Key Features:For all inflatable rubber tubes and tubeless tires.Contains 120ml and one small piece of valve tool for Schrader and Dunlop valves.Applicable for tire pressure under 60 PSI.Suggest replenishing after half year.One bottle fills 2 tires.
Silca Ultimate Tubeless Sealant combines the power of carbon fibre with a long lasting natural latex formula to achieve sealing properties beyond that of special race day formulas, while matching or exceeding the life expectancy of long-lasting formulas.The key is a high percentage fill of recycled, chopped carbon fibre strands which are held in suspension by the foaming action of the sealant within the tire. Upon puncture, the sealant rushes to escape the hole, carrying thousands of carbon filaments which serve to dam up the opening, just like sticks of a beaver dam blocking a stream. This dam of fibre collects more fibre and what was one large hole, is now turned into hundreds of smaller holes for the sealant to seal. Fiberfoam technology has proven to seal up to 7.5mm holes and cuts at gravel pressures and up to 5mm holes at higher road pressures. Even better, the carbon fibre/latex plug formed at the puncture has proven to be more than twice as strong over time as latex only or latex with crystals or glitter. While most sealants claim they can plug holes up to 6+mm, they can also be injected into the tyre through the 3mm hole in your valve stem with some injectors using tips as small as 2mm. The power of carbon fibre makes this impossible, Silca Ultimate Tubeless Sealant will instantly plug your injection syringe or your valve as the fibres stack up to block the opening. In solving this issue, the Silca team has developed Ultimate Tubeless Sealant into a system that will save you time and money in the long run. The initial installation of Silca Ultimate Tubeless Sealant must be done by pouring into the tyre cavity rather than injecting through the valve. However, unlike other sealants which must be completely replaced every 3-6 months, Silca Ultimate Tubeless Sealant has a special Replenisher which can be pumped through the valve and can extend the sealant life to well over 1 year depending on your climate. This means less wasted sealant, and less hassle over time as there is no need to remove the old sealant at each service interval, in many cases, the sealant may outlast the tyre.
Developed alongside World Cup mechanics and world champion racers. Peaty's Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tyre in temperate climates*. It won't ball up in the tyre and is easily washed out. Our biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6mm.Key FeaturesBiodegradable sealing fibres.,Biodegradable platelets.,CO2 compatible.,Seals up to 6mm holes.,Operating pressures: 15 to 120 psi.,Operating temperature: -20°c to +50°c.,Seals porous tyres and bead/rim gaps setup..Setup Instructions:Always ensure you have tubeless ready rims and tyres. For best results use with Peaty's Tubeless Rim Tape and Peaty's Tubeless Valves.1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles.,2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants.,3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim.,4. Deflate the tyre and, with the valve at the three o'clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve.,5. Re-insert the valve core and re-inflate the tyre to desired pressure.,6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor.,7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can't hear any more air loss.,8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water.,9. Check tyre pressures and ride!.Recommended minimum quantities per tyre:Road 30 - 45ml,CycloCross 60 - 75ml,26" MTB 60 - 80ml,27.5" MTB 70 - 90ml,29" MTB 100 - 120ml.For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities.* Always check sealant regularly and top up as required† If a seal can't be made, add more sealant in increments as required
Sealant filled butyl tubes for everyday commuting or training. Auto fix tubes are made with high quality synthetic rubber with a wall thickness of 0.9 mm and filled with a specific sealant to seal punctures within seconds. The sealant improves the air retention. Available with Presta or Schrader valve in all common sizes Butyl tubes filled with sealant, It seals punctures within seconds, Sealant improves air retention.Key Features:Material: Butyl, Valve: Schrader/Presta, Core: RVC 48mm.
The revolutionary tubeless kit that converts any mountain bike wheel into tubeless.This tubeless kit is the most important upgrade available for a dedicated cyclist, it allows a safe conversion of standard wheels into tubeless!Key features:One size fits all. Rims up to 40 mm inner width,Easily fits any rim size – 29”, 27.5” & 26”,Contains a unique “tear & fit” rubber rim strip.Each kit contains all the components needed to convert two wheels:2x 125ml sealant bottles,2x “Tear & Fit” rubber Rim strips,2x Presta valves ,1x Rim tape for two wheels (two revolutions),1x Valve core,1x Valve key,1x Presta to Schrader valve adapter,1x Easy tubeless assembly wet wipe.
Joe's No Flats E-Bike Self Sealing tube. Each tube is pre-filled with our Joe's Super Sealant.High quality heavy duty tubes especially designed for the E-bikes and urban rides.,All tubes come with 48 mm valves.,Instantly stops punctures – up to 3 mm.,Long shelf life – up to 3 years.,No maintenance required, efficient up to 2 years..
Road Self-sealing Tubes pre-filled with Joe’s Road Racing SealantKey features:High-quality tubes prefilled with 50 grams of Joe’s Road Racing Sealant,Compatible with air pressures up to 120 PSI,Instantly stops punctures – up to 3mm,No maintenance required, efficient up to 2 years,COâ‚‚ compatible.
MTB Bike Self-sealing Tubes pre-filled with Joe’s Super SealantKey features:High-quality tubes,Instantly stops punctures – up to 3mm,No maintenance required, efficient up to 2 years,COâ‚‚ compatible.
The original sealant from Orange Seal. Instantly seals punctures up to 6mm and slices up to 19mm long. Lasts up to 45 days between top-ups and performs down to -11 degrees Celsius.Key Features:Seals punctures up to 6mm,Seals slices up to 19mm,Seals tyres with porous sidewalls,Works down to -11°c,Last on average 30-45 days between top ups,No corrosive formula,Also great for inner tubes,Available with applicator injector or as a refill bottle..How much sealant do you need?Road tyres: 1-2oz per tyre,MTB 26": 3oz per tyre,MTB 27.5": 3oz per tyre,MTB 29": 4oz per tyre,Fat Bike: 6-8oz per tyre.
Formulated to maximize longevity. Orange Seal Endurance lasts up to 120 days between top-ups and performs down to -23 degrees Celsius. Endurance sealant will instantly seal punctures up to 3mm and slices up to 12mm.Key Features:Seals punctures upto 3mm,Seals slices upto 12mm,Seals tyres with porous sidewalls,Works down to -23°c,Last on average 60-120 days between top ups,No corrosive formula,Also great for inner tubes,Available with applicator injector or as a refill bottle..How much sealant do you need?Road tyres: 1-2oz per tyre,MTB 26": 3oz per tyre,MTB 27.5": 3oz per tyre,MTB 29": 4oz per tyre,Fat Bike: 6-8oz per tyre.
Sometimes, the only thing that matters is one run, one epic day or one Enduro stage. The Podium Sealant was designed exactly for this purpose. To bring the racer to the finish line under the roughest conditions. As a race day tubeless sealant for MTB, The Podium Sealant it is faster than any other sealant in the market and will seal holes and cuts up to 10mm.Race day sealant for professional MTB riders for ultra-high performance.,Instantly seals punctures - up to 10mm.,Seals holes and cuts.,Designed specifically for Tubeless Ready tires in tough conditions.,CO2 Compatible.,Prevents air leaks from thin tire side walls.,Ultra high performance - Up to 300km.,High performance 300-1000km.,Standard performance (Joe’s No Flats’ Eco/Super Sealant equivalent) - over 1000km.,Wide temperatures range (-5ºC - +50ºC) compatibility.,Wide pressures range (15PSI - 100PSI) compatibility.,Recommended amount for 1 mountain bike wheel: 120 ml.,125ml per bottle,6 pack display only available when 6 bottles purchased.
Formulated to maximize longevity. Orange Seal Endurance lasts up to 120 days between top-ups and performs down to -23 degrees Celsius. Endurance sealant will instantly seal punctures up to 3mm and slices up to 12mm.Key Features:Seals punctures upto 3mm,Seals slices upto 12mm,Seals tyres with porous sidewalls,Works down to -23°c,Last on average 60-120 days between top ups,No corrosive formula,Also great for inner tubes,Available with applicator injector or as a refill bottle..How much sealant do you need?Road tyres: 1-2oz per tyre,MTB 26": 3oz per tyre,MTB 27.5": 3oz per tyre,MTB 29": 4oz per tyre,Fat Bike: 6-8oz per tyre.