Developed alongside World Cup mechanics and world champion racers. Peaty's Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tyre in temperate climates*. It won't ball up in the tyre and is easily washed out. Our biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6mm.Key FeaturesBiodegradable sealing fibres.,Biodegradable platelets.,CO2 compatible.,Seals up to 6mm holes.,Operating pressures: 15 to 120 psi.,Operating temperature: -20°c to +50°c.,Seals porous tyres and bead/rim gaps setup..Setup Instructions:Always ensure you have tubeless ready rims and tyres. For best results use with Peaty's Tubeless Rim Tape and Peaty's Tubeless Valves.1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles.,2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants.,3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim.,4. Deflate the tyre and, with the valve at the three o'clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve.,5. Re-insert the valve core and re-inflate the tyre to desired pressure.,6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor.,7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can't hear any more air loss.,8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water.,9. Check tyre pressures and ride!.Recommended minimum quantities per tyre:Road 30 - 45ml,CycloCross 60 - 75ml,26" MTB 60 - 80ml,27.5" MTB 70 - 90ml,29" MTB 100 - 120ml.For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities.* Always check sealant regularly and top up as required† If a seal can't be made, add more sealant in increments as required
For tyres up to 56mm (width), one 60ml dose of Schwalbe's Doc Blue Tubeless Sealant will deliver effective puncture protection for approximately three months.
Seals small slits faster and more permanently than any other sealant on the market. For use in tubeless tires, tubular and inner-tubes. Recommended Amount for 1 mountain bike wheel, tubeless, tubular or inner-tube: 60-120 ml for XCand CX wheels. 120-180 ml for AM, FR and DH tires.
WTB TCS Tubeless Tyre SealantClassed by WTB as its best option for quickly and confidently repairing ¼” (6mm) punctures, the brand went through five different formula revisions to ensure TCS Tubeless Tyre Sealant performs at its best. This sealant's unique formula cures sealant particulate within the puncture to create a flexible, long-lasting repair. TCS Tubeless Tyre Sealant is optimised for temperatures down to 15°F (-9.4°C), which increases sealing performance without altering the formula for extremely cold conditions. Synthetic latex minimises the risk of allergic reactions while also keeping the sealant fresh for many months of riding.Features: Use: Mountain Bike (MTB) Type: Tyre Sealant Size: Available in four sizes to selectTechnologies: Instantly seals punctures up to 1/4" (6mm). Ammonia-free formula stays fresh for months after installation. Optimised for temps down to 15F° (-9.4°C), which increases sealing performance without altering the formula for extremely cold conditions. Other sealants are rated for temps down to 0°F or below, but accepting higher minimum temps allowed us to improve sealing performance when used during the most common riding temps. Made with synthetic latex, which negates the risk of allergic reactions caused by natural latex. Water-based, light green colour tint. Designed to interact optimally with the compounds used in WTB tyres, but is also compatible with other tubeless tyres. Mica particulate seals within punctures using tackiers rather than relying on the evaporation process of harmful ammonia. This means TCS Tubeless Tyre Sealant performs consistently in harsh conditions where other sealants have trouble clotting due to minimal evaporation. Available in four sizes. 4oz, 8oz, 16oz, and 32oz. All bottles feature measuring gradients in both ounces and millilitres to easily determine how much sealant is being poured.Buy WTB Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
WTB TCS Tubeless Tyre SealantClassed by WTB as its best option for quickly and confidently repairing ¼” (6mm) punctures, the brand went through five different formula revisions to ensure TCS Tubeless Tyre Sealant performs at its best. This sealant's unique formula cures sealant particulate within the puncture to create a flexible, long-lasting repair. TCS Tubeless Tyre Sealant is optimised for temperatures down to 15°F (-9.4°C), which increases sealing performance without altering the formula for extremely cold conditions. Synthetic latex minimises the risk of allergic reactions while also keeping the sealant fresh for many months of riding.Features: Use: Mountain Bike (MTB) Type: Tyre Sealant Size: Available in four sizes to selectTechnologies: Instantly seals punctures up to 1/4" (6mm). Ammonia-free formula stays fresh for months after installation. Optimised for temps down to 15F° (-9.4°C), which increases sealing performance without altering the formula for extremely cold conditions. Other sealants are rated for temps down to 0°F or below, but accepting higher minimum temps allowed us to improve sealing performance when used during the most common riding temps. Made with synthetic latex, which negates the risk of allergic reactions caused by natural latex. Water-based, light green colour tint. Designed to interact optimally with the compounds used in WTB tyres, but is also compatible with other tubeless tyres. Mica particulate seals within punctures using tackiers rather than relying on the evaporation process of harmful ammonia. This means TCS Tubeless Tyre Sealant performs consistently in harsh conditions where other sealants have trouble clotting due to minimal evaporation. Available in four sizes. 4oz, 8oz, 16oz, and 32oz. All bottles feature measuring gradients in both ounces and millilitres to easily determine how much sealant is being poured.Buy WTB Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Joe's No Flats Elite Racer's SealantJoe's No Flats Elite Racer's SealantScientifically developed to meet the high demands of professional Mountain Bike racers. Instantly seals punctures in the tread up to 6mm.Seals small slits faster and more permanently than any other sealant on the market. For use in tubeless tires, tubular and inner-tubes. Recommended Amount for 1 mountain bike wheel, tubeless, tubular or inner-tube: 60-120 ml for XCand CX wheels. 120-180 ml for AM, FR and DH tires. For effective puncture resistance, add fresh sealant every 3-8 months. This bottle is good for 3-8 mountain bike wheels.Buy Joe's No Flats Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Puncture prevention sealantZ-Sealant was designed for preventing punctures.For use with an inner-tube it needs to be injected into the valve using the nozzle gived or into the side of the tyre for a tubeless system, helping to prevent punctures up to 3mm.The latex-based-formulation remains efficient for a minimum of 6 months. In case of hot weather, it is recommended to use Z-Sealant more regularly.The Z-Sealant formula contains less than 1% ammonia and won't damage your tyres.Shake before use.It won't freeze.Capacity : 1 ltr or 125ml (min 50ml per tyre)
Key Features:For all inflatable rubber tubes and tubeless tires.Contains 120ml and one small piece of valve tool for Schrader and Dunlop valves.Applicable for tire pressure under 60 PSI.Suggest replenishing after half year.One bottle fills 2 tires.
Muc-Off Glue and Tyre Sealant RemoverFeaturing a non-aggressive proprietary formula, this glue and sealant remover helps remove rim tape glue, sealant or tubular glue residue from inside rims (and many other surfaces) prior to applying Muc-Off Tubeless Rim Tape (available separately). Muc-Off has made it easy to use thanks to its spray-on aerosol design that's safe to use on most metal, plastic and carbon fibre surfaces. Ideal for keeping in your home workshop for when it's time to carry out maintenance on your wheelset. Going TubelessMuc-Off Glue & Sealant Remover is the perfect companion for preparing your rims for a tubeless setup. Removes Sealant ResidueThe non-aggressive formula is perfect for removing stubborn rim tape glue and sealant residue prior to applying Muc-Off Rim Tape. Removes Sticker AdhesiveIt's also perfect for removing sticker adhesive from your bike - whether you're building your bike straight out of the box or just switching up your decals! Easy to UseThe Glue & Sealant Remover comes in a handy spray aerosol which makes it super easy to dispense directly onto your rims whilst you work. Features: 200ml aerosol spray can Carbon Fibre safe Removes glue residue Removes sealant Easy to use A must have for anyone going tubelessManufacturer's Part Number: 20130 200mlBuy Muc-Off Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tubeless tyres are now commonplace in the world of cycling, and with their enviable reputation for their lubrication and cleaning products it was only a matter of time before Muc-Off entered the tubeless tyre sealant scene. The result is their new No Puncture Hassle Tubeless Sealant and boy has it been worth the wait!Suitable for downhill, enduro, trail, cross country, gravel, cyclocross and road useSeals tears and holes up to 6mm and helps seal porous tyres and bead/rim gapsLasts up to 6+ months and won't ball up like other sealantsUnique UV detection system highlights any puncturesBiodegradable, non-corrosive and easily washes off with waterDeveloped with the worlds best athletes, Muc-Off's No Puncture Hassle Tubeless Sealant uses cutting-edge microfibre molecules to fill bigger holes and tears in tyres up to 6mm, while the advanced latex forms a strong seal immediately, leading to minimal loss of air and allowing you to carry on riding like nothing happened! Suitable for use in tubeless ready or full UST wheels/tyres, the No Puncture Hassle Sealant can be used for any kind of riding, from extreme downhill to road cycling and lasts for up to 6 months! It also works with a wide range of pressures from 15 120 psi and in temperatures ranging from -20 to +50 degrees. The sealant is also biodegradable, non-corrosive and easily washes off surfaces with water.The 140ml Sealant Kit includes a few nifty extras to get the most out of the sealant. The 140ml pouch fits directly onto presta valves, and the included valve core removal tool makes installation easy. A UV light key ring is also included, to help find any punctures. Muc-Off might not be the first brand to release a tyre sealant, but the No Hassle Puncture Tyre Sealant is one of the best you can buy!
Sealant filled butyl tubes for everyday commuting or training. Auto fix tubes are made with high quality synthetic rubber with a wall thickness of 0.9 mm and filled with a specific sealant to seal punctures within seconds. The sealant improves the air retention. Available with Presta or Schrader valve in all common sizes Butyl tubes filled with sealant, It seals punctures within seconds, Sealant improves air retention.Key Features:Material: Butyl, Valve: Schrader/Presta, Core: RVC 48mm.
We went through five different formula revisions to ensure TCS Tubeless Tire Sealant is the best option for quickly and confidently repairing ¼” (6mm) punctures. Our unique formula cures sealant particulate within the puncture to create a flexible, long-lasting repair.Usage: Tubeless TiresKey Features:Optimized For Temps Down To 15f° (-9.4°C) - We made sure our sealant performs best in the most common riding temperatures. An undesirable amount of antifreeze is required in order to ensure a sealant performs properly at extremely low temperatures. Accepting higher minimum temps allowed WTB to improve sealing performance by reducing the amount of antifreeze and replacing it with additional synthetic latex.,Ammonia-Free - TCS Tubeless Tire Sealant uses a tackifying process to seal punctures rather than relying on the evaporative effects of many ammonia-based formulas. As a result, our sealant performs better in wet, unforgiving conditions where other sealants have trouble clotting due to reduced evaporation.,Synthetic Latex - Synthetic latex reduces the risk of an allergic reaction for individuals with allergies to natural latex products. Synthetic latex also keeps the sealant fresh for many months of riding.,Completes The Tcs Tubeless System - TCS Tubeless Tire Sealant is a dependable, thoroughly-tested sealant formula that completes WTB’s patented TCS system of tubeless tires, rims, wheels, valves, tape and sealant. TCS (Tubeless Compatible System) is our standardized tubeless rim/tire system designed to meet international ETRTO standards and deliver unbeatable reliability..Seals InstantlyWe made sure TCS Tubeless Tire Sealant is able to quickly seal puncture caused by anything you may encounter out on the trail. Mica particulate seals within punctures using tackifiers rather than relying on the evaporation process of harmful ammonia. This means TCS Tubeless Tire Sealant performs consistently in harsh conditions where other sealants have trouble clotting due to minimal evaporation.