Vision TriMax Carbon SeatpostThis top-quality seatpost features carbon construction to keep you supportive and steady when it matters most. Available in a choice of lengths, this stiff and lightweight mast is all set to keep you poised for the podium. Using a one-bolt attachment system, the clamp is compatible with standard and oval saddle rails for ultimate versatility, while the 20mm offset gives additional leg room for riders who prefer to sit that bit further back. Features: Material: Carbon Setback: 20mm Suitability: 7mm rails and 7x9mm oval rails Hardware: CrMo Weight: 221g (approx)Buy Vision Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
Zipp Service Course Setback SeatpostThis road bike seatpost features a robust 6061 aluminium construction, which gives it an excellent combination of strength and durability on every mile of road. Zipp has also kitted out this model with a 6061 aluminium clamp and steel hardware, so you can benefit from a tight and secure hold to your saddle rails whatever the conditions. Another highlight is its etched Zipp logo finishing, which provides a sleek appearance to complement your ride.Adjustable Road Bike SeatpostZipp's Service Course seatpost is lightweight and strong for security and designed to offer a precise fit at an affordable price. It also provides easy tool access to the downward facing bolt for easy setup and micro-adjustments after it's mounted. Better fit means better performance to make you faster. An out-of-position saddle means wasted energy with every pedal stroke. The secure, low-profile clamp allows the saddle to slide farther back along the rails, and with this 20mm setback option, it's possible for nearly any rider to achieve the perfect fit. For high strength, low weight, and efficient use of every gram, the shaft and head are not bonded but are 3D-forged from 6061 aluminium. The Service Course seatpost is 350mm in length.Features: Seatpost Material: AL6061 Aluminium Clamp Material: AL6061 Aluminium Hardware Material: Steel Finish: Etched Zipp Logo Use: Road Length: 350mm Offset/Setback: 20mmTechnologies: 2-bolt adjustability. 3D-forged from 6061 aluminium. Fits all common saddle rail types. Lifetime manufacturer's warranty.Manufacturer's Part Numbers: ZP8048001 Silver 31.6mm x 350mm ZP8048000 Silver 27.2mm x 350mmBuy Zipp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ready for every mile of road, this seatpost comes equipped with a hard-wearing 6061 aluminium construction for an excellent combination of strength and durability on your road bike. Zipp has also kitted out this model with a 6061 aluminium clamp and steel hardware, so you can benefit from a tight and secure hold to your saddle rails whatever the conditions. Another highlight is its etched Zipp logo finishing, which gives it a sleek appearance to complement your ride. Adjustable Road Bike Seatpost Zipp’s Service Course seatpost is lightweight and strong for security and designed to offer a precise fit at an affordable price. It also provides easy tool access to the downward facing bolt for easy setup and micro-adjustments after it’s mounted. Better fit means better performance to make you faster. An out-of-position saddle means wasted energy with every pedal stroke. The secure, low-profile clamp allows the saddle to slide farther back along the rails, and with this 20mm setback option, it’s possible for nearly any rider to achieve the perfect fit. For high strength, low weight, and efficient use of every gram, the shaft and head are not bonded but are 3D-forged from 6061 aluminium. The Service Course seatpost is 350mm in length. Technologies: - 2-bolt adjustability. - 3D-forged from 6061 aluminium. - Fits all common saddle rail types. - Lifetime manufacturer's warranty. Manufacturer's Part Numbers: ZP8048001 Silver 31.6mm x 350mm ZP8048000 Silver 27.2mm x 350mm
The EA70 Offset takes Easton's top-end aluminium seatpost and adds 12-millimeters of setback. Durability is boosted by EA70 TaperWall aluminium tubing and a forged two-bolt integrated head. The EA70 offset post is available in three diameters.Finish - Black AnoWeight - 250g (31.6mm)Quill Sizes - 27.2mmMaterial - Easton EA70 AluminiumHead Type - 10mm SetbackLength - 350mm
Zipp’s Service Course seatpost is light weight and strong for security and designed to offer a precise fit at an affordable price. It also provides easy tool access to the downward facing bolt for easy setup and micro adjustments after it’s mounted. Better fit means better performance to make you faster. An out-of-position saddle means wasted energy with every pedal stroke. The secure low-profile clamp allows the saddle to slide farther back along the rails and with 0 and 20mm setback options it’s possible for nearly any rider to achieve the perfect fit. For high strength low weight and efficient use of every gram the shaft and head are not bonded but are 3D-forged from 6061 aluminum. The Service Course seatpost is 350mm in length. FEATURES Two cosmetic options bead-blast black or distinctive silver 2-bolt adjustability 3D-forged from 6061 aluminum Fits all common saddle rail types Lifetime warranty SPECIFICATIONS POST DIAMETER 27.2mm 31.6mm OFFSET/SETBACK 0mm 20mm POST LENGTH 350mm COLOR (SP) Blast Black Bright Silver MATERIAL (SP/ST) Al-6061 HARDWARE Steel CLAMP MATERIAL Al-6061