This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
Features:A self-contained set for accurate facing of a bottom bracket shell.Simple to use tool which ensures the seating faces of a bottom bracket shell are parallel, which is essential for the smooth running and long life of bottom brackets, especially Shimano HollowTech II.Comes with threaded inserts to ensure the tool is in the perfect position for accurate facing.A powerful spring keeps the cutter at the ideal pressure for a perfect job.High quality cutting head is replaceable.Use with plenty of cutting oil for a superior job.Made in the USA and covered by Park's legendary limited lifetime warranty
Park Tool Bottom Bracket Facing Set BFS-1Park ToolBottom Bracket Facing Set BFS-1The Bottom Bracket Facing Set is designed to be a complete self-contained facing set, combining top quality precision parts with ease of use. Simply install the threaded inserts using the facer handle, then insert the facing tool through the guides and install the tension spring and speed nut.After applying a liberal amount of cutting oil, the BFS-1 easily cuts the shell material, giving you a clean, faced surface. Now you're ready to install the bottom bracket.Buy Park Tool BB Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell.
Park Tool Bottom Bracket Tapping+Facing Set BTS-1 The BTS-1 is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. Features:The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693), for the adjustable and fixed cups are available as accessories.Buy Park Tool Bottom Bracket Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket/Cassette Tool BBT-5/FR-11Specially created by Park Tool to suit Campagnolo’s bottom brackets and cassette lockrings, the BBT-5/FR-11 bike tool is an essential workshop addition. Made from tool-specific alloy steel, it’s made for repeated use and its large nut-style base makes it easy to use with wrenches or your vice, enabling you to get the grip you need to remove stubborn components. Plus, despite its high strength, Park Tool gave it thin-walled sides, so you can easily remove cassettes without the need to disassemble the hubs axle.Features: Material: Heat Treated Alloy Tool Steel Fits all Campagnolo cassette lockrings Also fits Campagnolo Record, Chorus, Centaur, and Athena bottom brackets The outside diameter of the BBT-5/FR-11 is 22.8mm and has 12 splines Always use a skewer or axle nut to hold the tool firmly in place during removal and installation Centre bore for axle or spindle clearance is 16mmBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The unique, wedge-shaped Park Tool Brake Piston Press slides into a hydraulic disc brake caliper to pre-set the piston when replacing pads, aligning pads, and performing other service procedures. Makes hydraulic disc brake maintenance and repair faster and easier.
A precision tool that provides a piloted means of tapping threads in a Bottom bracket shellIncludes English taps 1.370 inch x 24 tpi right hand thread (for adjustable cup) and 1.370 inch x 24 tpi left hand thread (for fixed cup)Italian thread taps 36 mm x 24 tpi right hand thread are also availableAfter tapping the taps act as a guide to allow the facing tool (included) to clean up the faces of the Bottom bracket shell keeping them square with the axleInvaluable top quality tool for every workshop
It features one-hand operation with a thumb lock to hold the cable tight while your hand is removed to tighten pull-up bolts and nuts. Made from heat treated tool steel, chrome plated, and featuring cushion grips for comfort. A must for any shop, home or professional mechanic.
Park Tool Campag Crank & Bearing Tool Set (CBP-8)The Campag Crank & Bearing Tool Set CBP-8 features everything you need to safely and efficiently remove and install on Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems. Safe Removal and Installation of Cranks and Bottom BracketsThe CBP-8 includes a crank puller for aluminium and carbon fibre Power Torque systems, a bearing puller for Power Torque and Ultra Torque systems and a bearing setter for both systems, making the job of replacing your cranks and BBs less labour intensive. Also included in the set are: Removal adaptor for Power Torque crank bearings Removal protection pads for use with carbon cranks Removal protection adaptor for use with aluminium crank arms Crank removal extension plug for Power Torque Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Campag Crank & Bearing Tool Set CBP-8 comes equipped with everything you need to get to work on your specialised cranks and bearings, taking them off and putting them back firmly and safely to keep your pedalling in peak condition. The set features a Power Torque compatible crank puller, crank removal extension plug and crank bearing removal adaptor as well as a bearing puller and setter which will also work with Ultra-Torque systems. Completing the set are protective pads and adaptors for use with both carbon and aluminium cranks, making it just the job for an often arduous task.
Heat treated alloy tool steel, one inch base fits wrench or bench vise. The FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs.Cassette Lockring Tool with 12mm Guide Pin:Utilizes a 12mm guide pin to stabilize the tool in use,Fits 12-spline cassette lockrings from Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and others (23.5mm diameter),Fits some Shimano® and similar disc brake rotor lockring,.Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across.Cassette Lockring Tool with 5mm Guide Pin:Fits Shimano®, SRAM® (including 1x), SunRace®, SunTour®, Chris King® and other cassette lockrings,Also fits some Shimano® disc brake lockrings,Guide pin stabilizes tool.