Mavic Deemax Pro Sam Hill Boost WheelsetThe rims on these wheels feature a maxtal construction, a specially-developed alloy used to makes them extra tough while staying lightweight for smooth climbing. Plus, both rims feature a 28mm inner width, allowing you to run wider tyres for greater ground contact and superior uphill traction.Tubeless Ready and Disc Brake CompatibleThese wheels use a tubeless-ready design, giving those who switch extra puncture protection and reduced inertia. The Mavic hubs uses QRM and QRM+ bearings for extra durability for a hassle-free ride in all weather conditions. Plus, the added disc brake compatibility ensures you have excellent braking power needed to make those tough turns and come out on top of your very own EWS World Championship.Maxtal Construction with QRM TechnologyExclusive to Mavic, this specific aluminium alloy offers a higher strength to weight ratio than conventional 6106 alloy. Instead of being drilled, the lower rim bridge is pushed up on the inside, then threaded to enable the spoke nipples to be directly screwed in, leaving the upper rim bridge intact. Mavic's most demanding level. Cartridge bearings are of course double sealed with C3 internal clearance and topped with a micro-adjustability system.Force Transfer System Light ReinforcementForce Transfer System Light Reinforcement (FTS-L) of key transmission components. The contact area between the pawl and the hub body in reinforced by two stainless steel inserts, which allows the use of a 100% aluminium hub body.UST Tubeless ReadyThe UST concept improves traction, control and comfort while reducing inertia and flats.Features: Use: Enduro/Trail Rim: Alloy (Maxtal) Clincher (Tubeless Ready) Rim Width: 28mm (inner) Spokes: Zicral, straight pull, flat Spoke Count: 24 (front/rear) Spoke Lacing: Cross (front), Isopulse (rear) Nipples: Alloy, Fore-integrated Hub: Mavic, alloy shell (front/rear) Cassette Compatibility: SRAM XD 11/12-Speed Hub Widths: Front: 12x110mm Boost; Rear: 12x148mm Boost Brake Standard: 6-Bolt Disc Brake Recommended Tyre Sizes: 46mm-64mm (1.8"-2.5") Bearings: QRM+ bearings (front), QRM auto bearings (rear) UST tubeless valves included Weight: 1094gBuy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Whether you’re an enduro racer or an all-mountain ripper you need a wheel that delivers the perfect balance of strength stiffness and lightweight agility—so you can push it on rowdy descents and still hammer up climbs with efficiency. The Deemax Pro weighing just 1810g gives you the confidence to nail new lines and carry more speed on technical downhill terrain. It was developed with input from top pro racers including 2017/2018/2019 Enduro World Series champion Sam Hill. The rims are lightweight yet also strong enough to withstand the abuses of hard-charging trail riding. Our innovative ISM 4D manufacturing process removes any unnecessary material from the rim. This process minimizes weight and reduces inertia while leaving enough material on the sidewalls and spoke bed where most of the stresses apply. The internal rim width which affects tire shape and size is 28mm based on the choice of our pro riders. The result is a wheel that’s strong and light for acceleration and control on the most aggressive trails. The wheel is laced with 24 Zicral spokes for maximum power and brake torque transfer. The rear hub features our fast-engaging ID 360 freehub and is compatible with any drivetrain setup. The front hub is 15x100/20x110 or 15x110 (Boost) compatible and the rear wheel comes in 12x142 or 12x148 (Boost). Key benefits Ultra-responsive ride quality. 28mm wide (internal) rims proven fastest through extensive testing with top pro enduro racers. ISM 4D construction Isopluse lacing and 24 Zicral spokes deliver maximum acceleration in a lightweight package. Confident handling and durability you can count on. ISM 4D rim technology minimizes weight without sacrificing strength. Maxtal alloy rims and Zicral spokes for added strength and durability. UST Tubeless Ready for added traction and control. User-friendly tubeless technology for better traction and control with reduced risk of punctures. Wheelset ships with UST valves. Rims Material: Maxtal Tire: UST Tubeless and tubetype Valve hole diameter: 65 mm SUP welding technology Fore tapeless tubeless technology UST tubeless technology Weight reduction: ISM 4D Hookless profile ETRTO size 275: 584x28TSS Internal width: 28 mm ETRTO size 29: 622x28TSS Spokes Material: Zicral Count: 24 front and rear Nipples: Fore integrated aluminum Lacing: front crossed 2 rear Isopulse Shape: straight pull flat Delivered with User guide UST valve and accessories Specific disc bolts Multifonction adjustment wrench (delivered with rear wheel) Hubs Front and rear bodies: aluminum QRM+ bearing preload technology QRM Auto bearing preload technology Front bearings : adjustable sealed cartridge bearings (QRM+) Rear bearings : auto adjust sealed cartridge bearings (QRM Auto) Intended use ASTM CATEGORY 4 : ENDURO AND TRAIL RIDING Recommended tire sizes: 46mm to 64mm (18 to 25) For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 26bar/38PSI with a 47mm tyre - 225bar/33PSI with a 64mm tyre Versions Color: Black only Disc standard : 6 Bolts only Hub width : Boost only (front 110 rear 148) Compatibility Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Compatible Adapters and freewheel bodies ID360 Shimano steel freewheel body (V3790101) ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : 12x148 rear axle adapters (V2510701 - Delivered with the wheel) ID360 Shimano Micro Spline alloy freewheel body (V3990101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Whether you’re an enduro racer or an all-mountain ripper you need a wheel that delivers the perfect balance of strength stiffness and lightweight agility—so you can push it on rowdy descents and still hammer up climbs with efficiency. The Deemax Pro weighing just 1810g gives you the confidence to nail new lines and carry more speed on technical downhill terrain. It was developed with input from top pro racers including 2017/2018/2019 Enduro World Series champion Sam Hill. The rims are lightweight yet also strong enough to withstand the abuses of hard-charging trail riding. Our innovative ISM 4D manufacturing process removes any unnecessary material from the rim. This process minimizes weight and reduces inertia while leaving enough material on the sidewalls and spoke bed where most of the stresses apply. The internal rim width which affects tire shape and size is 28mm based on the choice of our pro riders. The result is a wheel that’s strong and light for acceleration and control on the most aggressive trails. The wheel is laced with 24 Zicral spokes for maximum power and brake torque transfer. The rear hub features our fast-engaging ID 360 freehub and is compatible with any drivetrain setup. The front hub is 15x100/20x110 or 15x110 (Boost) compatible and the rear wheel comes in 12x142 or 12x148 (Boost). Key benefits Ultra-responsive ride quality. 28mm wide (internal) rims proven fastest through extensive testing with top pro enduro racers. ISM 4D construction Isopluse lacing and 24 Zicral spokes deliver maximum acceleration in a lightweight package. Confident handling and durability you can count on. ISM 4D rim technology minimizes weight without sacrificing strength. Maxtal alloy rims and Zicral spokes for added strength and durability. UST Tubeless Ready for added traction and control. User-friendly tubeless technology for better traction and control with reduced risk of punctures. Wheelset ships with UST valves. Rims Material: Maxtal Tire: UST Tubeless and tubetype Valve hole diameter: 65 mm SUP welding technology Fore tapeless tubeless technology UST tubeless technology Weight reduction: ISM 4D Hookless profile ETRTO size 275: 584x28TSS Internal width: 28 mm ETRTO size 29: 622x28TSS Spokes Material: Zicral Count: 24 front and rear Nipples: Fore integrated aluminum Lacing: front crossed 2 rear Isopulse Shape: straight pull flat Delivered with User guide UST valve and accessories Specific disc bolts Multifonction adjustment wrench (delivered with rear wheel) Hubs Front and rear bodies: aluminum QRM+ bearing preload technology QRM Auto bearing preload technology Front bearings : adjustable sealed cartridge bearings (QRM+) Rear bearings : auto adjust sealed cartridge bearings (QRM Auto) Intended use ASTM CATEGORY 4 : ENDURO AND TRAIL RIDING Recommended tire sizes: 46mm to 64mm (18 to 25) For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 26bar/38PSI with a 47mm tyre - 225bar/33PSI with a 64mm tyre Versions Color: Black only Disc standard : 6 Bolts only Hub width : Boost only (front 110 rear 148) Compatibility Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Compatible Adapters and freewheel bodies ID360 Shimano steel freewheel body (V3790101) ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : 12x148 rear axle adapters (V2510701 - Delivered with the wheel) ID360 Shimano Micro Spline alloy freewheel body (V3990101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Whether you’re an enduro racer or an all-mountain ripper you need a wheel that delivers the perfect balance of strength stiffness and lightweight agility—so you can push it on rowdy descents and still hammer up climbs with efficiency. The Deemax Pro weighing just 1810g gives you the confidence to nail new lines and carry more speed on technical downhill terrain. It was developed with input from top pro racers including 2017/2018/2019 Enduro World Series champion Sam Hill. The rims are lightweight yet also strong enough to withstand the abuses of hard-charging trail riding. Our innovative ISM 4D manufacturing process removes any unnecessary material from the rim. This process minimizes weight and reduces inertia while leaving enough material on the sidewalls and spoke bed where most of the stresses apply. The internal rim width which affects tire shape and size is 28mm based on the choice of our pro riders. The result is a wheel that’s strong and light for acceleration and control on the most aggressive trails. The wheel is laced with 24 Zicral spokes for maximum power and brake torque transfer. The rear hub features our fast-engaging ID 360 freehub and is compatible with any drivetrain setup. The front hub is 15x100/20x110 or 15x110 (Boost) compatible and the rear wheel comes in 12x142 or 12x148 (Boost). Key benefits Ultra-responsive ride quality. 28mm wide (internal) rims proven fastest through extensive testing with top pro enduro racers. ISM 4D construction Isopluse lacing and 24 Zicral spokes deliver maximum acceleration in a lightweight package. Confident handling and durability you can count on. ISM 4D rim technology minimizes weight without sacrificing strength. Maxtal alloy rims and Zicral spokes for added strength and durability. UST Tubeless Ready for added traction and control. User-friendly tubeless technology for better traction and control with reduced risk of punctures. Wheelset ships with UST valves. Rims Material: Maxtal Tire: UST Tubeless and tubetype Valve hole diameter: 65 mm SUP welding technology Fore tapeless tubeless technology UST tubeless technology Weight reduction: ISM 4D Hookless profile ETRTO size 275: 584x28TSS Internal width: 28 mm ETRTO size 29: 622x28TSS Spokes Material: Zicral Count: 24 front and rear Nipples: Fore integrated aluminum Lacing: front crossed 2 rear Isopulse Shape: straight pull flat Delivered with User guide UST valve and accessories Specific disc bolts Multifonction adjustment wrench (delivered with rear wheel) Hubs Front and rear bodies: aluminum QRM+ bearing preload technology QRM Auto bearing preload technology Front bearings : adjustable sealed cartridge bearings (QRM+) Rear bearings : auto adjust sealed cartridge bearings (QRM Auto) Intended use ASTM CATEGORY 4 : ENDURO AND TRAIL RIDING Recommended tire sizes: 46mm to 64mm (18 to 25) For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 26bar/38PSI with a 47mm tyre - 225bar/33PSI with a 64mm tyre Versions Color: Black only Disc standard : 6 Bolts only Hub width : Boost only (front 110 rear 148) Compatibility Rear axle: 12mm thru axle convertible to Quick Release with optional adapters and axle replacement Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Compatible Adapters and freewheel bodies ID360 Shimano steel freewheel body (V3790101) ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : 12x148 rear axle adapters (V2510701 - Delivered with the wheel) ID360 Shimano Micro Spline alloy freewheel body (V3990101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Whether you’re an enduro racer or an all-mountain ripper, you need a wheel that delivers the perfect balance of strength, stiffness and lightweight agility—so you can push it on rowdy descents and still hammer up climbs with efficiency.The Deemax Pro, weighing 1930g, gives you the confidence to nail new lines and carry more speed on technical downhill terrain. It was developed with input from top pro racers, including 2017/2018 Enduro World Series champion Sam Hill.The rims are lightweight, yet also strong enough to withstand the abuses of hard-charging trail riding. Our innovative ISM 4D manufacturing process removes any unnecessary material from the rim. This process minimizes weight and reduces inertia while leaving enough material on the sidewalls and spoke bed where most of the stresses apply.The internal rim width, which affects tire shape and size, is 28mm based on the choice of our pro riders. The result is a wheel that’s strong and light for acceleration and control on the most aggressive trails.The wheel is laced with 24 Zicral spokes for maximum power and brake torque transfer. The rear hub features our fast-engaging ID 360 freehub and is compatible with any drivetrain setup. The front hub is 15x100/20x110 or 15x110 (Boost) compatible, and the rear wheel comes in 12x142 or 12x148 (Boost).Key Features:Ultra-responsive ride quality.,28mm wide (internal) rims proven fastest through extensive testing with top pro enduro racers.,ISM 4D construction, Isopulse lacing and 24 Zicral spokes deliver maximum acceleration in a lightweight package.,Confident handling and durability you can count on.,ISM 4D rim technology minimizes weight without sacrificing strength.,Maxtal alloy rims and Zicral spokes for added strength and durability.,UST Tubeless for added traction and control.,User-friendly tubeless technology for better traction and control with reduced risk of punctures.,Wheelset ships with UST valves..CompatibilityFreewheel: Shimano Micro SplineRear axle: 12mm thru axle, convertible to Quick Release with optional adaptersFreewheel: Shimano/Sram or XDHubsFront bearings : adjustable sealed cartridge bearings (QRM+), Rear bearings : auto adjust sealed cartridge bearings (QRM Auto)Freewheel: Instant Drive 360Front and rear bodies: aluminumCompatible Adapters and freewheel bodiesID360 Shimano Micro Spline alloy freewheel body (LV3990100)Boost : 12x148 rear axle adapters (LV2510700 - Delivered with the wheel)ID360 XD freewheel body (LV3740100)ID360 Shimano alloy freewheel body (LV3780100)ID360 Shimano steel freewheel body (LV3790100)Intended UseRecommended tyre sizes: 46mm to 64mm (1.8" to 2.5")For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedASTM CATEGORY 4 : ENDURO AND TRAIL RIDINGVersionsFreewheel: Shimano/Sram or XDHub width : Boost (front 110, rear 148) or Non-Boost (front 100, rear 135/142)Disc standard : 6 Bolts onlyColor: Black only
Whether you’re an enduro racer or an all-mountain ripper, you need a wheel that delivers the perfect balance of strength, stiffness and lightweight agility—so you can push it on rowdy descents and still hammer up climbs with efficiency.The Deemax Pro, weighing 1930g, gives you the confidence to nail new lines and carry more speed on technical downhill terrain. It was developed with input from top pro racers, including 2017/2018/2019 Enduro World Series champion Sam Hill.The rims are lightweight, yet also strong enough to withstand the abuses of hard-charging trail riding. Our innovative ISM 4D manufacturing process removes any unnecessary material from the rim. This process minimizes weight and reduces inertia while leaving enough material on the sidewalls and spoke bed where most of the stresses apply.The internal rim width, which affects tire shape and size, is 28mm based on the choice of our pro riders. The result is a wheel that’s strong and light for acceleration and control on the most aggressive trails.The wheel is laced with 24 Zicral spokes for maximum power and brake torque transfer. The rear hub features our fast-engaging ID 360 freehub and is compatible with any drivetrain setup. The front hub is 15x100/20x110 or 15x110 (Boost) compatible, and the rear wheel comes in 12x142 or 12x148 (Boost).Ultra-responsive ride quality.28mm wide (internal) rims proven fastest through extensive testing with top pro enduro racers.ISM 4D construction, Isopulse lacing and 24 Zicral spokes deliver maximum acceleration in a lightweight package.Confident handling and durability you can count on.ISM 4D rim technology minimizes weight without sacrificing strength.Maxtal alloy rims and Zicral spokes for added strength and durability.UST Tubeless for added traction and control.User-friendly tubeless technology for better traction and control with reduced risk of punctures.Wheelset ships with UST valves.
Whether you’re an enduro racer or an all-mountain ripper, you need a wheel that delivers the perfect balance of strength, stiffness and lightweight agility—so you can push it on rowdy descents and still hammer up climbs with efficiency. The Deemax Pro, weighing 1930g, gives you the confidence to nail new lines and carry more speed on technical downhill terrain. It was developed with input from top pro racers, including 2017/2018 Enduro World Series champion Sam Hill.The rims are lightweight, yet also strong enough to withstand the abuses of hard-charging trail riding. Our innovative ISM 4D manufacturing process removes any unnecessary material from the rim. This process minimizes weight and reduces inertia while leaving enough material on the sidewalls and spoke bed where most of the stresses apply. The internal rim width, which affects tire shape and size, is 28mm based on the choice of our pro riders. The result is a wheel that’s strong and light for acceleration and control on the most aggressive trails.The wheel is laced with 24 Zicral spokes for maximum power and brake torque transfer. The rear hub features our fast-engaging ID 360 freehub and is compatible with any drivetrain setup. The front hub is 15x100/20x110 or 15x110 (Boost) compatible, and the rear wheel comes in 12x142 or 12x148 (Boost). Key Features: Ultra-responsive ride quality.,28mm wide (internal) rims proven fastest through extensive testing with top pro enduro racers.,ISM 4D construction, Isopulse lacing and 24 Zicral spokes deliver maximum acceleration in a lightweight package.,Confident handling and durability you can count on.,ISM 4D rim technology minimizes weight without sacrificing strength.,Maxtal alloy rims and Zicral spokes for added strength and durability.,UST Tubeless for added traction and control.,User-friendly tubeless technology for better traction and control with reduced risk of punctures.,Wheelset ships with UST valves..CompatibilityRear axle: 12mm thru axle, convertible to Quick Release with optional adaptersFreewheel: XD HubsFront bearings : adjustable sealed cartridge bearings (QRM+), Rear bearings : auto adjust sealed cartridge bearings (QRM Auto)Freewheel: Instant Drive 360Front and rear bodies: aluminum Compatible Adapters and freewheel bodiesID360 Shimano Micro Spline alloy freewheel body (LV3990100)Boost : 12x148 rear axle adapters (LV2510700 - Delivered with the wheel)ID360 XD freewheel body (LV3740100)ID360 Shimano alloy freewheel body (LV3780100)ID360 Shimano steel freewheel body (LV3790100) Intended UseRecommended tyre sizes: 46mm to 64mm (1.8" to 2.5")For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedASTM CATEGORY 4 : ENDURO AND TRAIL RIDING VersionsFreewheel: Shimano/Sram or XDHub width : Boost (front 110, rear 148) or Non-Boost (front 100, rear 135/142)Disc standard : 6 Bolts onlyColor: Black only
The Nike SB Sunday Shorts are a soft, sweat-wicking staple that keeps you comfortable on and off your board. This product is made with at least 75% recycled polyester fibres. Double-knit fabric with Dri-FIT technology helps keep you dry and comfortable. Elastic waistband and hidden drawcord let you personalize your fit.
The Nike SB Charge Suede is a skate staple with a sleek, low look. Its flexible design pairs plush foam with soft suede for comfort right out of the box. ###shogun-image-section###
The Sam Hill Signature Series has been developed for one of the world s best with one thing in mind; winning! The five time downhill world champion needs no introduction. He is widely regarded as one of the best riders of all time and as such, he knows what works best! Soft A25 kraton rubber is grippy, comfortable and durableSignature Sam Hill diamond texture and half waffle designDual locking mechanism is super secure135mm long and 31.5mm in diameterBy using a low profile and a soft rubber compound, Nukeproof ensured that these grips offer optimised trail feedback without compromising on comfort. The locking mechanisms on either end provide a secure connection with the bar and the durable A25 Kraton rubber not only offers excellent grip, it ensures a long lifespan.
This bar offers you strength and comfort for your bike's cockpit and a very aesthetically pleasing finish. Unique Coating The acid dipped micro shot-peened finish not only provides an amazing aesthetic, it enhances the fatigue resistance and the friction between the bar, grips, and controls to prevent component slippage. These bars soak up the buzz of the trail to deliver outstanding comfort on even the most challenging sections whilst also maintaining the necessary strength to endure tough spills and impacts.
These hand guards are an excellent way of protecting yourself, especially if you ride where there are tight trees or loose branches sticking over the trail. The handguards are the brainchild of Arnaud Vincent who is a World Champion motorcycle racer and keen mountain biker. In 2014 he suffered a crash due to a tree branch hitting his brake lever which made him wonder why handguards have not been used on MTB’s like they are on motorbikes. Sam Hill has been using handguards at home and also at EWS races. These signature handguards have been designed with Sam Hill to form part of his signature range.