Nukeproof Horizon V2 Wheel ARD and Sealant BundleComing equipped with the brand's extensively trailed and tested alloy blend, this wheelset features a rim construction that's specifically made to meet the demands of both enduro and downhill (DH) riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, it gives you the best of both worlds in terms of strength, stiffness and weight.Both rims have the same profile, but the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this wheelset. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time penetrating. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThe Nukeproof Horizon V2 rear hub has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future.The 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with its louder pawls and springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included?Wheels come taped with a tubeless valve installed, so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.A pair of ARD inserts are also supplied to give you maximum protection and there is a 500ml bottle of lifeline sealant in the box too, all you need to do is add your favourite tyres.By using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you a much-increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.Features: Rim Material: Alloy Nukeproof Blend Use: Mountain Bike (MTB), All Mountain (AM), Enduro and Downhill (DH) Axle Spacing: Front: 15x110mm; Rear 12x148mm Rim Width: Inner: 30mm; 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Brake Rotor Compatibility: 6-bolt disc brake Conversion Options: 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD (choose freehub option from the menu) Rear Hub Engagement: 102 points of engagement (every 3.52°) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Build: Hand built Supplied with: Pair of wheels, valves, pre-taped, pair of ARD tyre inserts, 500ml bottle of Lifeline sealant Single or Pair: Pair Weight: Front: 897g; Rear: 1146g, ARD: 144g each (Weights include tape & valve)A full range of spares are available to service your hub in the future.141mm rear conversion kit for HG / XD freehubs available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR Manufacturer's Part Numbers: NUKHOR2021BF29HG Black HG 29" NUKHOR2021BF29XD Black XD 29" NUKHOR2021BF29MS Black MS 29" NUKHOR2021BF275HG Black HG 27.5" NUKHOR2021BF275XD Black XD 27.5" NUKHOR2021BF275MS Black MS 27.5"Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The race-proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, and notably reduced extended length ÔÇô the new transfer post is ready to rise to any occasion. Sizes: Diameter Sizes - 30.9/31.6mm Metric Sizes - 100mm/125mm/150mm/175mm Routing - Internal Only Lower Coating - Powdercoat Black Upper Coating - Kashima Coat Specs and Family Features: Patent-pending clamp design dramatically reduces stack height Proven Transfer internals with even easier serviceability than 2020 model 25g lighter than 2020 Transfer NEW lightweight under-bar 1x lever design – or existing 2x lever - Purchased separately Updated design Reduced overall length and insertion depth: 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction
The race-proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, and notably reduced extended length ÔÇô the new transfer post is ready to rise to any occasion. Sizes: Diameter Sizes - 30.9/31.6mm Metric Sizes - 100mm/125mm/150mm/175mm Routing - Internal Only Lower Coating - Powdercoat Black Upper Coating - Kashima Coat Specs and Family Features: Patent-pending clamp design dramatically reduces stack height Proven Transfer internals with even easier serviceability than 2020 model 25g lighter than 2020 Transfer NEW lightweight under-bar 1x lever design – or existing 2x lever - Purchased separately Updated design Reduced overall length and insertion depth: 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
The proven Transfer seatpost gets lighter and tighter for 2021. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Factory says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.Diameter Sizes: 30.9 / 31.6Metric Sizes: 100mm / 125mm / 150mm / 175mmPatent-pending clamp design dramatically reduces stack heightProven Transfer internals with even easier serviceability than 2020 model25g lighter than 2020 TransferNEW lightweight under-bar 1x lever design included1x lever is Matchmaker and I-SPEC EV compatibleUpdated designPlease note: Lever is not included and must be purchased separatelyReduced overall length and insertion depth:175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reductionExternal Length: 100mm Drop 308.6mm Max Insertion: 195.3mm125mm Drop 363.5mm Max Insertion: 228.2mm150mm Drop 418.3mm Max Insertion: 258.0mm175mm Drop 475.1mm - Max Insertion: 289.9mm
Race-pedigree technology comes to gravel the EA90 AX dropper brings your gravity gravel up to the next level. Featuring bulletproof DOSS-style mechanical internals with quiet operation thanks to spring guides, 2-position execution, and cable attachment from either direction for easy compatibility with all levers. Pair it with our Easton gravel dropper lever for a streamlined look. Features:Two positions; full up or full downBulletproof DOSS-style mechanical internals with spring guides for quiet operationCable attaches from either direction for compatibility with all dropper leversNew dual action drop-bar lever (sold separately) can be activated from the hoods or drops without compromising hand positionSpecification:Weight: 337gDiameter: 27.2mmMaterial: EC90 AlloyDrop: 50mm (350) / 70mm (370)Length: 350mm / 370mm
We’ve taken the RockShox Reverb family to new heights, recently with Reverb AXS™, and now with the new Reverb Stealth. Redesigned internals provide effortless actuation and increased reliability featuring new Vent Valve Technology. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. FEATURES NEW Features Vent Valve Technology for super simple service if the need arises NEW Travel options 175mm and 200mm NEW Shorter overall post length Stealth Internal cable routing Standard and 1X remote options
The adjustability and strength of a Thomson seatpost, now in Titanium.Proven saddle clamps are paired with Titanium hardware. It has a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than this grip length.The Thomson seatpost has a clamp, head and upper tube are strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°.Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails.The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.Key Features: 41mm seat rail grip length., Tilt adjustment between -5° and +29°., Low profile seat clamps., 27.2mm Diameter., Available in 350mm and 410mm lengths..
Race-pedigree technology comes to gravel the EA90 AX dropper brings your gravity gravel up to the next level. Featuring bulletproof DOSS-style mechanical internals with quiet operation thanks to spring guides, 2-position execution, and cable attachment from either direction for easy compatibility with all levers. Pair it with our Easton gravel dropper lever for a streamlined look. Features:Two positions; full up or full downBulletproof DOSS-style mechanical internals with spring guides for quiet operationCable attaches from either direction for compatibility with all dropper leversNew dual action drop-bar lever (sold separately) can be activated from the hoods or drops without compromising hand positionSpecification:Weight: 337gDiameter: 27.2mmMaterial: EC90 AlloyDrop: 50mm (350) / 70mm (370)Length: 350mm / 370mm