Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customisable rubber flap that can be cut to meet your handlebar's inner diameter. The EnCase System: Bar Kit One includes a Hex Bit Wrench Multi-tool, a Chain + Tyre Plug Multi-tool, and two Storage Sleeves. HEX BIT WRENCH MULTI-TOOL - 14 functions (spoke wrench for 0.127" (3.23mm) nipples; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx compatible) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when tool head is bent - Store in handlebar with EnCase Storage Sleeve - Magnet on the bottom of tool for convenient storage on steel bike stands (or refrigerators) CHAIN + TYRE PLUG MULTI-TOOL - Compatible with all bicycle chains including 12 speed - Inserter tool and bacon strips plug holes in tubeless tyres - Five strips included; refills available (EnCase System Extras) - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench STORAGE SLEEVES - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminium end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a presta-to-schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customise fit for larger-diameter road handlebars Compatibility Fits most mountain handlebars and road handlebars. Does not fit ergonomic-style road bars with extra bends in the drops. Works with both carbon and aluminium handlebars. The minimum internal bar diameter is 17.5mm. Known incompatible handlebars: Syntace Vector, Diety Skywire, Jones H-Bar Loop SG 2.5, Chromag BZA, BMC RCB01, S-Works Hover Carbon
Wolf Tooth - Precision Is Integrated Standard HeadsetAny Frame That Uses Is (Integrated Standard) Headsets With 41mm Upper And 52mm Lower Outer Bearing Diameter,Uppers And Lowers Sold Separately,Enduro Stainless Steel Sealed Bearings Included On Both The Upper And Lower,.Upper Assembly Features:Ultralight Stem Cap With Integrated Spacer Plus An Aluminium Bolt And A Star Nut,7, 15 And 25mm Stack Height Top Cover Options (7mm Cover = 8mm Total Stack, 15mm Cover = 15mm Total Stack, 25mm Cover = 25mm Total Stack,O-ring Seal Prevents Water Intrusion Around The Steerer Tube,Custom Moulded Upper Lip Seal Provides Additional Protection For The Upper Bearing,.Lower Assembly Features:Custom Moulded Dual Lip Seal On The Crown Race To Protect The Lower Bearing In The Toughest Conditions.
We designed these bolts to be the best on the market. These single chainring optimized bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut so no spanner is needed. These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs.
Wolf Tooth Headset Spacers for Trek Knock Block are machined in the USA out of aircraft-grade aluminium. Available in a variety of colours to match the style of your bike.These spacers are to be used only with Trek Knock Block system. They are not compatible with other bikes.Trek developed Knock Block as an integrated frame protection system to prevent self-inflicted scuffs, dents, or cracks from spinning handlebars. Knock Block consists of a special stem and a stop chip on the frame. The stop chip limits the turning range of the custom keyed headset cover. The top of the headset cover has notches that lock into corresponding notches on the headset spacers, which also correspond with notches in the stem for a strong connection to the steer tube. These parts work together to prevent the crown of the fork and handlebar controls from hitting the frame when bars are turned too far in either direction. Key Features:Compatible only with Trek Knock Block,These spacers have unique raised features that key to Knock Block compatible stems (made by Bontrager),1 1/8" top (straight 1 1/8" or 1 1/8" to 1 1/2" taper) steerer tubes only.
We designed these bolts to be the best on the market. These single chainring optimized bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut so no spanner is needed. These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs.Compatibility:Any Wolf Tooth bolt-on Drop-Stop® chainrings with through holes,Works with other brands single chainrings as well,.Complementing products:Wolf Tooth Drop-Stop chainrings,GCX and GC cassette expanders,.Tech Specs:Designed and manufactured in Minneapolis, MN USA,7-8 NM tightening torque with light grease on threads only,Material: 7075-T6 aluminum,Size: M8 x.75 x 5,Weight: 4 bolts - 8 grams.
The Wolf Tooth Precision Headset Spacers Are Handcrafted In The USA From Premium-grade Anodised Aluminium. If You're Looking To Add Some Extra Vibrancy To Your Ride, Look No Further. This 5 Pack Comprises Of 5 Identical Spacers Of The Colour And Size Of Your Choice.Including Nifty Measurement Details On The Top Edges For Ease Of Set Up And Perfectly Paired With Wolf Tooth Precision Headsets, These Are A Must-have.Key Features:Handcrafted By Wolf Tooth In Minneapolis, USA,1 1/8" Top (Straight 1 1/8" Or 1 1/2" To 1 1/8" Taper) Steerer Tubes Only,6061-t6 Aluminium,Options: 3mm, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm,5 X Identical Spacers Of Size And Colour Of Your Choice,Weight: 3mm - 2g , 5mm - 3g, 10mm - 5g, 15mm - 7g, 20mm - 9g, 25mm - 11g, 30mm - 13g.
The Wolf Tooth Direct Mount Chainring for Cannondale Hollowgram CX and Road Offset is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Cannondale Hollowgram CX and Road Offset cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:This direct mount chainring will replace your existing spider/chainring on Road and CX Cannondale Hollowgram SI & SISL cranks.,These are NOT compatible with Cannondale mountain bike cranksets because the chainline will be too far off from optimal.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline 44mm.
Key Features:Manufactured by enduro and built to the highest specifications for lasting quality, even through repeated exposure to foul weather..
The Wolf Tooth Performance Integrated Standard Headset is machined in the USA from aircraft-grade 6061 aluminium, to ensure a lightweight, strong, and durable design.The headset uses Enduro chromium steel bearings with a black oxide treatment for superb durability and high load capacities.The headset has three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset.The Performance headset comes with a 1-year warranty. Key Features: Compatible with any frame that uses Integrated Standard headsets with 41mm upper and 52mm lower outer bearing diameter,Uppers and lowers sold separately,Enduro black oxide steel sealed bearings included on both the upper and lower., Upper headsets ship with a star nut which can only be used on forks with steel or aluminium steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately). (Never use a star nut on a carbon steerer tube).,1-year warranty,Weight: 7mm, 52g,Material: 6061 aluminium,Made in the USA,. Upper Assembly Features: Ultralight Stem Cap with Integrated Spacer plus an aluminium bolt and a star nut., 7mm top cover = 8mm total stack., O-ring seal prevents water intrusion around steerer tube.,Custom-moulded upper lip seal provides additional protection for upper bearing..
The Wolf Tooth Performance Zero Stack Headset is machined in the USA from aircraft-grade 6061 aluminium, to ensure a lightweight, strong, and durable design.The headset uses Enduro chromium steel bearings with a black oxide treatment for superb durability and high load capacities.The headset has three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset.The Performance headset comes with a 1-year warranty. Key Features: Any frame that uses ZS (Zero Stack) headsets with 44mm upper and 56mm lower head tube inner diameter., Uppers and lowers sold separately., Enduro black oxide steel sealed bearings included on both the upper and lower., Upper headsets ship with a star nut which can only be used on forks with steel or aluminium steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately). (Never use a star nut on a carbon steerer tube) ,1-year warranty., Weight: 55-58g, Material: 6061 aluminium, Made in the USA,. Lower Assembly Features: Custom-moulded dual-lip seal on the crown race protects lower bearing in the toughest conditions.,All components precision machined in-house at Wolf Tooth from aircraft grade aluminium to ensure the highest level of quality..
The Wolf Tooth Performance External Cup Headset is machined in the USA from aircraft-grade 6061 aluminium, to ensure a lightweight, strong, and durable design.The headset uses Enduro chromium steel bearings with a black oxide treatment for superb durability and high load capacities.The headset has three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset.The Performance headset comes with a 1-year warranty. Key Features: Compatible with any frame that uses an external cup headset with a 34mm upper head tube inner diameter and 34mm, 44mm, or 49mm lower head tube inner diameter.,Stack height designation for EC headsets includes 10mm cup (see tech specs).,Uppers and lowers sold separately.,Enduro black oxide sealed bearings included on both the upper and lower.,Upper headsets ship with a star nut which can only be used on forks with steel or aluminium steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately). (Never use a star nut on a carbon steerer tube).,1-year warranty,Weight: 55-58g,Material 6061 aluminium, Made in the USA,. Upper Assembly Features: Ultralight Stem Cap with Integrated Spacer plus an aluminium bolt and a star nut.,5mm top cover = 16mm total stack.,O-ring seal prevents water intrusion around the steerer tube.,Custom-moulded upper lip seal provides additional protection for upper bearing. .
Replacement bearings for Wolf Tooth headsets. Enduro chromium steel bearings with a black oxide treatment for superb durability and high load capacities.