The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
Ritchey WCS 1 Bolt SeatpostThe WCS 1 Bolt Seatpost features Ritchey's unique "Sidebinder" single bolt clamp design, which provides quick and secure engagement. Also, its wide saddle clamp plate reduces stress on lightweight hollow saddle rails. This model also features 20mm of offset to help you obtain that aero race position.Features: Material: 3D forged TR741 Aluminium shaft and clamp Low-profile head Wide saddle clamp Rail Clamp Size: 7x7mm Offset: 20mm Weight: 195g (27.2mm, 350mm)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tubeless tyres are now commonplace in the world of cycling, and with their enviable reputation for their lubrication and cleaning products it was only a matter of time before Muc-Off entered the tubeless tyre sealant scene. The result is their new No Puncture Hassle Tubeless Sealant and boy has it been worth the wait!Suitable for downhill, enduro, trail, cross country, gravel, cyclocross and road useSeals tears and holes up to 6mm and helps seal porous tyres and bead/rim gapsLasts up to 6+ months and won't ball up like other sealantsUnique UV detection system highlights any puncturesBiodegradable, non-corrosive and easily washes off with waterDeveloped with the worlds best atheletes, Muc-Off's No Puncture Hassle Tubeless Sealant uses cutting-edge microfibre molecules to fill bigger holes and tears in tyres up to 6mm, while the advanced latex forms a strong seal immediately, leading to minimal loss of air and allowing you to carry on riding like nothing happened! Suitable for use in tubeless ready or full UST wheels/tyres, the No Puncture Hassle Sealant can be used for any kind of riding, from extreme downhill to road cycling and lasts for up to 6 months! It also works with a wide range of pressures from 15 120 psi and in temperatures ranging from -20 to +50 degrees. The sealant is also biodegradable, non-corrosive and easily washes off surfaces with water. Muc-Off might not be the first brand to release a tyre sealant, but the No Hassle Puncture Tyre Sealant is one of the best you can buy!
Ritchey Comp Carbon SeatpostBuilt to add efficiency, comfort and without adding unnecessary bulk to your bike, the Comp Carbon Seatpost boasts Ritchey’s full carbon fibre shaft and strong and lightweight 6061 aluminium clamp head. This construction means less of your pedalling effort is wasted through unwanted flexing and sudden impacts and vibrations are dampened, so you can stay in control and enjoy the ride.Carbon Comp Seatpost Ready for action, Ritchey has equipped this superb component with a Unidirectional (UD) carbon finish which adds another layer of stiffness and durability to this already solid component. Furthermore, its two-bolt clamping system is extra secure and easy to install, so you can put your trust in this dependable model on every journey.Features: Material: Shaft: Carbon Fibre; Clamp Head: 6061 Aluminium Finish: Unidirectional (UD) Carbon Offset: 25mmDiameter: Separate 27.2mm and 31.6mm optionsLength: Separate 350mm and 40mm optionsMininmum Post Insert in Bike Frame: 100mm Cradle: 43x38mm Bolt: 2-boltSaddle Clamp Torque: 13Nm (maximum)Seat Collar Torque: 6Nm (maximum) / 7Nm (maximum) for Ritchey steel framesManufacturer's Part Number: 41036008001 Weight: 229g (27.2mm version approx)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey Comp Carbon SeatpostBuilt to add efficiency, comfort and without adding unnecessary bulk to your bike, the Comp Carbon Seatpost boasts Ritchey’s full carbon fibre shaft and strong and lightweight 6061 aluminium clamp head. This construction means less of your pedalling effort is wasted through unwanted flexing and sudden impacts and vibrations are dampened, so you can stay in control and enjoy the ride.Carbon Comp Seatpost Ready for action, Ritchey has equipped this superb component with a Unidirectional (UD) carbon finish which adds another layer of stiffness and durability to this already solid component. Furthermore, its two-bolt clamping system is extra secure and easy to install, so you can put your trust in this dependable model on every journey.Features: Material: Shaft: Carbon Fibre; Clamp Head: 6061 Aluminium Finish: Unidirectional (UD) Carbon Offset: 25mmDiameter: Separate 27.2mm and 31.6mm optionsLength: Separate 350mm and 40mm optionsMininmum Post Insert in Bike Frame: 100mm Cradle: 43x38mm Bolt: 2-boltSaddle Clamp Torque: 13Nm (maximum)Seat Collar Torque: 6Nm (maximum) / 7Nm (maximum) for Ritchey steel framesManufacturer's Part Number: 41036008001 Weight: 229g (27.2mm version approx)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Water repellent 4-way stretch MTB pants for year round use, the Zenith pant has all bases covered to ensure even the grimmest of rides is a fun rideThe Zenith pants feature 3-layer waterproof panels and critical seam taping in the areas that are prone to soaking throughMain panel fabric has a DWR coating that adds a water resistant finish to the pantsArticulated legs ensure an excellent fit when on the bikeBuilt in elasticated waist adjustment allows you to fine tune your fitBoasting waterproof zippers on the hand and phone pockets, helps improve water resistance to keep your essentials away from the elementsConcealed vent zips give you that welcome channel of cool air on hotter ridesTailored leg construction to reduce bulk around your anklesLimited lifetime warranty.
Our experience with professional teams has led to the creation of the Midseason, a new medium-weight jersey suitable for spring and fall, thanks to the light brushing in strategic locations. Also perfect for cool summer mornings. Who Is It For? For those who know how important a midweight jersey is on spring and fall rides. Product Features New construction with thermal fabric Stretch fabric on side panels under sleeves and on shoulders for full freedom of movement Sleeve with raw-cut edge and reflective detailing 3 open pockets with gusset for increased capacity
ULTIMATE USE Alien Carbon SeatpostThe Alien Carbon Seatpost has been specifically designed by ULTIMATE USE to provide outstanding performance for your road rides. Constructed from high-quality carbon fibre and benefiting from computer-aided design, it offers you the perfect balance of strength, rigidity and flexibility. This construction ensures you'll enjoy efficient power transfer and avoid the worst vibrations when riding over poor road surfaces.Features: Material: Carbon Fibre shaft, Aluminium clamp head Finish: 3K Matt Setback: 10mm Saddle Rail Compatibility: Clamp designed for standard 7x7mm saddle rails Recommended Seatpost Clamping Force: 3.5Nm Single-bolt saddle rail clamp design for faster and easier adjustments Alternative saddle rail clamps available to purchase separately Weight: 140g (27.2mm diameter, 300mm length)Buy ULTIMATE USE Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Never skimping on the strength, this lever is made from forged and machined 6061-T6 Aluminum for lightweight durability. To give your thumb a secure surface that it won't slip off of, this lever is covered with a textured non-slip pad.This lever is a sure thing with Race Face dropper posts, but it also actuates most cable operated posts needing 11mm or less of cable pull. Fitting nicely under your bar Turbine R 1x seatpost lever may just become your thumb's new best friend. Made strong, this lever works flawlessly and requires less force to actuate it. Optimized for Race Face but will work with other dropper posts. Specification:Lever ActuationMechanical,Compatible WithMatchmaker,Includes:Cable and Housing,Weight:66g.
Replacement vacuum pump for both 4.5" and 6" SeaSuckers.