Primarily intended for indoor trainers this replacement rear wheel trainer skewer can also be used for outdoor rides, Specifically designed to be used with Saris Turbo trainers.
This Saris XD/XDR freehub lets you use a SRAM 11 and 12 speed XD and XDR cassette with Hammer, H2 and H3 smart trainer, it is a genuine Saris replacement part.
With this Saris ANT+ Bluetooth Speed/Cadence sensor recording your training data has never been easier, Saris have developed a Speed and Cadence sensor that is contained within the same unit. No more fiddling around with magnets, just install the battery, choose speed or cadence, mount the unit to either crank arm or wheel hubs and you are ready to go.
This accessory kit can be used across a wide range of trainer setups, included in the kit is a training mat, perfect for keeping grime, sweat and dirt off your floor, a climbing block for the front wheel and a saris towel to use whenever you have finished your workout.
This bike rack features Saris' unique arch-leg design that ensures your bikes stay away from your vehicle chassis. This means both your vehicle and bike paintwork is protected and every journey is quiet and rattle-free. Plus, it holds two bikes with a weight of 15kg per bike. Compatible with Popular Modern Vehicles The Bones trunk rack made a name for itself in the mid-90’s, and 25 years later it’s doing it again. How? By expanding its vehicle compatibility to fit 20% more of the most popular vehicles, including those with spoilers. Secure, Stable and Durable Two Bike Rack Featuring a unique arched leg, the Bones EX gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs. This simple, yet game-changing design by Fabio Pedrini transformed the iconic trunk rack into one that could fit 90% of the top 50 vehicles sold in the USA. Equipped with premium bike hold downs and a streamlined strap management system, the Bones EX is penning its own chapter in history books. And, just like its legendary predecessor, the Bones EX is made in Madison, Wisconsin, USA, with locally sourced materials that’ll last a lifetime. Specification: Carries 2 bikes (15.8 kg per bike) Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits A Bike Beam may be required for frames without a horizontal top tube Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs Premium bike hold downs that are easy to use and quick to load The integrated strap management system provides clean look and eliminates flapping straps Best-in-class ratchet straps speedily fasten bike to the rack Strongest frame on the market Built with 100% recyclable materials Rust-free injection moulded plastic Rubber feet articulate to protect paint Arc–based design separates bikes on different levels
This trainer platform is designed to be used with any bike trainer and comes fully assembled and ready to use straight out of the box. Plus, it features Saris' Nfinity Technology that enables it to move with you as you corner, climb hills and race down virtual descents while maintaining stability for the ultimate immersive cycling experience. And, this trainer platform is compatible with all major brands and models of bike turbo trainers and makes every indoor training session feel more meaningful and enjoyable regardless of your setup. Features: Material: Steel, Aluminium and Birch Dimensions: 152mm tall x 1600mm long x 902mm wide Technology: Saris Nfinity Max Fore-Aft Travel: 9.5” Max Side-to-Side Angle: 6° Compatible with all major brands and models of bike trainers Fully assembled in box Grip tape strategically placed to assist in walking on the trainer platform Tested to the combined weight (rider, bike and trainer) of 350 lb Built-in front wheel block for road and MTB Weight: 28kg Nfinity Technology Bringing stationary cycling to life, the MP1 moves in multiple axes with the utmost stability. This design results in an innovative technology, which combines curves, axes, gravity-physics and mechanical excellence. The MP1 design is the only way to experience this revolutionary technology and the joys of outdoor cycling within you home. Increased Training Comfort and Immersion Riding indoors as you train limits your movements due to the traditional trainer’s design. However, revolutionary market-leading pressure mapping and motion capture technology prove that the MP1 system significantly reduces saddle and foot pressure compared to when riding on a static trainer. Recruit More Muscles With this system, you have to account for balance while you train. It enables you to engage the upper body and smaller key muscles to stay balanced as you put the power down. The MP1 system is the only way to recruit large and small muscle groups while riding indoors. High-Quality Construction The MP1 features a sublime construction and looks as great as it performs. The main platform decking is built using elegant birch wood and only the highest-quality steel is used for its framework to ensure the MP1 will withstand even the hardest performance-outputs. Fun and Hassle-Free Performance Although this platform significantly increases your workout, Saris also have successfully enhanced the fun and enjoyment of training sessions. This movement platform with its Nfinity Technology brings indoor training to life and make it feel infinitely more worthwhile.
This top-level smart trainer replicates any workout with the utmost efficiency, up to 1500 watts with a top climbing grade of 15%. Keeping track of your workout couldn't be easier, you simply plug in your workout mobile app of choice via its integrated dual-band ANT+ FE-C and Bluetooth sensors, and its electromagnetic response system handles the rest. Also, it features integrated speed, cadence and precisely-measured power data, so you can view, track and record your performance-output without the need for additional sensors. And, for the greatest tyre-to-roller engagement possible, this trainer features Saris' distinctive clutch-knob mechanism to optimise every ride. Please Note: This turbo trainer comes with UK, EU and US power cable adaptors and the specific one-piece power cable that any of the adapters can be fitted to. Features: Quiet noise-level output at 69 decibels at 20 mph Provides accurate power readings up to +/- 5% Designed to fit common road and mountain bike frames Included Steel Quick Release skewer has three settings for rear dropout spacing: 120mm, 130mm and 135mm Thru-axle adapter available for 142x12mm and 148x12mm (sold separately) Integrated dual ANT+ FE-C and Bluetooth standards ANT+ and BlueGiga USB bike dongles sold separately Fast response electromagnetic resistance ensures most responsive resistance and maximum power available Handles 1500 watts at 20 mph and can simulate up to a 15% climbing grade Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2 trainer Internally integrated speed, cadence and power data eliminates the need for extra external sensors LED indicator lights communicate connectivity and more Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts Foldable Classic frame with spring loaded, bolt-action lever Features a clutch knob for perfect roller to tyre tension Compatible with 650b, 700c, 26", 27", and 29" tyres - up to a 2.0" diameter Does not fit 650c wheel sizes, or wider 29er tyres Precision-machined Alloy roller reduces tyre wear and slippage Eccentric levelling feet allow for easy adjustment on uneven surfaces Trainer tyre recommended Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date Trainer is tested to the combined weight (rider and bike) of 136kg Not compatible with Saris 20/24" wheel adapter Thru-axle adapter available for 142x12mm and 148x12mm bikes (sold separately) Formerly branded as CycleOps M2 Smart Trainer
This product has a capacity for holding two bikes, with anti sway straps to ensure your bikes are fixed in place and won't hit each other. Constructed from heavy–duty, 100% recyclable plastic, the Saris Bones 2 Bike Rack is the strongest and most environmentally–friendly rack on the market. Injection–moulded arms and legs will never rust and can support up to two bikes with ease, separating them on different levels for the ultimate assurance that they won’t rub or touch during transport. Please note to use this carrier on bikes with non standard top tubes such as full suspension and women's bikes you will need to buy the Saris Bike Beam Bar (sold separately). Comes with manufacturers lifetime guarantee
No fancy gizmos, no wires, no fuss, introducing the Saris Basic Mag Trainer. If you're looking for an easy way to ride your bicycle indoors, call off the search - you've found it.Whether you're training for a local charity ride or working to beat your friend's FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking. Magnetic resistance unit provides a quiet and frictionless rideLinear resistance boosts workout intensity to match each pedal stroke and gear clickEccentric leveling feet allow for easy adjustment on uneven surfacesComes on a sturdy, foldable frameAdjust tyre fit to resistant unit with a convenient turn knobResistance unit roller allows for 700c, 26", 27" and 29" wheel sizes - up to a 2.0 tyreThis trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and is compatible with rear dropout spacing: 120mm, 130mm and 135mmTrainer tyre recommendedCompatible with virtual training appsAll of our trainers are tested to the combined weight (rider and bike) of 300lbsTrainer skewer includedOptional thru-axle adapter available for 142 x 12mm and 148 x 12mm bikesNoise level at 20 mph is 72-76 decibels
The Saris bike beam attaches between the seatpost and stem to create a 'virtual' horizontal top tube that allows full suspension, women's and children's bikes to be hung from the Saris cycle carriers correctly for greater stability and security.
Saris Hatch Huggers replaces Saris regular straps for vehicles requiring a more custom fit. Use for vehicles with glass boot lids.
If you have a cycle carrier that holds the bike from the top tube, you'll know the struggle of the handlebars turning and wheels spinning as you drive along. Thanks to Saris' Wheel Straps, you need no longer worry.Keeps handlebars from turning when bikes are being transportedKeeps wheels from spinningFor use with hanging style cycle carriers2 straps includedWith a simple and easy to use design, the Saris Wheel Straps use a quick release buckle so you can fit or remove them in an instant. By stopping the bars and wheels from turning your car and bike is better protected, keeping your car and bike looking pristine. With 2 straps included the Wheel Straps are perfect for riders with a hanging style bike rack.