuring sealed angular contact bearings, split alloy crown races and upper and lower bearing cups CNC-machined from proprietary aluminium, the headset offers the optimum balance of light weight, strength and durability for performance across all riding disciplines. All models feature a super tough black hard anodised finish, with laser-etched graphics. Nukeproof are so confident in the performance of these bearings that they are offering a 5 year warranty so you can be rest assured your purchase will be a good one. Click here to view and download our Nukeproof Headset Technical Manual. Model Headtube Internal Diameter Steerer Black 1.1/8" EX34-30 - B1 34mm 1 1/8" Black 1.1/8" EX44-40 - B5 44mm 1.5" Black 1.5" EX49-40 - B7 49mm 1.5" Black 1.5" ZS56-40 - B8 56mm 1.5"
In addition to the Warhead cup’s high-quality manufacture for the perfect fit into your frame, the cups come with fully sealed cartridge bearings, which are easily replaceable. There is also the option of upgrading to higher quality Nukeproof ceramic bearings. These individually sold top headset cups are available in both internal and external types for both standard and tapered steerer tubes, which enables you to choose the exact setup to suit your frame and fork's sizing standards. This simplifies the process of upgrading forks or completing a new bike build. The cups are constructed from a CNC machined, proprietary aluminium and offer the optimum balance of strength, durability and a low weight.
In addition to the Warhead cup’s high-quality manufacture for the perfect fit into your frame, the cups come with fully sealed cartridge bearings, which are easily replaceable. There is also the option of upgrading to higher quality Nukeproof ceramic bearings. These individually sold bottom headset cups are available in both internal and external types for both standard and tapered steerer tubes, enabling you to choose the exact setup to suit your frame and fork's sizing standards. This simplifies the process of upgrading forks or completing a new bike build. The cups are constructed from a CNC machined, proprietary aluminium and offer the optimum balance of strength, durability and a low weight. They include split alloy crown races for easy installation and the 1.5” versions can be easily adapted to work with alternative fork steerer types with the addition of the 1 1/8" to 1.5" crown race adaptor (reducer) if required (sold separately).
The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra-compact headlight. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it’s USB Rechargeable, making it the perfect light of choice for commuters and cycling enthusiasts. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility in both day and night. Swift Features: Lumen Output: 500 5 Modes with Run Times: 1:40 – 32:00hrs Charge Time: 1:45 / 3:00hrs Weight: 82g Battery: Li-Po Low Battery Indicator 500 lumen super compact and bright taillight Water / Dust Resistant IP64 Rated Swift Run Times: Low - 10:00h at 150 Lumens Med - 3:40h at 250 Lumens High - 1:40h at 500 Lumens Flash - 12:30h at 500 Lumens Walk - 32:00h at 30 Lumens Sabre Features: Lumen Output: 110 6 Modes with Run Times: 1:30 – 10:30hrs Charge Time: 2:30hrs Weight: 28g Battery: Li-Po Low Battery Indicator 110 Lumen Super Lightweight Daylight Visible taillight Sabre Run Times: Pulse Flash - 7:00h Flash - 6:00h Fast Flash - 17:00h Steady High - 1:45h Steady Med - 4:00h Steady Low - 8:30h
Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility in both day and night. Lumina Micro 650 Features: Lumen Output: 650 5 Modes with Run Times: 1:30 – 20:00hrs Charge Time: 1:45 / 3:30hrs Weight: 130g Battery: Li-Ion Low Battery Indicator Compact and Lightweight Water / Dust Resistant IP64 Rated Lumina Micro 650 Run Times: Low - 7:00h at 150 Lumens Med - 3:00h at 350 Lumens High - 1:30h at 650 Lumens Flash - 6:30h at 650 Lumens Walk - 20:00h at 50 Lumens Sabre Features: Lumen Output: 110 6 Modes with Run Times: 2:00 – 60:00hrs Charge Time: 2:30hrs Weight: 28g Battery: Li-Po Low Battery Indicator 110 Lumen Super Lightweight Daylight Visible taillight Sabre Run Times: Pulse Flash - 7:00h Flash - 6:00h Fast Flash - 17:00h Steady High - 1:45h Steady Med - 4:00h Steady Low - 8:30h
Lumina 1200 Boost (Front Light) NiteRider’s Lumina Boost front light comes with up to 1200 lumens of light output with various light modes with differing outputs and battery life length. The light comes with fast-charging USB charging capabilities with a charging cable that lets you charge the light via any standard USB port. For mounting the light comes with a handlebar clamp mount that fits bars up to 35mm. Light Modes Mode One: 275 lumens – 6 hours Mode Two: 550 lumens – 3 hours Mode Three: 1000 lumens – 1.30 hours Mode Four: 75 lumens – 18 hours Mode Five: 1200 lumens – 1 hour Mode Six (Flashing): 6.30 hours Mode Seven (Flashing): 10 hours Mode Eight (Flashing): 18 hours Mode Nine (Flashing): 18 hours Solas 250 (Rear Light) The rear light in this set is the Solas which comes with 250 lumens of light output with four different light modes including two flashing modes and two constant. The light is also USB rechargeable and comes with a low light indicator which lets you know when to charge and when your light is fully charged. A versatile seatpost mount is also provided. Light Modes Mode One (Flashing): 6.30 hours Mode Two (Flashing): 4.30 hours Mode Three: 7.30 hours Mode Four: 40 hours In the Box Lumina 1200 Boost LED light head Internal li-ion battery Handlebar clamp mount (fits up to 35mm) USB charging cable Solas 250 rear light Seatpost mount USB cable
Lumina OLED 1200 Boost The front light included in this set comes with the new NiteRider OLED screen that puts you fully in the driver’s seat – you can easily change between light modes and see your battery life in each changing mode. Easily switch between the nine different light modes including the ‘Boost’ mode which provides the ultimate in light perfect for extreme terrains when lighting conditions are at their darkest. The Lumina is USB rechargeable and comes with an integrated, quick-release bracket that will work with most handlebars types. Light Modes Mode One: 275 lumens – 6 hours Mode Two: 550 lumens – 3 hours Mode Three: 75 lumens – 18 hours Mode Four (Boost): 1200 lumens – 1 hours Mode Five (Flashing): 6.30 hours Mode Six (Flashing): 10 hours Mode Seven (Flashing): 18 hours Mode Eight (Flashing): 18 hours In the Box LED light head with OLED display Internal lithium-ion battery Handlebar clamp mounts (fits up to 35mm) USB charging cable Solas 250 The rear light in this set comes with 250 lumens of bright light output with a wide spreading beam that will keep you seen from multiple angles. The light also comes with a range of light outputs which can easily be toggled between by holding down on the power button. The modes include both flashing and constant as well as a ‘Group Ride’ mode that ensures you stay visible without blinding or distracting fellow riders. The rear light is also USB rechargeable for quick and easy charging on the go. Light Modes Mode One (Flashing): 6.30 hours Mode Two (Flashing): 4.30 hours Mode Three: 7.30 hours Mode Four (Group Ride): 40 hours In the Box LED tail light Seatpost mount USB cable
Size guide: Small = 7.5 - 8" (19 - 20cm) Medium = 8 - 8.5" (20 - 21.5cm) Large = 8.5 - 9" (21.5 - 23cm) XL = 9 - 10" (23 - 25cm) (To find your size, measure the circumference around the knuckles excluding the thumb, your hand should be open with the fingers together).