The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
Easy to fit, this secure bike mount is compatible with most fork dropouts and axle sizes. Simply choose the appropriate HUSKE Plugs for your bike's front fork dropouts, and you're all set for your next cycling journey and two-wheeled adventure. The Monkey Bar Bike Fork Mount is the accessory everyone has been waiting for, and it is finally here. The Monkey Bar Fork Mount is compatible with the HUSKE fork mount system and clamps onto your Monkey Bars front mount bar and your bike's rear-wheel tray clamps onto the rear mount bar. This mounting system means your bike is now able to be safely and stylishly transported on top of your Monkey Bars. Choose the appropriate HUSKE Plugs for your bike's front fork dropouts and you're ready to hit the road.
Light and packable for minimalist fast hikes, the Ultralight Self-Inflating mats come in at 1 inch thick with the regular size weighing just over 1 pound. The sleeping mat keeps weight down by using a 30-D polyester and Delta Core-V™ vertical coring which keeps body contact areas warmer while still offering great support and packability.
SeaSucker Monkey Bar Bike Fork MountThe SeaSucker Monkey Bar Fork Mount system means your bike is now able to be carried safely and stylishly on top of car. Easy to fit, this secure bike mount is compatible with most fork dropouts and axle sizes. Simply choose the appropriate HUSKE Plugs for your bike's front fork dropouts, and you're all set for your next cycling journey and two-wheeled adventure.The Monkey Bar Bike Fork Mount is the accessory everyone has been waiting for, and it is finally here. The Monkey Bar Fork Mount is compatible with the HUSKE fork mount system and clamps onto your Monkey Bars front mount bar and your bike's rear-wheel tray clamps onto the rear mount bar. This mounting system means your bike is now able to be safely and stylishly transported on top of your Monkey Bars. Choose the appropriate HUSKE Plugs for your bike's front fork dropouts and you're ready to hit the road.Features: Strong and Durable Fork Dropout Car Mount Compatible with the SeaSucker Monkey Bar Fork Mount systemBuy SeaSucker Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stay completely focused when riding in cool conditions. The Core Seamless Long Sleeve Base Layer has a totally seamless design so there is no niggling discomforts even under race-fit, aero jerseys.The base layer is made from a mix of polyester and polypropylene to create an exceptionally stretchy fit so your freedom of movement is unencumbered. The blend of yarns is also soft to the touch, warm, and high wicking for when the tempo increases and your body is working harder. Light weight sections on the side and back reduce bulk where you don’t need quite so much insulation and help give the base layer its almost unnoticeable feel when you’ve got it on. A wide neck sits easily under short-collared jerseys. Key Features: 84% polyester/16% polypropylene yarns provide softness, warmth, wicking, and exceptional stretch fit,Seamless construction means extra comfort,Lighter weight on side and back,Wide neck opening to fit under short-collared jerseys,4° – 16°C / 39° – 61°F,Weight: 194g (Large).
Shimano Ultegra R8010 DM Brake Caliper - AUShips from Australia - Estimated delivery in 2-4 business days.This Shimano Ultegra R8010 Caliper comes with a new slender design and has wider clearance than the earlier 6800 series to make it compatible with larger tyres, such as 28C. The Ultegra R8010 Caliper connects directly to the frame, which reduces weights by stripping the number of parts and boosts overall braking performance.Features: Brake Tyre: Direct mount Mounts directly to the frame to reduce redundant parts Increases overall braking performance Narrower gap between arms Compatible with wider 28c tyres Sleek designA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
A great alternative to panniers or a backpack. Ideal for overnight trips but also works well for commuting or long day tripsExtra large capacity seat pack-Removable and weather resistant stuff bag-Adjusts easily to larger or smaller volume cargo-Mounts quickly on almost any bike-Also works with many standard dry bags-70D Nylon 4mm Ripstop with water resistant treatment and backing-Volume: 10.5 Liters-Weight: 516 Grams-Part# 7057377
The Plummet seat post will change your riding style completely. You will be dropping your saddle on the fly and hitting technical sections faster than you ever have.Key Features:30.9mm/31.6mm x 420mm Dropper seat post,125mm drop with infinate adjustability,Air free design,Hydraulically damped,Cable operated handlebar remote,Dual bolt inline saddle clamp,750g including cable & remote.
The Plummet seat post will change your riding style completely. You will be dropping your saddle on the fly and hitting technical sections faster than you ever have.Key Features:30.9mm/31.6mm x 441mm Dropper seat post,125mm drop with infinate adjustability,Air free design,Hydraulically damped,Under bar cable operated handlebar remote for 1x gear systems,Dual bolt inline saddle clamp,750g including cable & remote,Internally routed.
Chromoly cranks from Salt. The salt rookie cranks feature heattreated arms and comes with hardware to fit either mid or USA sized bottom brackets. ###section### Product Specs Crank Type:3pc Spindle Diameter:19mm Includes BB:Yes Weight:1303g / 45.96oz ###shogun-image-section###
The Pro Vibe Di2 Alloy Seatpost is a high-performance seatpost as used by top professional riders. The one-piece 3D forged 2014 alloy construction makes the seatpost lightweight and strong. The innovative single bolt clamp design, also made of 2014 forged aluminium, is both easy to use and very secure. The Vibe has been developed with Di2 in mind and is internal battery compatible, offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. The rear of the shaft features a handy height-indicator allowing for quick setup. Inline or 20mm offset options are available.Lightweight 3D forged 2014 alloy constructionInnovative 1 bolt clamping systemHeight-indicator on the rearInline or 20mm offset optionsLength: 350mmApprox. Weight: From 234g