The Park Tool AWS10C multi tool is a selection of essential Metric hex wrenches in a convenient folding package. The one piece composite handle is comfortable, lightweight, slip resistant and 40% stronger than steel. Wrenches and screwdrivers are made from high torque Bondhus Protanium industrial quality tool steel for a long life. The Park Tool AWS10C Multi Tool includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm and 6mm hex wrenches.
Park Tool introduced the bicycle world to the three-way hex wrench set over 25 years ago. Updated in 2007, the Park AWS-1 and AWS-8 have colour-coded hex wrenches that allow sizes to be quickly identified, as well as a redesigned centre handle that fits perfectly in the palm of the hand. The hexes are made from Bondhus Protanium industrial steel and are hardened and tempered for long life. The Park Tool AWS1 Hex Wrench Tool includes 4mm, 5mm and 6mm hex key wrenches.
Park Tool introduced the bicycle world to the three-way hex wrench set over 25 years ago. This Park tool has excellent ergonomics and effective leverage as the composite centre fits into the palm of the hand. The hexes are made from Bondhus Protanium industrial steel and are hardened and tempered for long life. The Park Tool AWS3C Hex Wrench Tool includes 2mm, 2.5mm and 3mm hex key wrenches.
The BBT-5 / FR-11 may have a name that sounds like it is straight out of a sci-fi film but it is really a rather simple, yet essential piece of workshop equipment for anyone that owns Campagnolo components. Fitting 12-tooth internally splined Record, Chorus and Athena cartridge bottom brackets and Campagnolo cassette hub lockrings (including 11-speed lockrings) the BBT-5 / FR-11 is a dual purpose piece of kit. The oversized centre hole and thin wall design allows use without removal of cones and locknuts, saving precious riding time. The one-inch base fits the end of the Park SR-1 and FRW-1 tools or simply an adjustable wrench or bench vice.
This updated cassette lockring tool from Park Tool is an essential tool for the fitting/removal of your cassette and can also be used to fit and remove centre-lock brake discs. It now also fits the SRAM XX1 11-speed cassettes.Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockringsGuide pin helps to hold the cassette tool in placeThis has been constructed with heat treated alloy steel with a one-inch base that will fit a wrench or a vice. The thin wall construction will allow you to use this without removing the cones and locknuts for extra convenience. It will also fit some disc brake lockrings giving this a tool multipurpose use.
Hope are now offering their range of top and bottom cups available separately, allowing you to pick 'n' mix between the standards to suit your frame / fork combo. Each cup is CNC machined from 2014 T6 aluminium whilst Hope specify custom INA Swiss manufactured precision cartridge bearing races for durability and performance. Protection from the elements is achieved through an adjustable taper ring covers and integrated rubber seals, whilst the bearings also incorporate their own sealing and being made from stainless steel resist corrosion.
Hope are now offering their range of top and bottom cups available separately, allowing you to pick 'n' mix between the standards to suit your frame / fork combo. Each cup is CNC machined from 2014 T6 aluminium whilst Hope specify custom INA Swiss manufactured precision cartridge bearing races for durability and performance. Protection from the elements is achieved through an adjustable taper ring covers and integrated rubber seals, whilst the bearings also incorporate their own sealing and being made from stainless steel resist corrosion.
Hope are now offering their range of top and bottom cups available separately, allowing you to pick 'n' mix between the standards to suit your frame / fork combo. Each cup is CNC machined from 2014 T6 aluminium whilst Hope specify custom INA Swiss manufactured precision cartridge bearing races for durability and performance. Protection from the elements is achieved through an adjustable taper ring covers and integrated rubber seals, whilst the bearings also incorporate their own sealing and being made from stainless steel resist corrosion.
FSA's The Pig headset is suitable for BMX and Freeride disciplines. Gyro compatible, it uses Cromoly cups and crowns for huge strength.Steerer Size: 1 1/8"Upper Stack Height: 16.4mmLower Stack Height: 13.6mmTotal Stack Height: 30mmWeight: 180gSpares: Upper Bearing: 160-6120 / Lower Bearing: 160-6725 / Crown Race: 160-5501
The BORG 26 2:1 Road Wheelset uses an alloy rim that s tubeless ready (tape & valves supplied) 26mm deep and 24mm wide. It s a stiff rim and the wheelset has 20 spokes for the front wheel and 24 for the rear.26mm deep 24mm wide tubeless ready wheelset700c2:1 lacing for the rear hubSapim aero spokesShimano 8/9/10/11 speed, Campagnolo 9/10/11/12 speed or SRAM XDR 12 speed compatible.Reliable NTN bearingsWeight 1610g for a pair (1625g with tape)BORG Wheels HubsThe rear rim has a 3mm offset to improve tension balance which is further improved by the 2:1 lacing. All the tricks are used to make this a reliable but fast and fun wheelset to ride on. The rear wheel lacing pattern makes this wheel particularly stiff with a reduced tendency to rub brakes compared with other wheels using rim of a similar depth. It also makes it quite responsive.The front wheel is laced radially with Sapim CX rays (black) and black alloy nipples. Sapim HM nipple washers and nipple freeze are used to ensure rim and nipple longevity. The rear 24H wheel is laced 3x drive side and radial non drive side in a 16:8 pattern. Sapim CX force triple butted aero spokes are used along with Sapim black alloy nipples with Sapim HM nipples washer and nipple freeze to ensure the longevity of the wheel. 2:1 lacing offers the rider less brake rub, stiffer rear wheel due to the optimised geometry and longer spoke life. Pads are still recommended to be 1.5m. to 2mm from the rim for maximum mechanical leverage. Shimano 8/9/10/11 speed, SRAM XDR 12 speed Campagnolo 9/10/11/12 speed freehubs available. The hub is a BORG Wheels creation. The front hub has 2x 61901 NTN bearings running on a 12mm alloy axle. The hubs use NTN 6901 bearing for the front wheel and NTN 6902 bearing in the rear hub shell. The freehub has NTN 6802 bearings. The hub uses a large 36T ratchet ring. The freehub has 4 independently sprung pawls. Its loud. BORG likes that and it's also a sign of strong pawl springs, lots of pawls and teeth which is a good thing.All the Campagnolo freehubs offered are 9/10/11/12 speed compatible. All the Shimano freehubs offered are 8/9/10/11 speed compatible and they come with a spacer for 8/9/10 speed cassettes (although an additional 1mm spacer supplied with a 10-speed cassette is needed too). The XDR freehub is for SRAM AXS 12 speed cassettes.Please note images are for illustration purpose only.
Hand built by Malcolm Borg the BORG31 wheelset is a semi aero, very stiff wheelset based on a wide rim which is perfect for all weather training use, road racing or CX use.A robust all weather race orientated wheelset24mm wide and 31mm deep tubeless ready rims (also compatible with tubes)20 spoke front and 24 spoke rearMiche Primato hubs for reliabilityLife of the rim warrantyWeight (1655g (approx)The BORG31 has been built around a 24mm wide and 31mm deep Kinlin rim with an internal width of 19mm. The rear rim is offset (asymmetric) which increases non drive spoke tension, which is a useful way of increasing spoke life. The rims are tubeless ready and come with tubeless tape, valves and IRC tyre levers. The rims have been built with 20 black Sapim CX-ray spokes at the front and 24 black Sapim CX-force spokes at the rear with black alloy SILS (self locking nipples). The Cx-force spokes have a thicker elbow than most spokes (triple butted) this means longer spoke life.To ensure the best value, performance and durability the BORG22 wheels use Miche Primato hubs. The bearings are 2x6001 C3 in both the front and rear hub shells. The rear freehub has 2x 6901 bearings. The axles front and rear are 12mm diameter and made of steel. The front and rear hub are a free axle design making disassembly really simple. Both the front and rear hub have a bearing preload adjuster which should be set once the wheels are installed in the bike. Simply a reliable wheelset for all weathers and combined with the right tyre it could be the only wheelset you need.Whats included:Wheelset front and rear with Sapim CX- ray and CX-Force aero spokesTubeless rim tapeBlack alloy tubeless valvesQR skewers for Miche and Shimano hubsThe best guarantee (for the life of the rim against spoke failure and anything that could be termed a defect)
The Exposure Quick Release Handlebar Bracket Set is simple, sturdy, easy to use and is perfect for enabling you to run your favourite Exposure Light on another bike or as a replacement for one you may have misplaced. Includes clip for mounting an Exposure helmet light.Incredibly simple and easy to use design takes mere seconds to mountEnables you to mount your Exposure light in an instant, getting you out on the trails quickerSuitable for 31.8-35mm handlebarsIncludes clip for mounting Exposure helmetThe simple single bolt design means it takes a matter of seconds to attach the mount to your bike. Once installed it is a breeze to securely fit your Exposure light to the bars using the simple mounting mechanism. Compatible with all Exposure main headlamps from 2007 onward and 35mm handlebars, the Exposure QR Handlebar Bracket is light, easy to use and, as with all Exposure products, beautifully made.