Attach the TOOO Cycling DVR80 Camera to your aero seat post thanks to the Aero Seat Post Mounting Adaptor. Simply position this adaptor on the aero seat post and place the DVR80 mounting bracket over it to ensure a secure fit.Size: (Height) 63mm (2.48") x (Width) 23mm (0.9") x (Aero Seat post width) 22-30 mm (0.86-1.18")
The Vybe is Ultimate USE s latest generation suspension seatpost with 50mm of active tuneable travel. It tames the trails increasing your power, endurance and comfort. The suspension of the Vybe reduces the effect of terrain on the body allowing energy to be concentrated on the pedals. Consistent seated pedaling allows for increased power and comfort so you ll finish your ride faster and fresher and ready to ride again.The Vybe features the SUMO clamp, the highly acclaimed, quick fitting, simple to adjust system designed to ensure the perfect saddle position (full range of saddle tilt available). All suspension seatposts are fully serviceable, adjustable for rider weight and give many years of loyal service with comfort, recovery and performance benefits. To achieve the optimum ride, choose your spring option from soft, medium or hard according to your weight. Please see the Shockpost Spring Options tab for more details. There is also a 'Pre-Load Adjustment' screw at the bottom of the post allowing you to fine tune the post to give you the ultimate ride.*Supplied with a standard 7x7mm clamp. Other size clamps to fit oval carbon rails are available. Please see the saddle manufacturers measurement, if the rails are wrapped please check the measurements are still valid.Material: AluminiumLength: 400mmSetback: 10mmFinish: UD MattApprox. Weight: 400 482g
Enjoyment can be in the simplest things. That is why using Urban Iki Front seats is made simple! Mounting the seat can be done in within just 5 minutes with the mounting materials. They come standard with the seat. No hassle! Just bike away in a few minutes. Age Range 9 months to 3 yearsWeight Range 9 to 15kgSafe 5-point belt harnessEasy belt adjustment with custom designed seat belt closureSoft shoulder paddingAdjustable footrests and foot strapsSoft rubber, water repellent seat cushionIntegrated drainageErgonomically shaped seatEasy to assemble with click and go mounting on stemTUV tested to EN14344 safety standardFits most ahead and Quill style stemsThe buckle on the 5-point safety belt is designed to open and close in an easy way by parents hands. And adjusting the footrests can be done with one hand. No problem keeping the bike steady when doing so. The Urban Iki is tested at their own testing facility to meet the high Japanese safety standards. Also, the independent German institute TUV tested and approved the Urban Iki Front seat according to EN14344 standard. Guaranteed safety!
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Material: T6-6061 AluminiumBar mounted paddle style remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismLength: 400mmTravel: 125mm (27.2mm = 105mm travel)Cable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 610g (30.9mm) w/o cable and paddle shifter (90g)Building on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the first image and are not suitable for use on bikes with 2X or 3X front gearing. The 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.
Replacement elastic ties for the DVR80 mounting bracket. This handy 4 pack of ties is great value and will get you out riding in case you misplace the originals from the box.
Deda's Zero100 Seatpost is one of the best value posts around, with a lightweight and durable 7050 3D forged aluminium construction and an easy to use 1-bolt head clamp system that allows for quick and precise saddle adjustment. The aluminium construction is both lightweight and strong, while the anodised finish is supremely stylish and gives a classy finish. The 1-bolt head clamp system is incredibly easy to use, making saddle adjustment quick and precise. The Zero100 offers a wide range of adjustment and is even compatible with an internal Di2 battery when used with Deda's adaptor (sold separately). For rider's looking for a great value, durable and lightweight seatpost, the Deda Zero100 is a great choice!
The Ascend Dropper Seatpost offers excellent performance and reliability without breaking the bank. Its compatible with bikes that can use an internally routed dropper. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Material: AL7075-T651Bar mounted shifter style remote leverInfinitely adjustableCable operatedInternal routing onlyLinkage mechanism eliminates any outer cable pullZero Offset Head typeOne Piece head/Upper ShaftMicro Adjust clamping mechanism30.9mm or 31.6mm Diameter410mm/480mm Length120mm or 150mm TravelCable Length: 1.5mSand Blasted and Hard Anodised Black2 Year WarrantyWeight: 550g W/O Cable and Shifter (31.6mm, 120mm)The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Please note that it cannot be converted to external cable actuated.
The Ascend Dropper Seatpost offers excellent performance and reliability without breaking the bank. Its compatible with bikes that can use an internally routed dropper. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Material: AL7075-T651Bar mounted shifter style remote leverInfinitely adjustableCable operatedInternal routing onlyLinkage mechanism eliminates any outer cable pullZero Offset Head typeOne Piece head/Upper ShaftMicro Adjust clamping mechanism30.9mm or 31.6mm Diameter410mm/480mm Length120mm or 150mm TravelCable Length: 1.5mSand Blasted and Hard Anodised Black2 Year WarrantyWeight: 550g W/O Cable and Shifter (31.6mm, 120mm)The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Please note that it cannot be converted to external cable actuated.
Have you got a bike with with no rear rack mountings, but want to fit a new rack M Part have the answer with this Seat Clamp Rack Mount that enables rear racks to be fitted where it wasn't previously possible. Easy to fit and use, this is a great choice if you want to fit a rack to your bike.
The Ascend Dropper Seatpost offers excellent performance and reliability without breaking the bank. Its compatible with bikes that can use an internally routed dropper. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Material: AL7075-T651Bar mounted shifter style remote leverInfinitely adjustableCable operatedInternal routing onlyLinkage mechanism eliminates any outer cable pullZero Offset Head typeOne Piece head/Upper ShaftMicro Adjust clamping mechanism30.9mm or 31.6mm Diameter410mm/480mm Length120mm or 150mm TravelCable Length: 1.5mSand Blasted and Hard Anodised Black2 Year WarrantyWeight: 550g W/O Cable and Shifter (31.6mm, 120mm)The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Please note that it cannot be converted to external cable actuated.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
Your child will love riding up front when they have their own handlebars and grips to hold onto.Accessory for the Shotgun Kids MTB seatAllen key fixing for easy fitting, removal and adjustment250mm in length, with rubber grips designed for little handsComes with inserts to fit 25.4mm, 31.8mm and 35mm handlebar diametersSuitable for flat or riser style handlebarsThe shotgun bars provide a warmer alternative for little hands, and stop your co-pilot from playing with your gears, brakes and dropper post!