Eliminate those rattling valves for good! Simply sticks over your valve.Key Features:Durable rubber ensure ValveGaurds are re-usable when changing tubes.The adhesive is gentle and can be used on any rims, including carbon.Includes 6 ValveGuards and 4 oval/2 thin FrameGuards to prevent cable rub.Made in the UK..
Some SR Suntour forks have a straight through unthreaded hole in the centre of the fork brace, you can purchase a sleeve pack that allows you to fit the ProGuard Bolt-on to the fork.
Perfect for adding a touch of extra colour to your ProGuard Bolt-on.Durable, high-tack stickers.
Perfect for adding a touch of extra colour to your ProGuard.Key Features:Durable, high-tack stickers.
The CX-Guard is a simple front mudguard that significantly reduces the amount of spray and mud thrown up into your face and eyes, it also stops the lower bearing seals from being hammered at high velocity increasing their durability and saving you money. A built-in a cable relief section either side of the RRP logo at the front allows you to use with either cantilever or disc brakes.Key Features:Manufactured from a custom thickness Polypropylene, CX Guard is extremely durable and offers a superb fit..Supplied with bright white zip ties.Design, manufactured and packaged in the UK.
The new neoprene mudguard called NeoGuard is specifically designed to prevent mud and spray from getting in your face and eyes. Traditional mudguards are fragile and can hold on to pounds of unwanted mud affecting your riding performance and slowing you down. The NeoGuard™ throws the mud off every time the fork compresses keeping your bike light and agileThe Features of the Neoguard Evil Eyes - Front Mudguard are:It is fast and simple to fit and very lightweight, this mudguard is perfect for both downhill or crosscountry and absolutely essential for the weekend warrior. Tuck it into your backpack just in case conditions turn nasty, you|ll rarely get mud in your eyes againSimple to fit and very light weight Easily stored and carried
The new neoprene mudguard called NeoGuard is specifically designed to prevent mud and spray from getting in your face and eyes. Traditional mudguards are fragile and can hold on to pounds of unwanted mud affecting your riding performance and slowing you down. The NeoGuard™ throws the mud off every time the fork compresses keeping your bike light and agileIt is fast and simple to fit and very lightweight, this mudguard is perfect for both downhill or crosscountry and absolutely essential for the weekend warrior. Tuck it into your backpack just in case conditions turn nasty, you|ll rarely get mud in your eyes againSimple to fit and very light weight Easily stored and carried
Unmatched protection from mud and spray. The perfect guard for enduro or downhill racers and essential for weekend warriors seeking the very best protection. ProGuard maximises tyreclearance and reduces mud clogging unlike other mudguards of this style. 3 sizes: Mini: Ideal for good all-year-round good protection that’s more discreet, Standard: Superb coverage and protection, Max: 21mm longer than standard at the front and 68mm longer at therear. Offers the very best levels of protection,. Specification: Longer front minimises high speed spray,Fork brace indent allows for greater tyre clearance,Slots and holes for easy installation with cable ties (included) or velcro straps (sold separately),Rear flick offers even more protection especially whilst cornering,Seal protection increased with our acclaimed Seal Shield design,Compatible with 26”, 27.5” and 29” forks (reverse arch not compatible) with tyres up to 3”,Made with RRP’s unique polypropylene mix which gives great flexibility, durability and strength,Matte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protection,Designed, manufactured and packed in the UK,Mini: 100g, Standard: 119g, Max: 133g.
ProGuard BOLT-ON is the first large direct-mount mudguard of its type. It offers outstanding protection from mud and spray, and provides a slick factory look thanks to not requiring zip ties or velcro straps to secure it in place.Key Features: 2 sizes: Standard offers high levels of protection. Mini is ideal for all year round offering good protection that’s more discreet, Easy to install or remove with no zip ties or velcro straps, Height adjustability by 6mm and angle adjustability for better fit if needed via 2 tilt brackets supplied, 2 Thick rubber pads on the sides protect your forks, Matte textured finish with gloss highlights, plus sticker recess for easy fit and sticker protection, Long front to protect from high speed mud and spray, Smaller turn down at front for better tyre clearance and to reduce mud blockages, Long rear with flick design offers more protection especially during cornering, Seal Shield increases protection and extends fork service intervals, Made with RRP’s unique polypropylene mix which gives great flexibility, durability and strength, Standard: 130g, Mini: 104g,.Designed for the forks listed below that have a threaded hole in the rear of the fork brace: FOX 32, 34, 36, 49 - Std & Boost (not FOX 40 in 26” or 27.5” without adapter bracket), New Marzocchi forks (using the FOX chassis), Ohlins forks, SR Suntour (models with unthreaded straight through hole in the fork brace require a Sleeve Pack to mount ProGuard BOLT-ON (sold separately), Designed, manufactured and packed in the UK.
Designed to help protect your shock, linkages and bearings from getting hammered by mud, dirt and water at high velocity from your back wheel. This helps to minimise cleaning post ride and maximise intervals between services.Key Features:ProGuard REAR’s versatile design allows for easy fitment on a huge range of bikes. ,43 snap-off top holes to fit braces between the seatstays whether they’re straight, rasied or dropped (including those with supporting struts),Indent to create 4mm of additional tyre clearance (also fits the large raised brace on the Merida e-bike),Side arms designed to fit conventional seatstays (that go to centre of wheel), and offset seatstays (raised up from centre of wheel),Recess to protect sticker allowing you to match your ProGuard FRONT mudguard ,Made with RRP’s unique polypropylene mix which gives great flexibility, durability and strength,Same gloss` finish as the ProGuard FRONT. If you prefer a matte finish you can easily do this by spraying it with GT85 (after applying any stickers),6 zip ties are provided,64g,Designed, manufactured and packed in the UK.
Designed for the home mechanic. This simple and effective bearing press will extract and insert linkage bearings with ease. Thanks to a CNC construction this tool is ultra durable. A wide range of adaptors are available to suit almost any linkage bearing. The bearing press and adaptors are supplied separately so you can customize the bearing press kit to suit your requirements for greater value for money. Additional Adaptor kits are supplied with full extraction and insertion fittings.NOTE - Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing bore hole
The perfect last minute mudguard. Very effective and fast fitting, RearGuard simply attaches the saddle rails with 2 velcro straps. It takes only 30 seconds! RearGuard offers great protection for your rear whether you're on or off road. Thanks to a custom thickness polypropylene, RearGuard is not flimsy, but also offers an excellent fit, unlike some guards available. The tough fitting strap will work with any post including aero posts. Key Features:Ideal for road, mountain and cyclo-cross bikes.One size fits all.Velcro fitting strap included.Made in the UK.33g.