This bolt on front mudguard provides wide coverage, is longer at the front and features a unique flick at the rear to protect you from mud, spray and virtually anything your front wheel throws at you. Its design is specially engineered for efficient performance whether your riding Enduro, Downhill, XC or Trail. This mudguard ensures unmatched protection and its unique polypropylene construction gives a flexible and ultra-durable performance at a low weight. Mudguard Protection from Spray, Dirt and Grit Available in two sizes that are suited to all riding styles and weather and terrain situations, the RRP ProGuard Bolt On Front Mudguard provides protection and style like no other. The Standard offers optimum levels of protection from mud and spray, whereas the Mini provides good protection in a low-profile and more discreet package. Plus, this design features a Seal Shield that keeps dirt away from your fork's seals for increased intervals between servicing and more time on the trails. Compatibility: This direct-mount mudguard is designed for the forks listed below that have the THREADED HOLES in the rear of the fork brace: FOX 32, 34, 36, 49 - Std & Boost (not FOX 40 in 26” or 27.5” without adapter bracket) New Marzocchi forks (using the FOX chassis) Ohlins forks SR Suntour (models with unthreaded straight through the hole in the fork brace require a Sleeve Pack to mount ProGuard BOLT-ON (sold separately)
Designed for the home mechanic. This simple and effective bearing press will extract and insert linkage bearings with ease. Thanks to a CNC construction this tool is ultra durable. A wide range of adaptors are available to suit almost any linkage bearing. The bearing press and adaptors are supplied separately so you can customize the bearing press kit to suit your requirements for greater value for money. Additional Adaptor kits are supplied with full extraction and insertion fittings.NOTE - Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing bore hole
Adaptor Kits only see other listings for RRP bearing press to use with these kitsSee Size guide for kit DetailsThe Bearing Press & Extraction Tool (BPET) is designed for the ‘Home Mechanic’ for use on ‘LINKAGE BEARINGS’ however it still works on many pivot and hub bearings (adaptors & kits are being developed for hubs & pivot bearing use)Instructions for UseFirstly ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert / extract (see list below). You can identify which kit you need either by reading the bearing number written on the rubber seal or you can measure the inner bore race and outer race of the bearing (as shown below) and match it to our list belowExtracting Bearings (RED adaptors) - SOLD SEPARATELYPlace the RED adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.Wind on the main handle until the parts all come together make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup (NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction*) it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuingInserting Bearings (BLUE adaptors) - SOLD SEPARATELYPlace the BLUE adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.Wind on the main handle until all the parts come together the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle the male adaptor will press onto the outer race of the bearing and insert it (NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion*) it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuing
RRP BEARING PRESSPLEASE NOTE THAT ALL ADAPTORS FOR THIS PRESS ARE SOLD SEPERATELY DUE TO THE LARGE VARIETY OF OPTIONSDesigned for the home mechanic. This simple and effective bearing press will extract and insert linkage bearings with ease. Thanks to a CNC construction this tool is ultra durable. A wide range of adaptors are available to suit almost any linkage bearing. (Sold Separately see below)The bearing press and adaptors are supplied separately so you can customize the bearing press kit to suit your requirements for greater value for money. Adaptor kits are supplied with full extraction and insertion fittings.For more information on adaptor kits see the size guide tabExtracting Bearings (RED adaptors) - SOLD SEPARATELYPlace the RED adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.Wind on the main handle until the parts all come together make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup (NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction*) it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuingInserting Bearings (BLUE adaptors) - SOLD SEPARATELYPlace the BLUE adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.Wind on the main handle until all the parts come together the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle the male adaptor will press onto the outer race of the bearing and insert it (NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion*) it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuingGeneral InformationALL BEARING KIT ADAPTORS ARE SOLD SEPARATELY.The BPET is only suitable for frames with flat surfaces to press against. This tool is designed for the competent home mechanic who has reasonable knowledge and experience of working on bikes. This tool is designed to extract and insert linkage bearings however the tool can also be used to press and extract bearings on hubs and freehub bodies(NB: the handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment / incorrect installation)*Bearing Kits 1 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing bore hole
The CX-Guard is a simple front mudguard that significantly reduces the amount of spray and mud thrown up into your face and eyes, it also stops the lower bearing seals from being hammered at high velocity increasing their durability and saving you money. A built-in a cable relief section either side of the RRP logo at the front allows you to use with either cantilever or disc brakes.Key Features:Manufactured from a custom thickness Polypropylene, CX Guard is extremely durable and offers a superb fit..Supplied with bright white zip ties.Design, manufactured and packaged in the UK.
The RRP CX-Guard is a simple front mudguard that significantly reduces the amount of spray and mud thrown up into your face and eyes, it also stops the lower bearing seals from being hammered at high velocity increasing their durability and saving you money. A built-in cable relief section either side of the RRP logo at the front allows you to use with either cantilever or disc brakes.
EnduroGuard is compact, lightweight and highly effective at stopping mud and spray blurring your vision. It's versatile design fits both the front and rear of the bike and is perfect for any mountain bike discipline. Manufactured from a custom thickness Polypropylene, EnduroGuard is extremely durable and offers a superb fit. Unlike other guards of this kind, EnduroGuard features SealGuard which helps prevent mud and water sitting on your fork seals helping to prolong their life and service intervalsStandard size - Fits forks from 80mm to 120mm. Ideal for 4X, Cross County and short travel Trail bikes,Large size - Fits forks from 130mm to 200mm. Ideal for Gravity Enduro and Downhill bikes,Versatile design allows for front and rear fitment,Seal Guard Technology to keep seals clean,Supplied with bright white zip ties,Design, manufactured and packaged in the UK.
Don't be fooled by the name, the EnduroGuard isn't just for Enduro riders as there is a size to suit everybody's riding style. The EnduroGuard has a unique shape as it works on the front or rear of your bike without the need to modify it and as it wraps around either the arch of your forks or seat stays it will keep the mud out of your eyes as well as off your back or posterior. The EnduroGuard is available in 5 eye catching colours to colour match to your bike and riding apparel.Standard: Fits forks with 80 to 120mm travelLarge: Fits forks with 130 to 200mm of travel
Don't be fooled by the name, the EnduroGuard isn't just for Enduro riders as there is a size to suit everybody's riding style. The EnduroGuard has a unique shape as it works on the front or rear of your bike without the need to modify it and as it wraps around either the arch of your forks or seat stays it will keep the mud out of your eyes as well as off your back or posterior. The EnduroGuard is available in 5 eye catching colours to colour match to your bike and riding apparel.Standard: Fits forks with 80 to 120mm travelLarge: Fits forks with 130 to 200mm of travel
Don't be fooled by the name, the EnduroGuard isn't just for Enduro riders as there is a size to suit everybody's riding style. The EnduroGuard has a unique shape as it works on the front or rear of your bike without the need to modify it and as it wraps around either the arch of your forks or seat stays it will keep the mud out of your eyes as well as off your back or posterior. The EnduroGuard is available in 5 eye catching colours to colour match to your bike and riding apparel.Standard: Fits forks with 80 to 120mm travelLarge: Fits forks with 130 to 200mm of travel
Don't be fooled by the name, the EnduroGuard isn't just for Enduro riders as there is a size to suit everybody's riding style. The EnduroGuard has a unique shape as it works on the front or rear of your bike without the need to modify it and as it wraps around either the arch of your forks or seat stays it will keep the mud out of your eyes as well as off your back or posterior. The EnduroGuard is available in 5 eye catching colours to colour match to your bike and riding apparel.Standard: Fits forks with 80 to 120mm travelLarge: Fits forks with 130 to 200mm of travel
Don't be fooled by the name, the EnduroGuard isn't just for Enduro riders as there is a size to suit everybody's riding style. The EnduroGuard has a unique shape as it works on the front or rear of your bike without the need to modify it and as it wraps around either the arch of your forks or seat stays it will keep the mud out of your eyes as well as off your back or posterior. The EnduroGuard is available in 5 eye catching colours to colour match to your bike and riding apparel.Standard: Fits forks with 80 to 120mm travelLarge: Fits forks with 130 to 200mm of travel