Whether you're clocking up the miles with your local club or competing in an event, this road-ready seatpost is engineered for reliable performance. It features a hard-wearing aluminium construction, which makes it tough and dependable on every mile of road. ITM has also wrapped it in stiff carbon to deliver an extra layer of strength while also keeping its overall weight reduced to only 268g. Another highlight is its two-piece clamp head that uses a two-bolt design to provide maximum rigidity on your saddle rails. Coming complete with eye-catching ITM graphics that fit in well with the rest of the R Triango line of components, this is a perfect choice of upgrade for a secure and supportive hold as you transfer all of your leg power to your pedals.
ITM X-One SeatpostThe X-One seatpost is made from carbon fibre with a 7075 alloy head. This makes the post incredibly lightweight. It features ITM's "Sit'N'Go" micro adjustment that allows a wide range of adjustments of the saddle, such as fore/aft and nose up/nose down. This will allow you to find the perfect fit. Features: Material: Carbon body with 7075 alloy head Setback: 16 Weight: 261gBuy ITM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Providing you with plenty of height to play with as you seek out your ideal riding spot, this durably-designed ITM seatpost gives a suitably stiff performance, however hard you ride. Featuring a 16mm offset and ITM's "Sit'n'Go" micro adjust head, subtle positional changes can be made to your saddle's angle to ensure the most comfortable sitting experience possible.
The Elite Sealed Shift Kit uses a continuous liner that seals the system completely protecting it against dirt, mud and other contamination. Available in three colors, this system offers the ultimate combination of protection and low-friction performance.To ensure the best possible performance, we’ve paired Elite Polished Ultra-Slick inner cables with our improved Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability.The continuous liner running from the levers to the derailleur offers outstanding protection from dirt and debrisElite Polished Ultra-Slick cables are paired with Slick-Lube liners to minimize frictionLightweight XEX shift housing is nearly 30% lighter than traditional shift housing5.0mm shift housing and 1.9mm inner liner may not be compatible with all frames and componentsContents:1 3200mm XEX Shift Housing,2 2300mm STS-EL Elite Polished Ultra-Slick Shift Inner Cables,2 2225mm Slick-Lube Liners,2 LEX-SL 4mm Shift Housing Segments, 300mm,4 Open Brass End Caps,7 Open Alloy End Caps for 5mm Housing,2 Open Alloy End Caps for 4mm Housing,2 Pro Indexed Inline Adjusters (4mm/5mm),2 Housing Connectors (4mm/5mm),2 Cable Tips,2 Grub Seals,2 5G Tube Tops,2 Rotating Hooks.XEX - lightweight, braided steel strands around a Slick-Lube linerSealed, LubricatedJagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum.STS-ELSTS-EL - pre-stretched, highly polished, uncoated slick stainless steel spiral-bound cablesPolymer-Coated or Polished Ultra-Slick Stainless SteelThese ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance.
Jagwire Pro Dropper Seatpost Cable Upgrade KitThis high-quality kit is designed for use with your dropper seatpost for smoother cable movement on every run. It features Pro Polished cables combined with improved Slick-Lube housing liners which offer an enhanced remote lever feel and long-lasting performance. This makes it ideal for use with internal and external dropper seatposts with tight bends in the routing. Easy to install, this is a perfect choice of upgrade for fast and flawless cable movement when changing position on your off-road pursuits.This kit includes the following items:1x 2000mm inner cable (STR-PS Pro Polished)1x FLEX-SL housing: 1700mm, 4mm2x sealed end caps2x lined end caps (end caps with liner)1x cable tip1x 5G tube top frame protector1x rotating hook Features: Material: Steel Use: MTB Compatibility: Dropper seatpostsTechnologies: FLEX-SL: Flexible linear strands around a Slick-Lube liner. Flexible Linear Strand, Lubricated: Linear strands of flexible steel are used to encircle the Slick-Lube Liner creating a low-compression ring. This makes it ideal for use with internal dropper seatposts with tight bends in the routing. STR-PS: Polished stainless steel spiral-bound cables. Pro Polished Stainless for Dropper: Spiral-bound stainless cables undergo a polishing process to remove imperfections, and the 0.8mm diameter improves flexibility and further reduces friction. With no coating to wear off, these cables provide long-lasting performance. STR-PS cables are designed for use only with dropper seatposts and remote levers. Gold tint is applied for easy identification.Buy Jagwire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This kit includes a dropper-specific 0.8 mm Pro Polished Slick inner cable for seamless use with remote levers, as well as actuator arms to provide efficient cable movement. The Pro Polished Slick cables and Slick-Lube liners provide an enhanced remote lever feel and durable performance, no matter how hard you ride. This Pro Dropper kit is compatible with Shimano cable-actuated dropper seatposts and remotes. Easy to install, this set comes with everything you need to maintain a reliable dropper post experience.
Jagwire Road Elite Sealed Brake Cable Kit
Jagwire Road Elite Sealed Brake Cable Kit
Jagwire Road Elite Sealed Brake Cable Kit
To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Slick-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect. Technologies: CSX: High carbon, low compression coiled steel around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-EL: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance. What's Included: (1) 2200mm CSX Brake Housing (1) 1350mm STS-EL Elite Polished Ultra-Slick Front Brake Inner Cable (1) 2000mm STS-EL Elite Polished Ultra-Slick Rear Brake Inner Cable (1) 1275mm Slick-Lube Liner (1) 1925mm Slick-Lube Liner (2) Open Brass End Caps (4) Open Alloy End Caps (2) Cable Tips (2) Grub Seals (2) 5G Tube Tops (2) Rotating Hooks
Jagwire Road Elite Sealed Gear Cable KitThis top-quality sealed gear kit uses a continuous liner that seals the system completely protecting it against dirt, mud and debris. To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Speed-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect.Features: Housing Construction: XEX Outside Diameter: 5.0mm Housing Length: 1700mm Liner: Speed-Lube Liner Length: 2225mm Cable Construction: STS-LF Polymer-coated Slick Stainless Compatibility: SRAM or Shimano road brakes Front Cable Length: 2300mm Rear Cable Length: 2300mm Includes: 1x 1700mm XEX shift housing 2x 2225mm Speed-Lube liners 2x 2300mm STS-LF Polymer-coated shift inner cables 2x LEX-SD 4mm shift housing segments, 300mm 3x open Brass end caps 4x open Alloy end caps for 5mm housing 2x open Alloy end caps for 4mm housing 2x pro indexed inline adjusters (4mm/5mm) 2x housing connectors (4mm/5mm) 2x non-crimp cable tips 2x grub seals 2x 5G Tube Tops 2x Rotating Hooks Technologies: XEX: Lightweight, braided steel strands around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-LF: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance.Buy Jagwire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Jagwire Road Elite Sealed Gear Cable KitThis top-quality sealed gear kit uses a continuous liner that seals the system completely protecting it against dirt, mud and debris. To ensure the lowest possible friction, Jagwire developed a unique polymer-coated cable and paired it with Speed-Lube ultra-slick lubricant used throughout the liner. This combination delivers amazing performance and the precise lever feel you expect.Features: Housing Construction: XEX Outside Diameter: 5.0mm Housing Length: 1700mm Liner: Speed-Lube Liner Length: 2225mm Cable Construction: STS-LF Polymer-coated Slick Stainless Compatibility: SRAM or Shimano road brakes Front Cable Length: 2300mm Rear Cable Length: 2300mm Includes: 1x 1700mm XEX shift housing 2x 2225mm Speed-Lube liners 2x 2300mm STS-LF Polymer-coated shift inner cables 2x LEX-SD 4mm shift housing segments, 300mm 3x open Brass end caps 4x open Alloy end caps for 5mm housing 2x open Alloy end caps for 4mm housing 2x pro indexed inline adjusters (4mm/5mm) 2x housing connectors (4mm/5mm) 2x non-crimp cable tips 2x grub seals 2x 5G Tube Tops 2x Rotating Hooks Technologies: XEX: Lightweight, braided steel strands around a Slick-Lube liner Sealed, Lubricated: Jagwire sealed systems, available only in DIY kits, include liners that run continuously from the lever to the brake or derailleur. This protects the cable and housing from dirt, mud or anything else that can cause friction. But because the liner runs the full length of the cable, Ultra-Slick polished inner cables are used to keep friction to a minimum. STS-LF: Pre-stretched, slick stainless steel spiral-bound cables with an ultra-slick polymer coating designed for use in Jagwire Sealed Kits Polymer-Coated or Polished Ultra-Slick Stainless Steel: These ultra-slick stainless cables deliver the ultimate low-friction performance. Jagwire offers two options: An ultra-slick polymer-coated cable for use in our Elite Sealed Systems with continuous housing/liners, or a highly polished, uncoated cable that can be used with any housing and lubricant. These Elite level cables deliver incredibly accurate, smooth performance.Buy Jagwire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.