Fox Suspension Fork Low Friction No Flange Seal KitReduce friction and enhance the suspension performance of your Fox suspension fork with this Low Friction No Flange Seal Kit. The ideal replacement kit to help tune up your front suspension or keep for spares in times of emergency. Simple to fit, these seals prevent your tubes from getting wet and helps prolong their longevity. Features:Use: Mountain BikeCompatibility: Fox 36 ForkSizes: 32mm, 34mm, 36mm, 40mmManufacturer Part Numbers:Black n/a 36mm n/a: 803-00-933Black n/a 34mm n/a: 803-00-945Black n/a 40mm n/a: 803-00-946Black n/a 32mm n/a: 803-00-944Buy Fox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
An Overshoe Ready for Long, Hard RidesWet and cold feet while riding can be the worst, use our All Weather Open Sole Cycle Overshoes to keep your shoes and feet dry and protected during wind, rain, and puddles. They're an ideal choice when you might encounter wet weather whilst commuting or road cycling.Designed with the Cyclist in MindThis lightweight, All Weather Open Sole Overshoe is designed for use with road cycle shoes to keep your feet dry and protected. Featuring a Kevlar® heel and toe for durability, reflective detailing for added visibility in low light, and a rear zipper with pull loop for quick on and off.
The original, 100% waterproof, windproof & breathable mid length sock featuring Hydrostop. Perfect for use in a wide variety of weather conditions.Key Features:Waterproof - three layer construction for warmth, durability and waterproofing,Comfort - Merino wool lining for moisture control, insulation and comfort,Hydrostop - Reduces water ingress,Support - zonal elastication for added support,Comfort - flat toe seams prevent rubbing,Comfort - Footbed padding reduces pressure and absorbs shock,Hydrostop Usage Guide - SealSkinz Hydrostop technology creates a seal between the sock cuff and skin, helping to reduce the amount of water from running down the leg and into the sock. Due to this close bond between sock cuff and skin, we recommend that Hydrostop socks are only used outdoors and not for a prolonged period of time. Incorrect or prolonged use can result in excessive rubbing against the skin and may in a very small minority of cases cause minor skin irritation. The Hydrostop seal material has been fully tested to EN ISO 10993-5: 2009 and is OEKOTEX compliant..
Jagwire Road Elite Sealed Gear Cable KitThis top-quality sealed gear kit uses a continuous liner that seals the system completely protecting it against dirt, mud and debris. To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Speed-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect.Features: Housing Construction: XEX Outside Diameter: 5.0mm Housing Length: 1700mm Liner: Speed-Lube Liner Length: 2225mm Cable Construction: STS-LF Polymer-coated Slick Stainless Compatibility: SRAM or Shimano road brakes Front Cable Length: 2300mm Rear Cable Length: 2300mm Includes: 1x 1700mm XEX shift housing 2x 2225mm Speed-Lube liners 2x 2300mm STS-LF Polymer-coated shift inner cables 2x LEX-SD 4mm shift housing segments, 300mm 3x open Brass end caps 4x open Alloy end caps for 5mm housing 2x open Alloy end caps for 4mm housing 2x pro indexed inline adjusters (4mm/5mm) 2x housing connectors (4mm/5mm) 2x non-crimp cable tips 2x grub seals 2x 5G Tube Tops 2x Rotating Hooks Technologies: XEX: Lightweight, braided steel strands around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-LF: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance.Buy Jagwire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Continental RevoSealant Tyre SealantThe Continental RevoSealant is replacement tyre sealant for tubeless tyres that can be used on both MTB and Road bikes.For years Continental tyre sealants have been replacing the spare tyre in many vehicles. This technology has now been further enhanced specially to meet the requirements for use in bicycles and tubes.The ammonium and protein-free RevoSealant provides reliable sealing for punctures and small cuts without chemically corroding the tyre or tube.The versatile RevoSealant is not only useful for repairs but can also be used as a preventive measure in tubes, tubular tyres and tubeless tyres. With suitable tyres, RevoSealant can also be used as a sealant for the Tubeless Ready systems which are popular on MTB's. RevoSealant, which is specially optimised for use in Continental cycle tyres, can be used in temperatures as low as -20° Celsius. Please carefully follow the accompanying assembly instructions.FeaturesEasy to useSuitable for Road or MTB useFits Presta Valves (inner tube valve must have removable core and must be removed first)Buy Continental Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
If you've walked the mechanics' pits at any National or International level event chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker letters and numbers formula notes by the man himself Stan Koziatek.For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit we've developed a proprietary sealant formula with close to twice the amount of our standard sealing crystals plus our special 'XL' crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture allowing for an entirely new level of sealing performance.This is the next level in sealing power from the people who invented tubeless conversions and made tubeless readily available to the masses. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities the Race Sealant will clog injectors and smaller bottles almost immediately.We are now making our Race Sealant available to riders everywhere. Stan's Race Sealant is only available by the quart.Features:• Ride the widest range of conditions and temperatures - Premium low-viscosity latex coats the tire’s sidewalls for quicker sealing• Faster and better sealing capabilities to keep you rolling - Twice the sealing crystals compared to the standard sealant• Seals larger punctures to get you home or to the finish line - “XL” crystals and standard crystals combine to seal larger punctures• Safe for the environment - Comprised of natural materials
To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Speed-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect. Technologies: XEX: Lightweight, braided steel strands around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-LF: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance. What's Included: (1) 1700mm XEX Shift Housing (2) 2225mm Speed-Lube Liners (2) 2300mm STS-LF Polymer-coated Shift Inner Cables (2) LEX-SD 4mm Shift Housing Segments, 300mm (3) Open Brass End Caps (4) Open Alloy End Caps for 5mm Housing (2) Open Alloy End Caps for 4mm Housing (2) Pro Indexed Inline Adjusters (4mm/5mm) (2) Housing Connectors (4mm/5mm) (2) Non-Crimp Cable Tips (2) Grub Seals (2) 5G Tube Tops (2) Rotating Hooks
Premium protection for the very youngest of bike riders, the PNut from Lazer is designed to protect and provide superior comfort, whether they re travelling in a baby seat, trailer or cargo bike. The self-adjusting EZ Fit system ensures an enhanced fit and the child-friendly side buckle results in stress-free unclipping.Kid friendly fit: The Lazer Kidfit system is an automatic fitting system which provides a secure fit for improved protection and more comfort for your childNo more skin pinch: A cleverly positioned buckle on the child's cheek rather than under the chin to avoid painful pinches of skin under the chinNo more insects: An insect net stops bugs from flying into the helmet's front vents, minimising distractions, or irritationsTemple coverage: An extra level of protection across the skull's most sensitive area, boosting safety, comfort, and confidenceBaby seat-ready: The helmet shape is flatter at the back so your child can keep their head up and enjoy the rideLightweight: 14% lighter than P'nut MIPS CEReduced Plastics: 40g less plastics used than in P'nut CELED light compatibility: Increase safety and visibility by attaching the Universal Lazer LED at the rear of the helmet via the Velcro MountWeight: 250gOne Size: 46-50 cm
Allows use of all Race Face, Shimano and select FSA 24mm diameter spindle cranksets (MTN or ROAD) in 41mm diameter Press-Fit (Shimano Type) BB Shell Frames. Key Features: Precision CNC machined and anodized aluminum alloy cups., More accurate, durable and stable press-fit interfaces than the competitors' molded plastic parts., Serviceable bearing design.,. Specification: Built for: XC / AM / ROAD, Compatibility: Fits any of the following 41mm diameter Press-Fit BB Shells:, BB92 (92mm Asymmetric MTN),BB89.5 (89.5mm Symmetric MTN),BB86.5 (86.5mm Symmetric ROAD), ..
CamelBak Mini Mule Hydration PackThe Mini M.U.L.E is the ultimate young riders' hydration pack from CamelBak that lets them carry the essentials when heading out with their parents.This hydration pack has grownup features such as 1.5 litres of water, a bike tool organiser pocket, zippered compartments for layers and essentials, and reflective strips, all in a package that fits younger riders.The Mini M.U.L.E also features a built-in whistle for emergencies and adjustable straps, allowing the hydration pack to grow with the kids over the years.Features:Material: 70D Diamond Clarus, 210D NylonTotal Capacity: 1.5L + 1.5L reservoirBike tool organiser pocketReflective stripSafety flasher loopSternum strap whistleHarness: Kids fit lightweight mesh with slider sternum strapBack Panel: Slit meshTorso Length: 30cm1/4 turn - easy open/close capLightweight fillportDryer armsCentre baffling and low-profile designPatented Big Bite valveHydroGuard technologyPureFlow tubeEasy-to-clean wide-mouth openingDesigned to Carry: Snack, sunscreen, phone, cash, keysCamelBak Got Your Bak Guarantee: If CamelBak built it, CamelBak will Bak it with their lifetime guaranteeWeight: 240g (pack only)Buy CamelBak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Squirt Tyre Sealant (1000ml)This high-quality sealant uses latex, microfibres and BeadBlock granules to seal up punctures from objects with a 6mm diameter. As a result, you'll benefit from quick and dependable protection thanks to its ammonia-free, long-lasting formula. This large 1000ml sized bottle is ideal for your home workshop or for bike mechanics and it has been tested by many pro-riders under harsh Cape Epic Mountain Bike Race conditions.Squirt Cycling Products is proud to announce the launch of Squirt SEAL Tyre Sealant with BeadBlock, a tyre sealant for both tubed and tubeless wheels, which provides superior puncture sealing properties while boasting a long lifespan and environmentally non-hazardous formulation. Like all Squirt Cycling Products, Squirt SEAL Tyre Sealant with BeadBlock has already been extensively tested in racing conditions and Squirt Cycling Products is confident it will enhance your cycling experience.Important Information:- Contains corrosion inhibitors- Seals punctures from objects with a 6mm diameter (Squirt Sealant with BeadBlock)- Will not dry out prematurely or permit tyre walls to stick together- Suitable for use from -20°C to 40°C- Tested and proven best by Daniel Geismeyr (Team Centurion Vaude), Ariane Luthi (Team Spur Specialized), Rudi Van Houts (3 x Dutch Olympic XCO), Raphael Gagne (Canadian Cup Champion), under harsh Cape Epic Mountain Bike Race conditions- 1000ml size is applied into the unseated tyreFeatures: Size: 1000ml Multi-method sealing Latex, Microfibres and BeadBlock Granules Ammonia-Free Longer lasting Easier to clean Minimal to zero bioaccumulation in the environmentBuy Squirt Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Enduro HyGlide hybrid seals combine the best of both worlds, oil retention and dirt/debris rejection. This design provides world-class performance in a long-lasting seal and delivers smooth action throughout the entire travel of the fork. This unique design joins the oil seal and wiper into a single unit, creating an ideal fork seal.The integrated top wiper is produced using a specific formulated polyurethane material, rather than a rubber compound that many fork seal manufacturers use. Our poly wiper/seal is a proper wiper keeping dirt and the elements out. In testing it is 300% more effective than a rubber wiper with garter spring used by many leading seal manufacturers. The co-molded oil seal below is made from Polyacrilate, the perfect material for the extreme operating temperatures and high pressures. The oil seal is also infused with MOS2 (Molybdenum Disulphide), a dry lubricant similar to graphite. While this is is the optimal material for the oil seal, it is separate in its duties from the upper wiper and is the reason for combining materials in to one hybrid seal.This cold-fused design allows the elimination of 1 sealing lip and further decreases the friction or “stiction” as referred to regarding fork movement. Between the two sealing lips, we have designed a large cavity area to hold lubricant to again prevent contamination and easy movement of the reciprocating fork producing more active suspension.With superior sealing action and cleaner fork lowers, your fork service intervals can be increased we find by 2 or 3 times compared to what the OE recommends. The HyGlide integrated wiper and oil seal provide much easier installation. No more fussing with a very thin lower seal that is fragile and easily bent when trying to install.