Heat treated alloy tool steel, one inch base fits wrench or bench vise. The FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs.Cassette Lockring Tool with 12mm Guide Pin:Utilizes a 12mm guide pin to stabilize the tool in use,Fits 12-spline cassette lockrings from Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and others (23.5mm diameter),Fits some Shimano® and similar disc brake rotor lockring,.Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across.Cassette Lockring Tool with 5mm Guide Pin:Fits Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and other cassette lockrings,Also fits some Shimano® disc brake lockrings,Guide pin stabilizes tool.
Key Features: A bespoke set of 5 snap ring or circlip pliers designed to work with the vast majority of fittings found on suspension and hydraulic systems,Forged for strength and durability and then dipped in Park blue vinyl for comfort and grip,Set includes .9mm straight internal, 1.3mm bent internal, 1.3mm bent external and 1.7mm bent internal pliers,Covered by Park Tool's legendary lifetime warranty.
Key Features: The RBS-5 brush set includes the large side scrubbing brush, two roller brushes, and two wicking foam blocks,Compatible with CM-5, CM-5.2, and CM-5.3 Cyclone™ Chain Scrubber systems .
Three hex wrenches in an effective packageExcellent ergonomics and effective leverage as the composite centre fits into the palm of the handSpeeds any job up as you have three hex keys in your hand at any one timeMade from heat-treated Bondhus Protanium high torque steel for a long life2, 2.5, and 3 mm
Key Features: Facing improves the alignment of bearings in the headset, The 690-XL has an approximate diameter of 58mm and is a larger version of the 690 facer for facing head tubes with low profile Zero Stack type headsets,Must be used with the 768 pilot to ensure the frame is reamed and faced accurately.
Part of a range of wrenches with offset heads to improve access in awkward placesSpecially shaped and sized for specific bicycle jobs, especially on brakes14 mm open ended wrench on one end, with lugs on the other end that locate into the tension springs on calliper brakes
A selection of essential Torx wrenches in a convenient folding packageOne piece composite handle is comfortable, lightweight, and slip resistant - and 40% stronger than steelWrenches are made from high torque Bondhus Protanium industrial quality tool steel for a long lifeEasy to recognise on the work bench or tool box as this Torx set comes in green rather than the traditional Park blueThe T7, T9, T10, T15, T20, T25, T27, T30, and T40 Torx sizes supplied cover all the requirement of bikes todayTorx wrenches are becoming increasingly popular on Disc brakes and chainring bolts as they make it harder to round off bolts
Key Features: Shop quality, preset torque driver that limits torque applied to fasteners, preventing overtightening and damage to lightweight components, Preset to apply 4 Newton Meter (Nm) of torque when rotating clockwise, All metal internal construction for long life, Comfortable ergonomic composite moulded grip, Includes 3mm, 4mm, 5mm and T25 bits (stored in handle), 1 1/4 inch drive, Magnetic socket retains bits, Assembled and calibrated at the PARK TOOL factory in St. Paul, Minnesota.
Attractive bit set holders and a selection of bits for the most common screwdriving applications. Extra-hard quality, robust and compact packaging. Set 1 (BOSCH006) includes - 1 x T8,1 x T10, 2 x T15; 2 x T20; 2 x T25; 1 x T27; 1 x T30; 1 x T40; 1 magnetic universal holder,Set 2 (BOSCH007) includes - 1 bit holder, 11 bits (PH1/PH2/PH3; PZ1/PZ2/PZ3; T10/T15/T20/T25/T30),Set 3 (BOSCH008) includes - 1 bit holder, 11 bits (PH1/PH2/PH3; PZ1/PZ2/PZ3; T10/T15/T20/T25; S0,6x4,5; S0,8x5,5),Set 4 (BOSCH009) includes - 1 bit holder, 11 bits (PH2; PZ2; T10/T15/T20/T25; S0,6x4,5; S0,8x5,5; HEX3/HEX4/HEX5).
6 Bit pocket screwdriver with built in ratchet and the quality you expect from Bosch.Attractive pocket screwdriver Bit-Set for on the way with the most common bits,Robust and compact, fits in every pocket,6 bits always with you, screwdriver also serves for storage,Easy handling in confined spaces due to built-in ratchet,Includes - Pocket, 6 Bits (SL6, HEX 4, HEX 5, Torx 25, PZ2, PH2).
6 Piece screw and ratchet set in a handy carry case with all the main screw, hex and torx bits along with magnetic bit holder and ratchet wrench.Suitable for all common screwing and assembly work,Colour-coded bits for a quick overview and faster access to the appropriate bit,Compatibility: Suitable for all brands of power tools and hand screwdrivers,Includes – 19 Bits (PH 1/2/2/3; PZ 1/2/3; SL 4/5/6; H 3/4/5/6; T 10/15/20/25/30), Magnetic bit holder, Socket wrench adapter, 4 Sockets (Ø 6/8/10/13), Ratchet wrench.
Additional insert for Birzman Crown Race Setting Tool (BM08-CRST). Specification: Material: Alloy steel. .