DVO Suspension Sapphire D1 Boost MTB Fork 27.5" A big and bold fork for the boisterous MTB rider, this Sapphire D1 model by DVO combines a hard-wearing aluminium construction with excellent adjustability, allowing you to take on every trail with confidence, composure and control. Equipped with a Boost-sized axle for enhanced stiffness and handling on the most demanding routes, no journey up, down or across the mountain is too intimidating. Boost-Sized, Trail-Taming MTB ForkThis sturdily-built fork comes complete with six clicks of low-speed compression adjustment and over 30 high-speed adjustments to let you set your suspension to your preference for the route ahead. Supported by Off The Top (OTT) and Advanced Volume Adjust (AVA) settings, as well as 14 clicks of shim stack-controlled damping, every surface is made super smooth to keep you rolling reliably from start to finish. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 150mm Axle: 15x110 mm Boost thru axle (bolted) Offset: 42mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Sapphire D1 Boost MTB Fork 27.5" A big and bold fork for the boisterous MTB rider, this Sapphire D1 model by DVO combines a hard-wearing aluminium construction with excellent adjustability, allowing you to take on every trail with confidence, composure and control. Equipped with a Boost-sized axle for enhanced stiffness and handling on the most demanding routes, no journey up, down or across the mountain is too intimidating. Boost-Sized, Trail-Taming MTB ForkThis sturdily-built fork comes complete with six clicks of low-speed compression adjustment and over 30 high-speed adjustments to let you set your suspension to your preference for the route ahead. Supported by Off The Top (OTT) and Advanced Volume Adjust (AVA) settings, as well as 14 clicks of shim stack-controlled damping, every surface is made super smooth to keep you rolling reliably from start to finish. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression Shim Stack, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 150mm Axle: 15x110 mm Boost thru axle (bolted) Offset: 42mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
The new Sapphire is bigger and better - simple as that. A new chassis design utilizes 34mm stanchions and a stronger casting design to keep up with today's demanding riding standards. A slightly modified air spring provides an extremely supple begging stroke, improved mid-stroke support and a progressive end for control on the big hits. Combine that with the proven damping features & characteristics of the Diamond, this fork is the new standard.Quick Range Low Speed CompressionWith a quick turn of the knob, the low speed circuit is restricted providing a nice platform for climbingHigh Speed Compression30 clicks of dynamic high speed compression adjust at your fingertips. Designed to be a usable range from start to finish so go right ahead and max it out!OTT "Off The Top"This exclusive & proven DVO design brings comfort to a new level. By externally adjusting the pre-load on the negative spring, you have 100% control over the initial part of the stoke. Set your air pressure to control your mid-stroke support and bottom out. Set your OTT to maximize comfort and traction.Closed Cartridge Bladder SystemJust like the Jade coil shock, the bladder is compressed rather than expanded, offering incredible small bump sensitivity and durability.Specifications:Intended Use - Trail/XC,Model Name - Sapphire D1,Damper - D1 Damper,High speed compression,6 position low speed compression,Rebound,Air Spring Features - Air Pressure Adjust, External OTT Off The Top.,Travel - 27.5" = 130 - 150mm/29" = 120 - 140mm,Stanchions - 34mm,Crown - 27.5" = 42mm offset/29" = 44mm offset,Axle to Crown - 27.5" = 545 at 150mm travel/29" = 552 at 140mm travel,Wheel Size - 27.5, 29/27.5 PLUS Up to 3.0 Tire,Hub Spacing - Boost 110mm,Axle Type - 15mm Bolted Axle,Weight - 1900g,Steerer Options - Tapered Alloy,Rotor Mount - 160mm Direct,Lowers - Magnesium Disc Only.
Built to flatten every terrain on your way up, down and over the mountain, the confidence-inspiring DVO Sapphire D1 lets you ride fearlessly and comfortably. Providing six clicks of low-speed compression adjustment and over 30 high-speed adjustments, as well as Off The Top (OTT) and Advanced Volume Adjust (AVA) adjustability, every eventuality is catered for as you conquer every trail. Equipped with a further 14 clicks of shim stack-controlled damping and a closed cartridge bladder system, using different configurations to make the most of every ride is just a tweak or two away. A top-end fork for any ride, the DVO Sapphire D1 29 shines brightest when pushed to the limits.
Ready to smooth out every terrain in your way, this confidence-instilling, Boost-sized fork has an aluminium main build and magnesium-cast lowers for a stiff, responsive and sturdy performance no matter what. Giving six clicks of low-speed compression adjustment and over 30 high-speed adjustments, no bump or landing is too intimidating, while the Off The Top (OTT) and Advanced Volume Adjust (AVA) features work together for better small bump sensitivity and control of your full stroke. With 14 clicks of shim stack-controlled damping and a closed cartridge bladder system, customising the rowdiness of your run using different configurations is encouraged, making this stiff and supportive fork an impressive choice for the aggressive and exhilarating rider.
dhb Aeron Lab Raceline Bib Short 2.0The second generation dhb Aeron Lab Raceline Bib Shorts use new fabrics and a new chamois for improved performance. If speed is the aim, then these bib shorts are the answer.Aeron LAB. Engineered in the best laboratory we know: out on the road.The dhb Aeron LAB collection combines rigorous real-world testing with the best components available, resulting in a collection tuned to the needs of demanding riders reaching for new levels of performance. Because when you’re pushing yourself, you need kit that exceeds your expectations.Aeron LAB Raceline: tuned for speed.Raceline has been designed around one thing: speed. Using fabrics specifically selected to disrupt airflow and help you cut through the air more efficiently, Aeron LAB Raceline feels fast, looks fast and is fast. This second generation bib short benefits from feedback from UCI Continental Team, Canyon dhb, who race in dhb Aeron Lab Raceline.Custom-made, Elastic Interface® Paris HCS Paddhb have turned to the Italian experts Elastic Interface®, renowned for producing the most technically advanced and comfortable cycling chamois pads in the world, for their new custom pad. Combined with testing by pro riders, the new Paris HCS is sure to meet the needs of elite racers.The Paris HCS Pad is constructed with 3 different densities of high-density foam, which combine to give riders comfort on rides of over 7 hours. It’s been shaped with comfort over long distances in mind, with a smooth surface and gradual transitions of different densities. It uses Elastic Interfaces innovative Hybrid Cell System for extra support when in an aggressive, road riding position. Finally, the finishing surface has perforations to help with moisture management, and it uses sustainable, recycled yarns.Race ready, second-skin fitMade for top level road cyclists with a cyclist’s physique, Aeron LAB has a close, uncompromising second-skin fit. It’s built for riding fast.Designed to sit extremely close to the body with no excess fabric to slow you down, Aeron LAB has a closer fit than the dhb Aeron collection. It will feel different: compressive and close. Once on the bike, Aeron LAB comes into its own.Premium Aerodynamic FabricsWith speed as the mission, dhb have made no compromises in constructing these bibs, working with world-leading fabric mills to build a special pair of shorts.The main body of the shorts is made from a lightweight and compressive fabric, offering both performance gains and comfort. It also wicks sweat efficiently and is quick drying so you stay comfortable, no matter how hard the effort. The side panel is made from a lightweight mesh fabric, specifically chosen for its exceptional breathability and airflow disruption characteristics.An integrated gripper stitched into this fabric eliminates the need for an extra seamline, and wide, soft bib straps keep the bibs in position without feeling restrictive. There’s no risk of chaffing with these lightweight straps.The combination of these features adds up to a pair of bib shorts tuned to one thing only: riding fast. When looked after, they will keep on performance ride after ride. Please follow the dressing instructions supplied with the shorts to make sure you get the best out of these bibs.Features:Bib Straps: 74% Polyester, 26% ElastaneInner Leg: 80% Polyamide, 20% ElastaneOuter Leg: 58% Polyamide, 42% ElastaneRace ready, second-skin fitSecond generation short, enhanced with the help of the prosElastic Interface® Paris HCS PadAerodynamic fabrics for air disruptionIntegrated leg gripper for maximum comfort and supportWide soft bib strapsWash at 30, do not tumble dryPlease follow the dressing instructions supplied with the shorts to make sure you get the best out of these bibs.Buy dhb Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring a universal presta/schrader head and large analog gauge. Details Large stable steel base and tube Universal presta/schrader head Ergonomic handle with hidden needle & inflator Large analog gauge in base Extended hose length Specs pressure 160 psi / 11 bar warranty 5 Years