SKF Rubber Sealed Deep Groove Ball Bearing - 15x32x9mm.
Jagwire Pro Quick Fit Brake Hose Adaptor KitDesigned to work seamlessly with Jagwire's Mountain Pro Hydraulic hose, the Jagwire Pro Quick Fit Adaptor Kit is the perfect way to enhance braking performance and durability. Adaptor kits are available to suit most popular brake systems and contain all the components required to fit Jagwire Mountain Pro Hydraulic hoses to one brake.Features: Compatibility: Kits available to suit most popular brake systems Each kit contains hardware fit 1 hoseBuy Jagwire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Replacement Sram MTB Stainless Hydraulic Line Kit is suitable for Guide R, RS, RSC and DB5 brakes. It is made of stainless steel and is available in a black colour. The length of tube is 2000 mm.
Replacement Line for Guide Ultimate hydraulic disc brakes.
SRAM Guide RSC Disc BrakeThe SRAM Guide RSC Disc Brake delivers exceptional control and stability. Thanks to the modulated braking feel of the SRAM lever design, the Guide RSC boosts rider-confidence as it provides you with braking consistency and fine-tuned accuracy that is matched by only a few other high-end disc brakes.Exceptional Braking Power and ModulationThe new SwingLink technology provides even more power and modulation than ever before. The braking performance is super-powerful when needed and silky-smooth throughout the lever stroke, ensuring you have steep trail confidence, fast-flowing entry and exit of corners and powerful, predictable braking on demand when the trail gets rough. The Guide RSC is an exceptional brake, suited to any level of riding in any trail or weather condition. Material: Body, Lever, Hardware: Aluminium Caliper Design: 4-piston dual diameter Recommended Rotor type: SRAM Centerline Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: MatchMaker X compatible, Piggyback Reservoir, BendZone Technology Highlight(s): TPC Plus, DirectLink, SwingLink, PURE Bladder Pad Holder: Top-loading Intended Use: Trail, All Mountain, Freeride System: Open System Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: YesPlease note: Rotor NOT included Weight: 317gPlease Note: The lever and hose is fully bled and ready to cut, mount and then take for a ride. For your convenience and so you can easily get the correct hose sizing for your bike, the brake hose is not connected at the lever side.Technologies: Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It's a quick and easy way to customize the feel of your brakes without having to move the pads. It's also a way to balance both brake levers to feel exactly the same. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp, it is a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShox XLoc and is compatible with XX and X0 brakes. Standard Matchmaker is also available and works with any split-clamp design and RockShox PushLoc. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement so you can switch your levers on the handlebar and run them moto without hassle. PURE Bladder: SRAM's new brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. SwingLink: Squeeze a new SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That's great, but there's more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It's the perfect balance of power and precision. TPC Plus (Timing Port Closure): A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide RSC Disc BrakeThe SRAM Guide RSC Disc Brake delivers exceptional control and stability. Thanks to the modulated braking feel of the SRAM lever design, the Guide RSC boosts rider-confidence as it provides you with braking consistency and fine-tuned accuracy that is matched by only a few other high-end disc brakes.Exceptional Braking Power and ModulationThe new SwingLink technology provides even more power and modulation than ever before. The braking performance is super-powerful when needed and silky-smooth throughout the lever stroke, ensuring you have steep trail confidence, fast-flowing entry and exit of corners and powerful, predictable braking on demand when the trail gets rough. The Guide RSC is an exceptional brake, suited to any level of riding in any trail or weather condition. Material: Body, Lever, Hardware: Aluminium Caliper Design: 4-piston dual diameter Recommended Rotor type: SRAM Centerline Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: MatchMaker X compatible, Piggyback Reservoir, BendZone Technology Highlight(s): TPC Plus, DirectLink, SwingLink, PURE Bladder Pad Holder: Top-loading Intended Use: Trail, All Mountain, Freeride System: Open System Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: YesPlease note: Rotor NOT included Weight: 317gPlease Note: The lever and hose is fully bled and ready to cut, mount and then take for a ride. For your convenience and so you can easily get the correct hose sizing for your bike, the brake hose is not connected at the lever side.Technologies: Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It's a quick and easy way to customize the feel of your brakes without having to move the pads. It's also a way to balance both brake levers to feel exactly the same. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp, it is a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShox XLoc and is compatible with XX and X0 brakes. Standard Matchmaker is also available and works with any split-clamp design and RockShox PushLoc. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement so you can switch your levers on the handlebar and run them moto without hassle. PURE Bladder: SRAM's new brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. SwingLink: Squeeze a new SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That's great, but there's more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It's the perfect balance of power and precision. TPC Plus (Timing Port Closure): A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide RSC Disc BrakeThe SRAM Guide RSC Disc Brake delivers exceptional control and stability. Thanks to the modulated braking feel of the SRAM lever design, the Guide RSC boosts rider-confidence as it provides you with braking consistency and fine-tuned accuracy that is matched by only a few other high-end disc brakes.Exceptional Braking Power and ModulationThe new SwingLink technology provides even more power and modulation than ever before. The braking performance is super-powerful when needed and silky-smooth throughout the lever stroke, ensuring you have steep trail confidence, fast-flowing entry and exit of corners and powerful, predictable braking on demand when the trail gets rough. The Guide RSC is an exceptional brake, suited to any level of riding in any trail or weather condition. Material: Body, Lever, Hardware: Aluminium Caliper Design: 4-piston dual diameter Recommended Rotor type: SRAM Centerline Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: MatchMaker X compatible, Piggyback Reservoir, BendZone Technology Highlight(s): TPC Plus, DirectLink, SwingLink, PURE Bladder Pad Holder: Top-loading Intended Use: Trail, All Mountain, Freeride System: Open System Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: YesPlease note: Rotor NOT included Weight: 317gPlease Note: The lever and hose is fully bled and ready to cut, mount and then take for a ride. For your convenience and so you can easily get the correct hose sizing for your bike, the brake hose is not connected at the lever side.Technologies: Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It's a quick and easy way to customize the feel of your brakes without having to move the pads. It's also a way to balance both brake levers to feel exactly the same. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp, it is a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShox XLoc and is compatible with XX and X0 brakes. Standard Matchmaker is also available and works with any split-clamp design and RockShox PushLoc. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement so you can switch your levers on the handlebar and run them moto without hassle. PURE Bladder: SRAM's new brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. SwingLink: Squeeze a new SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That's great, but there's more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It's the perfect balance of power and precision. TPC Plus (Timing Port Closure): A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide RSC Disc BrakeThe SRAM Guide RSC Disc Brake delivers exceptional control and stability. Thanks to the modulated braking feel of the SRAM lever design, the Guide RSC boosts rider-confidence as it provides you with braking consistency and fine-tuned accuracy that is matched by only a few other high-end disc brakes.Exceptional Braking Power and ModulationThe new SwingLink technology provides even more power and modulation than ever before. The braking performance is super-powerful when needed and silky-smooth throughout the lever stroke, ensuring you have steep trail confidence, fast-flowing entry and exit of corners and powerful, predictable braking on demand when the trail gets rough. The Guide RSC is an exceptional brake, suited to any level of riding in any trail or weather condition. Material: Body, Lever, Hardware: Aluminium Caliper Design: 4-piston dual diameter Recommended Rotor type: SRAM Centerline Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: MatchMaker X compatible, Piggyback Reservoir, BendZone Technology Highlight(s): TPC Plus, DirectLink, SwingLink, PURE Bladder Pad Holder: Top-loading Intended Use: Trail, All Mountain, Freeride System: Open System Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: YesPlease note: Rotor NOT included Weight: 317gPlease Note: The lever and hose is fully bled and ready to cut, mount and then take for a ride. For your convenience and so you can easily get the correct hose sizing for your bike, the brake hose is not connected at the lever side.Technologies: Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It's a quick and easy way to customize the feel of your brakes without having to move the pads. It's also a way to balance both brake levers to feel exactly the same. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp, it is a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShox XLoc and is compatible with XX and X0 brakes. Standard Matchmaker is also available and works with any split-clamp design and RockShox PushLoc. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement so you can switch your levers on the handlebar and run them moto without hassle. PURE Bladder: SRAM's new brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. SwingLink: Squeeze a new SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That's great, but there's more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It's the perfect balance of power and precision. TPC Plus (Timing Port Closure): A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide RSC Disc BrakeThe SRAM Guide RSC Disc Brake delivers exceptional control and stability. Thanks to the modulated braking feel of the SRAM lever design, the Guide RSC boosts rider-confidence as it provides you with braking consistency and fine-tuned accuracy that is matched by only a few other high-end disc brakes.Exceptional Braking Power and ModulationThe new SwingLink technology provides even more power and modulation than ever before. The braking performance is super-powerful when needed and silky-smooth throughout the lever stroke, ensuring you have steep trail confidence, fast-flowing entry and exit of corners and powerful, predictable braking on demand when the trail gets rough. The Guide RSC is an exceptional brake, suited to any level of riding in any trail or weather condition. Material: Body, Lever, Hardware: Aluminium Caliper Design: 4-piston dual diameter Recommended Rotor type: SRAM Centerline Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: MatchMaker X compatible, Piggyback Reservoir, BendZone Technology Highlight(s): TPC Plus, DirectLink, SwingLink, PURE Bladder Pad Holder: Top-loading Intended Use: Trail, All Mountain, Freeride System: Open System Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: YesPlease note: Rotor NOT included Weight: 317gPlease Note: The lever and hose is fully bled and ready to cut, mount and then take for a ride. For your convenience and so you can easily get the correct hose sizing for your bike, the brake hose is not connected at the lever side.Technologies: Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It's a quick and easy way to customize the feel of your brakes without having to move the pads. It's also a way to balance both brake levers to feel exactly the same. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp, it is a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShox XLoc and is compatible with XX and X0 brakes. Standard Matchmaker is also available and works with any split-clamp design and RockShox PushLoc. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement so you can switch your levers on the handlebar and run them moto without hassle. PURE Bladder: SRAM's new brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. SwingLink: Squeeze a new SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That's great, but there's more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It's the perfect balance of power and precision. TPC Plus (Timing Port Closure): A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide RSC Disc BrakeThe SRAM Guide RSC Disc Brake delivers exceptional control and stability. Thanks to the modulated braking feel of the SRAM lever design, the Guide RSC boosts rider-confidence as it provides you with braking consistency and fine-tuned accuracy that is matched by only a few other high-end disc brakes.Exceptional Braking Power and ModulationThe new SwingLink technology provides even more power and modulation than ever before. The braking performance is super-powerful when needed and silky-smooth throughout the lever stroke, ensuring you have steep trail confidence, fast-flowing entry and exit of corners and powerful, predictable braking on demand when the trail gets rough. The Guide RSC is an exceptional brake, suited to any level of riding in any trail or weather condition. Material: Body, Lever, Hardware: Aluminium Caliper Design: 4-piston dual diameter Recommended Rotor type: SRAM Centerline Fluid: DOT 5.1 Mount: Ambidextrous Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust Special Features: MatchMaker X compatible, Piggyback Reservoir, BendZone Technology Highlight(s): TPC Plus, DirectLink, SwingLink, PURE Bladder Pad Holder: Top-loading Intended Use: Trail, All Mountain, Freeride System: Open System Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: YesPlease note: Rotor NOT included Weight: 317gPlease Note: The lever and hose is fully bled and ready to cut, mount and then take for a ride. For your convenience and so you can easily get the correct hose sizing for your bike, the brake hose is not connected at the lever side.Technologies: Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It's a quick and easy way to customize the feel of your brakes without having to move the pads. It's also a way to balance both brake levers to feel exactly the same. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp, it is a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker X integrates the RockShox XLoc and is compatible with XX and X0 brakes. Standard Matchmaker is also available and works with any split-clamp design and RockShox PushLoc. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement so you can switch your levers on the handlebar and run them moto without hassle. PURE Bladder: SRAM's new brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. SwingLink: Squeeze a new SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That's great, but there's more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It's the perfect balance of power and precision. TPC Plus (Timing Port Closure): A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 RSC Disc BrakeReady for hitting your favourite trails, this MTB hydraulic disc brake features a robust aluminium lever blade that provides durable and dependable braking operation on the toughest of rides. SRAM has also equipped it with a lightweight four-piston S4 caliper that uses four machined and moly-coated aluminium pistons to achieve consistent rollback and easy setup. In addition, its calipers heat shield insulation, Bleeding Edge porting and adaptor technology delivers easier bleeds. Coming kitted out with steel-backed organic brake pads, this model offers powerful braking modulation and control as you navigate your way around the mountain.Adjustable MTB Hydraulic Disc BrakeG2 RSC is the half-ton pickup truck of the mountain bike brake world — dependable, go anywhere, do anything, plenty of power when you need it, and all of the features you need. The G2 RSC is based on the SRAM Code design, so it puts Code-like power and modulation into a mini-Code package. And of course, the signature Guide lever-feel and contact-point adjustability ensure that this brake works great for every rider. The G2 RSC presents a rider-controlled offering with an alloy blade, lever pivot bushings, stainless steel hardware.S4 Lightweight 4-Piston CaliperThe all new S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds.SwingLinkSqueeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision.Useful reach and contact point adjustments for every type of rider. SRAM design its brakes to give each individual rider distinct control of their ride.Added stiffness in the caliper and a new pad compound that offers more bite and really delivers the Mini-Code feel.Engineered for easy installation.Features: Lever Blade Material: Aluminium - Stamped Piston Material: Phenolic Plastic Pad Type: Steel-backed Organic Use: Mountain Bike (MTB) Brake Type: Hydraulic disc brake Number of Pistons: 4 Recommended Rotor Type: 1-piece CenterLine (available separately) Recommended MMX Clamp: Stainless bolt, blk clmp (available separately) Single or Pair: Single Weight: 248gPlease Note: This brake is designed for use with a Matchmaker clamp (combined with shifter) so does not come with its own bar clamp. These bar clamps are sold separately.Technologies: Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 RSC Disc BrakeReady for hitting your favourite trails, this MTB hydraulic disc brake features a robust aluminium lever blade that provides durable and dependable braking operation on the toughest of rides. SRAM has also equipped it with a lightweight four-piston S4 caliper that uses four machined and moly-coated aluminium pistons to achieve consistent rollback and easy setup. In addition, its calipers heat shield insulation, Bleeding Edge porting and adaptor technology delivers easier bleeds. Coming kitted out with steel-backed organic brake pads, this model offers powerful braking modulation and control as you navigate your way around the mountain.Adjustable MTB Hydraulic Disc BrakeG2 RSC is the half-ton pickup truck of the mountain bike brake world — dependable, go anywhere, do anything, plenty of power when you need it, and all of the features you need. The G2 RSC is based on the SRAM Code design, so it puts Code-like power and modulation into a mini-Code package. And of course, the signature Guide lever-feel and contact-point adjustability ensure that this brake works great for every rider. The G2 RSC presents a rider-controlled offering with an alloy blade, lever pivot bushings, stainless steel hardware.S4 Lightweight 4-Piston CaliperThe all new S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds.SwingLinkSqueeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision.Useful reach and contact point adjustments for every type of rider. SRAM design its brakes to give each individual rider distinct control of their ride.Added stiffness in the caliper and a new pad compound that offers more bite and really delivers the Mini-Code feel.Engineered for easy installation.Features: Lever Blade Material: Aluminium - Stamped Piston Material: Phenolic Plastic Pad Type: Steel-backed Organic Use: Mountain Bike (MTB) Brake Type: Hydraulic disc brake Number of Pistons: 4 Recommended Rotor Type: 1-piece CenterLine (available separately) Recommended MMX Clamp: Stainless bolt, blk clmp (available separately) Single or Pair: Single Weight: 248gPlease Note: This brake is designed for use with a Matchmaker clamp (combined with shifter) so does not come with its own bar clamp. These bar clamps are sold separately.Technologies: Contact Point Adjustment: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.