Vision TriMax Carbon SeatpostThis top-quality seatpost features carbon construction to keep you supportive and steady when it matters most. Available in a choice of lengths, this stiff and lightweight mast is all set to keep you poised for the podium. Using a one-bolt attachment system, the clamp is compatible with standard and oval saddle rails for ultimate versatility, while the 20mm offset gives additional leg room for riders who prefer to sit that bit further back. Features: Material: Carbon Setback: 20mm Suitability: 7mm rails and 7x9mm oval rails Hardware: CrMo Weight: 221g (approx)Buy Vision Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Lightweight 12-speed HG+ cassette with rigid alloy sprocket carrier for reduced weight and better shifting performance, even under the most demanding gear changes Hyperglide+ sprockets have been designed to reduce weight with improve teeth shaping providing accurate shifting and reduced wear Wide gear range to meet the demands of all types of rider For use with 12-speed chains
Powerful fully bled XT hydraulic Servo Wave disc brake Fully bled lever and calliper comes without adapters or rotors giving you the freedom to customise to suite your bike short stroke Servo-Wave mechanism for quick pad engagement and more power for aggressive riding Oversized 22mm twin phenolic pistons optimized for heat insulation, lightweight and stiffness Using Ice Tech alloy fin pads further improving heat radiation performance Recommended for use with Ice Tech rotors for optimum braking performance in a choice of 140, 160, 180 and 203 mm Lightweight forged calliper design that increases rigidity and reduces weight Forged alloy brake lever for optimum strength and reliability Mineral oil brake fluid is non-corrosive and less hazardous than conventional hydraulic brake fluid Shim-less mounting system allows for quick setting up brake lever featuring reach and free stroke adjustment Hinged clamp for quick installation I-spec-EV compatible The kit also contains sintered pads, plus spare olives and insert should you wish to adjust the length of the cuttable hoses Hose length 1700 mm
This genuine Shimano replacement part will cut your brake hose cleanly at 90 degrees making the job easier and professional.It also sets both silver and gold inserts into hose (2.1 and 2.3 mm bore diameter).
The Shimano Deore FC-M6100-1 crank features an entirely new construction, using direct mount chainrings, special gear tooth profile for improved chain retention, and a 181 mm Q-factor that is compatible with 157 mm O.L.D. frames.Superior chain retention for smoother riding even over rough terrainDynamic Chain Engagement+ improves chain engagement and retentionMore manoeuvrability and aggressive riding realisedFor extra wide 157 mm O.L.D. and 56.5 mm chainlineDirect mount chainringGreat value Deore M6130 2-piece design chainset for 12-speed Dyna-Sys MTB HG-X transmissionsForged crank arms rigid whilst being incredibly strong and durableHollowTech II integrated bottom bracket design uses a wide bearing placement with a large axle diameter for increased stiffness, efficiency and added durabilityLightweight aluminium chainringWe recommend that the bottom bracket is initially installed by a bike shop to ensure perfect facing and fit56.5 mm chain line for use with 157 mm O.L.D. frames12-speed Dyna-Sys compatible
The Shimano Deore FC-M6100-1 crank features an entirely new construction, using direct mount chainrings and special gear tooth profile for improved chain retention. The HollowTech II integrated bottom bracket design uses a wide bearing placement with a large axle diameter for increased stiffness, efficiency and added durability.Great value Deore M6100 2-piece design chainset for 12-speed Dyna-Sys MTB HG-X transmissionsForged crank arms rigid whilst being incredibly strong and durableLightweight aluminium chainringWe recommend that the bottom bracket is initially installed by a bike shop to ensure perfect facing and fit52 mm chain line for use with 135 /142 mm O.L.D. framesDirect mount chain ring12-speed Dyna-Sys compatible
The Shimano Deore FC-M6100-1 crank features an entirely new construction, using direct mount chainrings and special gear tooth profile for improved chain retention. The HollowTech II integrated bottom bracket design uses a wide bearing placement with a large axle diameter for increased stiffness, efficiency and added durability.Great value Deore M6100 2-piece design chainset for 12-speed Dyna-Sys MTB HG-X transmissionsForged crank arms rigid whilst being incredibly strong and durableLightweight aluminium chainringWe recommend that the bottom bracket is initially installed by a bike shop to ensure perfect facing and fit52 mm chain line for use with 135 /142 mm O.L.D. framesDirect mount chain ring12-speed Dyna-Sys compatible
The Shimano Deore FC-M6100-1 crank features an entirely new construction, using direct mount chainrings and special gear tooth profile for improved chain retention. The HollowTech II integrated bottom bracket design uses a wide bearing placement with a large axle diameter for increased stiffness, efficiency and added durability.Great value Deore M6100 2-piece design chainset for 12-speed Dyna-Sys MTB HG-X transmissionsForged crank arms rigid whilst being incredibly strong and durableLightweight aluminium chainringWe recommend that the bottom bracket is initially installed by a bike shop to ensure perfect facing and fit52 mm chain line for use with 135 /142 mm O.L.D. framesDirect mount chain ring12-speed Dyna-Sys compatible
The Shimano Deore FC-M6100-1 crank features an entirely new construction, using direct mount chainrings and special gear tooth profile for improved chain retention. The HollowTech II integrated bottom bracket design uses a wide bearing placement with a large axle diameter for increased stiffness, efficiency and added durability.Great value Deore M6100 2-piece design chainset for 12-speed Dyna-Sys MTB HG-X transmissionsForged crank arms rigid whilst being incredibly strong and durableLightweight aluminium chainringWe recommend that the bottom bracket is initially installed by a bike shop to ensure perfect facing and fit52 mm chain line for use with 135 /142 mm O.L.D. framesDirect mount chain ring12-speed Dyna-Sys compatible
The Shimano Deore FC-M6100-1 crank features an entirely new construction, using direct mount chainrings, special gear tooth profile for improved chain retention, and a 178 mm Q-factor that is compatible with 148 mm O.L.D. frames.Great value Deore M6120 2-piece design chainset for 12-speed Dyna-Sys MTB HG-X transmissionsForged crank arms rigid whilst being incredibly strong and durableHollowTech II integrated bottom bracket design uses a wide bearing placement with a large axle diameter for increased stiffness, efficiency and added durabilityLightweight aluminium chainringWe recommend that the bottom bracket is initially installed by a bike shop to ensure perfect facing and fit55 mm chain line for use with 148 mm O.L.D. framesDirect mount chain ring12-speed Dyna-Sys compatible
The Shimano Deore FC-M6100-1 crank features an entirely new construction, using direct mount chainrings, special gear tooth profile for improved chain retention, and a 178 mm Q-factor that is compatible with 148 mm O.L.D. frames.Great value Deore M6120 2-piece design chainset for 12-speed Dyna-Sys MTB HG-X transmissionsForged crank arms rigid whilst being incredibly strong and durableHollowTech II integrated bottom bracket design uses a wide bearing placement with a large axle diameter for increased stiffness, efficiency and added durabilityLightweight aluminium chainringWe recommend that the bottom bracket is initially installed by a bike shop to ensure perfect facing and fit55 mm chain line for use with 148 mm O.L.D. framesDirect mount chain ring12-speed Dyna-Sys compatible
The Shimano Deore FC-M6100-1 crank features an entirely new construction, using direct mount chainrings, special gear tooth profile for improved chain retention, and a 178 mm Q-factor that is compatible with 148 mm O.L.D. frames.Great value Deore M6120 2-piece design chainset for 12-speed Dyna-Sys MTB HG-X transmissionsForged crank arms rigid whilst being incredibly strong and durableHollowTech II integrated bottom bracket design uses a wide bearing placement with a large axle diameter for increased stiffness, efficiency and added durabilityLightweight aluminium chainringWe recommend that the bottom bracket is initially installed by a bike shop to ensure perfect facing and fit55 mm chain line for use with 148 mm O.L.D. framesDirect mount chain ring12-speed Dyna-Sys compatible