Eliminate those rattling valves for good! Simply sticks over your valve.Key Features:Durable rubber ensure ValveGaurds are re-usable when changing tubes.The adhesive is gentle and can be used on any rims, including carbon.Includes 6 ValveGuards and 4 oval/2 thin FrameGuards to prevent cable rub.Made in the UK..
EnduroGuard is compact lightweight and highly effective at stopping mud and spray blurring your vision. It’s versatile design fits both the front and rear of the bike and is perfect for any mountain bike discipline. Manufactured from a custom thickness Polypropylene EnduroGuard is extremely durable and offers a superb fit. Unlike other guards of this kind EnduroGuard features SealGuard which helps prevent mud and water sitting on your fork seals helping to prolong their life and service intervals. Available in 2 sizes and 12 colours Standard size - Fits forks from 80mm to 120mm. Ideal for 4X Cross County and short travel trail bikes. Large size - Fits forks from 130mm to 200mm. Ideal for Gravity Enduro and Downhill bikes. Versatile design allows for front and rear fitment Seal Guard Technology to keep seals clean Supplied with bright white zip ties Design manufactured and packaged in the UK. New features on V4 model include; Turndown front spray flap adds spray protection Stealthier graphics with black laquer on black material Additional snap-off holes for BOOST forks Additional snap-off holes for reverse arch forks (Manitou/DVO) Width of guard and Seal Guard increased to be compatible with BOOST forks ENDUROGUARD logo replaced with RAPID RACER PRODUCTS logo
RRP BEARING PRESSPLEASE NOTE THAT ALL ADAPTORS FOR THIS PRESS ARE SOLD SEPERATELY DUE TO THE LARGE VARIETY OF OPTIONSDesigned for the home mechanic. This simple and effective bearing press will extract and insert linkage bearings with ease. Thanks to a CNC construction this tool is ultra durable. A wide range of adaptors are available to suit almost any linkage bearing. (Sold Separately see below)The bearing press and adaptors are supplied separately so you can customize the bearing press kit to suit your requirements for greater value for money. Adaptor kits are supplied with full extraction and insertion fittings.For more information on adaptor kits see the size guide tabExtracting Bearings (RED adaptors) - SOLD SEPARATELYPlace the RED adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.Wind on the main handle until the parts all come together make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup (NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction*) it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuingInserting Bearings (BLUE adaptors) - SOLD SEPARATELYPlace the BLUE adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.Wind on the main handle until all the parts come together the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle the male adaptor will press onto the outer race of the bearing and insert it (NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion*) it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuingGeneral InformationALL BEARING KIT ADAPTORS ARE SOLD SEPARATELY.The BPET is only suitable for frames with flat surfaces to press against. This tool is designed for the competent home mechanic who has reasonable knowledge and experience of working on bikes. This tool is designed to extract and insert linkage bearings however the tool can also be used to press and extract bearings on hubs and freehub bodies(NB: the handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment / incorrect installation)*Bearing Kits 1 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing bore hole
The perfect last minute mudguard. Very effective and fast fitting RearGuard simply attaches the saddle rails with 2 velcro straps. It takes only 30 seconds! RearGuard offers great protections for your rear whether your on or off road. Thanks to a custom thickness polypropylene RearGuard is not flimsy but also offers an excellent fit unlike some guards available. The tough fitting strap will work with any post including aero posts. 3 versions currently available. Standard - The original design from RRP- A slightly sleeker model with 6 fixable velcro slots (see pictures)V1 - An updated version of the original design with a longer profile and two velcro slots (see pictures)V2 - A further update to the already updated version of the Rearguard. With a longer (Again) and wider profile with perforated lines implimented to highten the overall protection and effectiveness of the guard. Ideal for road mountain and cyclo-cross bikesOne size fits allVelcro fitting strap includedMade in the UK33g
Adaptor Kits only see other listings for RRP bearing press to use with these kitsSee Size guide for kit DetailsThe Bearing Press & Extraction Tool (BPET) is designed for the ‘Home Mechanic’ for use on ‘LINKAGE BEARINGS’ however it still works on many pivot and hub bearings (adaptors & kits are being developed for hubs & pivot bearing use)Instructions for UseFirstly ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert / extract (see list below). You can identify which kit you need either by reading the bearing number written on the rubber seal or you can measure the inner bore race and outer race of the bearing (as shown below) and match it to our list belowExtracting Bearings (RED adaptors) - SOLD SEPARATELYPlace the RED adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.Wind on the main handle until the parts all come together make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup (NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction*) it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuingInserting Bearings (BLUE adaptors) - SOLD SEPARATELYPlace the BLUE adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.Wind on the main handle until all the parts come together the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle the male adaptor will press onto the outer race of the bearing and insert it (NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion*) it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuing
Some SR Suntour forks have a straight through unthreaded hole in the centre of the fork brace, you can purchase a sleeve pack that allows you to fit the ProGuard Bolt-on to the fork.
Perfect for adding a touch of extra colour to your ProGuard Bolt-on.Durable, high-tack stickers.
The CX-Guard is a simple front mudguard that significantly reduces the amount of spray and mud thrown up into your face and eyes, it also stops the lower bearing seals from being hammered at high velocity increasing their durability and saving you money. A built-in a cable relief section either side of the RRP logo at the front allows you to use with either cantilever or disc brakes.Key Features:Manufactured from a custom thickness Polypropylene, CX Guard is extremely durable and offers a superb fit..Supplied with bright white zip ties.Design, manufactured and packaged in the UK.
The new neoprene mudguard called NeoGuard is specifically designed to prevent mud and spray from getting in your face and eyes. Traditional mudguards are fragile and can hold on to pounds of unwanted mud affecting your riding performance and slowing you down. The NeoGuard™ throws the mud off every time the fork compresses keeping your bike light and agileThe Features of the Neoguard Evil Eyes - Front Mudguard are:It is fast and simple to fit and very lightweight, this mudguard is perfect for both downhill or crosscountry and absolutely essential for the weekend warrior. Tuck it into your backpack just in case conditions turn nasty, you|ll rarely get mud in your eyes againSimple to fit and very light weight Easily stored and carried
The new neoprene mudguard called NeoGuard is specifically designed to prevent mud and spray from getting in your face and eyes. Traditional mudguards are fragile and can hold on to pounds of unwanted mud affecting your riding performance and slowing you down. The NeoGuard™ throws the mud off every time the fork compresses keeping your bike light and agileIt is fast and simple to fit and very lightweight, this mudguard is perfect for both downhill or crosscountry and absolutely essential for the weekend warrior. Tuck it into your backpack just in case conditions turn nasty, you|ll rarely get mud in your eyes againSimple to fit and very light weight Easily stored and carried
Unmatched protection from mud and spray. The perfect guard for enduro or downhill racers and essential for weekend warriors seeking the very best protection. ProGuard maximises tyreclearance and reduces mud clogging unlike other mudguards of this style. 3 sizes: Mini: Ideal for good all-year-round good protection that’s more discreet, Standard: Superb coverage and protection, Max: 21mm longer than standard at the front and 68mm longer at therear. Offers the very best levels of protection,. Specification: Longer front minimises high speed spray,Fork brace indent allows for greater tyre clearance,Slots and holes for easy installation with cable ties (included) or velcro straps (sold separately),Rear flick offers even more protection especially whilst cornering,Seal protection increased with our acclaimed Seal Shield design,Compatible with 26”, 27.5” and 29” forks (reverse arch not compatible) with tyres up to 3”,Made with RRP’s unique polypropylene mix which gives great flexibility, durability and strength,Matte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protection,Designed, manufactured and packed in the UK,Mini: 100g, Standard: 119g, Max: 133g.
ProGuard BOLT-ON is the first large direct-mount mudguard of its type. It offers outstanding protection from mud and spray, and provides a slick factory look thanks to not requiring zip ties or velcro straps to secure it in place.Key Features: 2 sizes: Standard offers high levels of protection. Mini is ideal for all year round offering good protection that’s more discreet, Easy to install or remove with no zip ties or velcro straps, Height adjustability by 6mm and angle adjustability for better fit if needed via 2 tilt brackets supplied, 2 Thick rubber pads on the sides protect your forks, Matte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protection, Long front to protect from high speed mud and spray, Smaller turn down at front for better tyre clearance and to reduce mud blockages, Long rear with flick design offers more protection especially during cornering, Seal Shield increases protection and extends fork service intervals, Made with RRP’s unique polypropylene mix which gives great flexibility, durability and strength, Standard: 130g, Mini: 104g,.Designed for the forks listed below that have a threaded hole in the rear of the fork brace: FOX 32, 34, 36, 49 - Std & Boost (not FOX 40 in 26” or 27.5” without adapter bracket), New Marzocchi forks (using the FOX chassis), Ohlins forks, SR Suntour (models with unthreaded straight through hole in the fork brace require a Sleeve Pack to mount ProGuard BOLT-ON (sold separately), Designed, manufactured and packed in the UK.